button animated with mouseover delay / mouseout/mouseouthandler() actions

Hi all

I have a symbol on the edge that fades into a button, then stops. I would like for the mouse over and mouse actions for this button to be disabled during the period and then active button fade once the button appeared entirely. Fundamentally, a problem occurs when a user hovers over the button when the symbol is initially the discoloration and it causes unwanted results. I would appreciate if anyone can offer some insight on how to delay actions until the playahead reaches a certain point in the timeline panel.

Fine thanks

DH333

Replace the code in mouseout/mouseouthandler() with the following:

{if (sym. GetPosition() > 420)

sym.playReverse ();

}

HTH,

Vivekuma

Tags: Edge Animate

Similar Questions

  • How to play animation on Mouseover and mouseout/mouseouthandler() inversion?

    0 down vote favorite

    I am trying to create a simple animated navigation bar. I want to mouseover an image and you have an animation playing, then when you mouseout/mouseouthandler() the animation will play in reverse.

    I can get the animation to play on mouseover, but as soon as I put in the mouseout/mouseouthandler() code, it does not work. I'm completely new to Board, so if someone can give me a simple explanation on how to play/reverse animation on mouseover/out, I would really appreciate it.

    For now, I have an image, converted to a symbol, with another image (nav_on_1) nested inside. Nested inside the image is animated with the label "nav_on_1_play".

    My code for the passage of the mouse is below:

    SYM.$("nav_on_1"). Show();
    SYM. Play ("nav_on_1_play");

    Thanks for the comments, I was actually able to understand why it didn't work.

    I had to put on the image mouseenter mouseleave on the symbol that drives above it then initial. At the beginning I was putting the mouseover/out two on just the initial image, so when the symbol was animating and covering, the mouseout/mouseouthandler() was not set.

  • buttons animated with 5 actions

    Hello world!

    I am needing help on actions of rollover. Below is a link to the file

    My buttons, I have 3 actions:

    1 passage of the mouse: the yellow selection rectangle that comes alive (below is the code for the action)

    SYM. Play ("onHover");

    2 mouseout/mouseouthandler(): the yellow selection rectangle moves in the opposite direction

    sym.playReverse ("out");

    3. click on: rectangles move to a position in the volute (Note: scrollTop changes with each rectangle)

    SYM.$("rectangle"). Animate({scrollTop:400},1500);

    what I need are the 2 following things:

    A-I would like to now the yellow selection rectangle that comes alive to stay in position when the mouse is clicked & anime out on mouseout/mouseouthandler(). It should animate on when you click the next button.

    I used "mousedown: but it does not work-must click conflict."

    SYM. Play("on");

    B - in addition, I would like the yellow highlight to be 'on' when the page opens

    Please fix my clumsy code on the numbers 1-3. It is buggy and I don't know there is a much better way to do it!

    Here is the link to my file: https://www.yousendit.com/download/UVJpQ3QrUzc5NVZ2TzhUQw

    Thank you all so much for your help!

    -sharon

    Hello Sharon, here is your file with overview of fixed mouse interactions.

    Example:

    http://www.timjaramillo.com/code/edge/button_active_states/jQueryRebuiltv0_v4.html

    Source:

    www.timjaramillo.com/code/Edge/_source/button_active_states.zip

    It is essentially to set a variable to the active button, to Stage.compositionReady. On each button mouseover/mouseout/mouseouthandler(), I check this variable with an "if" statement, and if the current button being hit is active, then don't start the anims more input/output.

  • Is there a way to keep an animation playing for a mouseout/mouseouthandler() event when you start a new?

    I have a few buttons on mouseover that they animate the scale upwards and mouseout/mouseouthandler() they scale back down. This works great except the scenario when the a button on the mouse user then immediately mouse the button following the animation on the first button suddenly stops and the animation starts on the current button. Is there a way to keep the animation plays for the first button AND have the animation working set for the second button?

    I downloaded a quick demo to illustrate what I mean. Also, I downloaded the project file if anyone can find a solution. Thank you!

    Dropbox - edgeAnimateButtonSample.zip

    You must create two symbols for these two buttons, so that the two can play at the same time.

    I created an example for you @ https://www.dropbox.com/s/e59agt7mr8r785l/newedgeAnimateButtonSample.rar?dl=0

    HTH,

    Vivekuma

  • Why the MovieClip MouseOver and mouseout/mouseouthandler() times called on MouseOver

    Hello


    I have a simple clip to which I link two events

    1 - MouseOver

    2 - Mouseout/mouseouthandler()


    in these events, I just followed simple text


    But the problem is when I take my mouse over the clip, the two events called retracing the string in the output panel


    Infact, things must be done like that on mouse over, his text is printed and when I take my mouse off [out] event mouseout/mouseouthandler() movieClip must be called.

