Button compile errors

Similar Questions

• Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Can you indicate the corresponding code and the full error message?  Before the race going in your publication of Flash settings and select the option to enable debugging - it can help by adding information in the error message.

• The missing compiler error output

  I hope it is a simple:

  When I compile a program and there are errors and/or mise put in custody, opens the window output to build, but the error messages are not listed!  All this shows, it is:

  Build status (MyProject.prj - Debug)
  MyModule.c
  Build failed.

  If I click on the button 'Compile' 4 or 5 times in a row, finally the error list appears.  I can't understand any logic for when the error list appears or fails, but eventually we get half a dozen attempts.  I checked all the settings of the compiler and appropriate warnings are activated, etc.  What am I missing?

   

  
  I use Version 13.0.0 (632)

  Thank you

  YES!  I'm compiling on a network drive.  I've moved the project on the local hard drive and poof, it seems to work fine now.  I'll know for sure after working with her during the day, but I deliberately introduced warning and error conditions, and he reported it correctly.

  Thank you!

  Mike

• Microsoft JScript compilation error

  I get a daily puzzles from jigzone.com. As I changed a directv satalite connection dial I get this error. While the puzzle is loading this box comes up saying
  Microsoft JScript compilation error
  EXPECTED
  Ok
  I click on OK, then back to the top and I click OK again. then the puzzle is in charge. Is there something I can do to remedy this?

  Make sure that your java is up to date by downloading the latest files from their site

  http://Java.com/en/

  Simply click on the big blue button and you won't go wrong.

• "Compile error. Unknown error. "or"Multiplexing gone bad"

  Hello people,

  When I try to export my video to 4 minutes (just a simple video in 1080 p: some only clips with a soundtrack, a few titles and, despite a sometimes stabilizer no effect), a "compilation error. Unknown error "or a"multiplexing has failed-error"occurs. For me, it seems that the program chooses just one of two errors, so there will be no export my file... I can't find a reason for these errors.

  I don't know how to get rid of the error division multiplexing (only export the video or audio), but as soon as I get rid of this error, the compilation error occurs, and I don't know how to get rid of that one... I advised Adobe page on the compile error, but none of the advice they gave worked for me...

  I decided to restart the editing of the video. This time that I exported every time after I was 30-second edition. It worked twice (so that total I 1 minute exported), but the third time the error reappears. I removed the third 30 seconds I edited (so I had left only 1 minute again), and I've tried if the first 30 sec still wanted to export. But this time, guess what, errors have come to the top and it wouldn't export... PE will not export the exact same files as it has exported before more!

  I think, something is wrong in the program itself, but tproblem could my computer als. Sometimes while editing a "Premiere Elements has stopped working - popup" appears and then I have no choice but to close the program (what is a sign of a bad work computer?). And tproblem that it could even be forced by me, something wrong...

  
  

  Anyone know anything about these errors and how to heal?

  
  

  Looking forward to your reply!

  
  

  By the way: English is not my mother tongue, so don't go and hate on my English please!
  

  02010 m

  Your English is very good. But we need more details. We understand the problem you have described.

  1. what version of Premiere Elements and on what operating system works - it?

  2. What are the properties including the extension of what you put on your project timeline?

  What have you (manually) or project (automatically) defined as a project preset to match the properties of your media source on the Timeline?

  3. What is your intended export - version 13/13.1 if, Publish + share/computer/and then what? And what you define as the pre-selection for export? You use the default settings of the selected preset, or customize the selected have been preset on his tab multiplexer tab button and advanced video, Audio tab? What are your settings tab multiplexer?

  4. have you developed the timeline to help - + cursor above the timeline and looked for irregularities in all tracks (used or others that you feel is not used).

  a. gaps in the timeline summary

  b. debris (remains) scattered around the content of the tracks

  placement of c. of video and/or audio transitions, titles

  I guess there is no marker menu timeline or movie Menus involved in all this. I guess correctly?

  Before we get to the point where we suggest program uninstall / free ccleaner Cross (parts regular and register), reinstall it with antivirus and firewall disabled, let us

  a. make sure that the structure of the timeline has no flaws inside

  b. determine if delete the parameter of the item first (Adobe Premiere elements Prefs) editor has an impact on one of the problems you described

  If Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  Version number

  and in the version number the Adobe Premiere elements Prefs file folder that you delete... If that does not work, delete the record of the number of full version in which Adobe Premiere elements Prefs file exists. Be sure to work with folder Option