    Import fl. Motion . Color ;

    Import flash. View . MovieClip ;

    Import flash. events . MouseEvent ;        

    var mc: MovieClip = new MovieClip();    

    MC. Graphics . lineStyle (2, 0xCCCCCC)    

    MC. Graphics . drawRect (20, 50, 160, 160) ;    

    MC. Graphics . endFill ();    

    ce . addChild (mc) ;               

    MC. addEventListener ()MouseEvent. MOUSE_OVER onMouseOverMC );        

    MC. addEventListener ()MouseEvent. MOUSE_OUT onMouseOutMC );                

    function onMouseOverMC (e:MouseEvent)

    {trace()'MouseOverMC called' () } ; }        

    function onMouseOutMC (e:MouseEvent)

    {trace()'MouseOutMC called' () } ; }

    The problem is that you only draw the lines of the rectangle and not fill up, so the only interactive portion of the mc is the lines forming the border.  Try to add the code to beginFill and see if that helps...

    mc.graphics.beginFill (0xFFFFFF);

  • MouseOver and mouseout/mouseouthandler() way too slow. Incredibly slow.

    Mouse above and outside (especially out) is much too slow. Incredibly slow. Mouse on sometimes just not all. I tried to play with the frequency: 1, 5, 6, 10... but no change was visible.

    var frequency = 3;
    stage.enableMouseOver(frequency);
    this.myObject.addEventListener("mouseover", fl_MouseOverHandler.bind(this));
    function fl_MouseOverHandler()
    {
      this.myObject.gotoAndStop("over");
    }
    this.myObject.addEventListener("mouseout", fl_MouseOutHandler.bind(this));
    function fl_MouseOutHandler()
    {
        this.myObject.gotoAndStop("out");
    }
    
    

    It's because you have the frequency adjusted to only 3 ("var frequency = 3;"), which means that the position of the mouse is only checked 3 times per second.  Increase in the frequency should improve things.

  • Stop the sound on mouseout/mouseouthandler() - how/where add code

    I read through several threads, but I can't figure out how or where to add the code for the sound to stop on mouseout/mouseouthandler(). I read the messages that buzz.js might be able to help, but I need advice to apply it.

    The project is included in the download. The US Landmarks each have an animation that starts a stopover on mouseover and mouseout/mouseouthandler(). I need the sound that goes with each animation to do the same.

    Firefox handles its OK at first but then seems to get glichy. Chrome keeps all the loop sounds whenever I mouseover.

    https://www.dropbox.com/s/x2iih9sgqff316i/SummerTips_052114_0430.zip  I apologize for the large file. I am looking for an alternative to a single sound file that is larger than 6 MB.

    It is my first project in environmental assessment. I learned EA as I build it (conversion of project Flash that someone else did a few years ago). I'm sure that there are more effective ways to do a lot of what I have here, but it works in the way he needs, except for the sound.

    I am open to any suggestion. Thanks in advance for the help.

    Lynn

    Hello

    There are some errors in your code above:

    In the mouseenter event:

    sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ("enter");

    There's no label "enter" for the audio element. It should be:

    sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ();

    The biggest problem is in the mouseleave event:

    sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .stop ("exit");

    The audio element is not a stop method. You must use the break and with no label in there, like this:

    sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] () .pause;

    HTH,

    Joe

  • MouseOver / mouseout/mouseouthandler() problem with animate

    Hello guys,.

    I am newbie on the edge and I created a basic circle animated border. And I wanted to do when mouseover circle goes from 0%, when mouseout/mouseouthandler() it goes to 100% again.

    But he has a problem, that I did not understand, how can I fix? I add project under the video files.

    http://fatihdemir.org/test.rar

    Thank you.

    Also you need to update your version to its own version of the previous version there is an update to correct the problems. Go tho the link below - login in the cloud and choose 2014 version.

    https://creative.Adobe.com/products/animate

    Alternatively, you can upgrade to the current version.

    Because you can have both versions, if you update to the current version and want to have both versions, first update again, and then use the link above to reinstall the previous version.

    The process I described above will work on both versions.

    previous version of the corrected file:

    test.zip - box

  • MouseOver woes... bearings stick and not mouseout/mouseouthandler()

    I've used this method before, but this time, it does not work for me. The files are:

    https://www.dropbox.com/s/ccgapo20p233h7z/rollover.zip

    Basically, there are a top navigation bar on the right. It's very simple. Six symbols. Everyone has half a second animation of discoloration of the black box in 0-100%. Stop actions on 0 and half a second. Have this on the root for each button on mouseOver:

    var myBtnExploration = sym.getSymbol ("btnExploration");

    myBtnExploration.play ();

    and to mouseout/mouseouthandler():

    var myBtnExploration = sym.getSymbol ("btnExploration");

    myBtnExploration.playReverse ();

    of course, references to the symbols are different for each button. Nothing crazy.

    So what happens sometimes is you overthrow the first button you select (any one) and the effect is very good. Anything after that and who knows. Usually, it sticks on the rollover on mouseout/mouseouthandler() State. Anyone know why this is happening and what could be the solution?

    Hi ladobeugm,

    Orders play() and playReverse() in conflict with the sym.stop () to the triggers that are in the start position. A school of Palo Alto psychologist would say that you practice the double bind: crazy 'Play!', 'Stop!', which is one of the best ways to do the things (and people)

    You can get rid of the triggers to 0 ms: simply uncheck the autoplay of each of your symbols buttons property (in the dialog box when you convert to symbol; or after editing the symbol).

    But you can not get rid of the triggers to 500 ms, at the end of the Tween. Play() and playReverse() have a second parameter, Boolean, which is true by default, which means 'play the relaxation to the starting position.

    Yes .playReverse (500, false); solves the problem.

    Gil

  • MouseOver/mouseout/mouseouthandler() simple effect, but cannot put it together

    Hey there. Here's a pretty easy question I think but I just looked everywhere and I can not understand how to operate...

    I want just a rectangle to stay visible while mouseover and fade out after mouseout/mouseouthandler().

    Any advice?

    Thanks in advance!

    I hope that you can work with the following.  Forget that you already unless it's a special draw - you only need the chart, not the interpolation of timeine.

    Simply draw a rectangle on the stage and convert it to a movieclip and give it an instance name of "rect" (where it says in the properties panel).  Then place this code in the timeline on a layer actions.

    Rect.Alpha = 0;

    rect.addEventListener (MouseEvent.MOUSE_OVER, showRect);
    rect.addEventListener (MouseEvent.MOUSE_OUT, startFade);

    function showRect(evt:MouseEvent):void {}
    {if (Rect.hasEventListener (Event.ENTER_FRAME))}
    rect.removeEventListener (Event.ENTER_FRAME, fadeRect);
    }
    Rect.Alpha = 1.0;
    }

    function startFade(evt:MouseEvent):void {}
    rect.addEventListener (Event.ENTER_FRAME, fadeRect);
    }

    function fadeRect(evt:Event):void {}
    If (rect.alpha > 0) {}
    Rect.Alpha-= 0.05;
    } else {}
    rect.removeEventListener (Event.ENTER_FRAME, fadeRect);
    Rect.Alpha = 0;
    }
    }

  • Why do the mouseout/mouseouthandler() and mouseOver not work correctly when you use a dynamic textfield?

    Hello

    I made a movieclip with instance name: cs_btn

    Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
    In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.

    It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
    also when you hover over the textfield object. Even when I turned the selectable property.

    Any idea of what is the cause?

    In the main timeline, I made this script:

    function cs_buttonEvent(event:MouseEvent):void {}

    trace (Event.type);

    Switch (event.type) {}
    case "mouseDown":
    event.currentTarget.gotoAndPlay ("down");
    break;
    case "mouseUp":
    event.currentTarget.gotoAndPlay ("up");
    break;
    case 'mouseOver ':
    event.currentTarget.gotoAndPlay ("over");
    break;
    case 'mouseout/mouseouthandler() ':
    event.currentTarget.gotoAndPlay ("out");
    break;
    by default:
    trace ("mouse five event");
    break;
    }

    }

    cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
    cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
    cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
    cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);

    You can assign the check fake gold button mouseChildren property the
    target in the event handler.

    function cs_buttonEvent(event:MouseEvent):void {}

    If (event.target! = cs_btn) return; bug out

    trace (Event.type);

    Switch (event.type) {}
    case "mouseDown":
    event.currentTarget.gotoAndPlay ("down");
    break;
    case "mouseUp":
    event.currentTarget.gotoAndPlay ("up");
    break;
    case 'mouseOver ':
    event.currentTarget.gotoAndPlay ("over");
    break;
    case 'mouseout/mouseouthandler() ':
    event.currentTarget.gotoAndPlay ("out");
    break;
    by default:
    trace ("mouse five event");
    break;
    }

    }

  • How can I get symbol mouseover, mouseout/mouseouthandler(), cursor to work on my project?

    I am able to make a symbol of a box and grouped text work on a stage empty. But when I do the same construction on my project the cursor does not appear and the mouse such as mouseover/mouseout/mouseouthandler() operations does not work. I use a symbol rather than a simple element so that I can develop animation i9n the isolation mode. What I am doing wrong? Help!

    Ok. Learn more about your symbol because there is no reason why it wouldn't work on a symbol. Note that if you use the code, you use jquery and not getSymbol to add the sense of cursor

    SYM, $('"symbolName"). CSS({"Cursor":"pointer"});)

    not

    SYM, getSymbol('"symbolName"). CSS({"Cursor":"pointer"});)

    If you have an element inside the symbol where you want that mouse events occur, then you are targeting these elements and not the symbol itself.

    Then, it is possible that your symbol lies beneath a transparent surface - could be a div for example. In this case your mouse event will not work. You need change the position of z-index or symbol layer.

    Hope it makes sense.

  • How can I get the mouseover/mouseenter State remain until mouseout/mouseouthandler()/mouseleave?

    I created a simple project that consists of a single image with rollover effects. When the mouse pointer moves over an image, I want something to separate the text to display. I want the text remains displayed until the mouse pointer moves out of the picture.

    I coded this and it works, except for one detail: when the mouse pointer is over a picture, the corresponding text appears for a few seconds before being hidden again.

    I have tried both mouseover/mouseout/mouseouthandler() and mouseenter/mouseleave, but both produce the same results.

    I tested in Chrome and Firefox, so it doesn't seem to be a browser problem.

    I figured this out. I'm hiding the text elements using keyframes in the timeline that define the Display OFF property.

    I took these keyframes and used instead the event compositionReady on the scene to hide the text elements.

    Now, each item text is displayed for as long that the mouse pointer is on the corresponding element.

  • image on mouseover close on mouseout/mouseouthandler()

    Howdy,
    I have an imagemap with 4 sections. I want to mouseover and show this picture and close on mouseout/mouseouthandler(). Openbrowser windows behavior is erratic in Firefox and requires the window closed. Is there an extension or a script that will run the task I want? Thank you. Karl

    You can view the victim to:
    New Page of book of Doris Young

    Never mind! I rebuilt with absolute ShowHideLayers and CSS positions. It works in both browsers as expected. Thanks anyway. Karl

  • change the image on mouseover/mouseout/mouseouthandler()

    Hello everyone, today I tried to edit an image/symbol when I hover over the image

    I tried

    My symbol is pink_dot_new.png

    Then I add

    MouseOver

    .Attr ("src", "images/Pink_dot_light.png") $(this.lookupSelector ("pink_dot_new"));

    mouseout/mouseouthandler()

    $(this.lookupSelector ("pink_dot_new")) .attr ("src", "images/Pink_dot_light.png");

    And

    MouseOver

    $(this.lookupSelector ("ImageHolder")) .css ("background-image ',' url(images/Pink_dot_light.png)'");

    mouseout/mouseouthandler()

    $(this.lookupSelector ("ImageHolder")) .css ("background-image ',' url(images/Pink_dot_light.png)'");

    I don't know what I'm missing? Can anyone help?

    Sorry I was out for a while. So I didn't want the name of the image, but its name as it appears in the assets Panel - most likely, it is Pink_dot.

    So here's what you have to change the image

    I'm not sure what the name of your symbol is in the assets Panel, but in your code, it seems that your symbol is named _dot_new

    sym.getSymbol('___dot_ne__w').$('__Pink_dot__').css ({'background-image': 'url ("images/Pink_dot_light.png")'});

    addresses the symbol + addresses the image the name of the new image of the spirit element + css

    Incidentally, you might want to add: 'background-repeat': 'no-repeat '.

    Example here:

    dot images.zip - box

Maybe you are looking for

  • Safari and Firefox Log-in problems

    I have problems to connect to some Web sites.  In particular, Facebook and Spotify. When I open either my wife login/password details are displayed.  I change mine by changing my user name and then selecting my details in the automatic fill pop - up.

  • Satellite L350-170 - recovery disk does not work

    Hello I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work. I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar

  • How to convert doc pdf to word documents

    I have a few files that I can't open now because they are in a PDF conversion and only, I don't know how it happened but I do not know how to recover my original by doc and I need them as soon as POSSIBLE. HELP PLEASE!

  • HP 15 r036tu: unable to boot from USB

    I'm unable to boot from a USB key, I started correctly the USB, it works on other laptops but not on mine. I also changed my boot order in the bios, but still, I'm not able to boot from USB. I read somewhere that it's because of security windows 8.1

  • Vista Ultimate Disk Image

    Looking for advice on how to create a backup disk image.  In addition, I am looking for advice on the recovery of documents, etc... I could not restore a prior to installation on my machine, but have the folder windows.old on the main hard drive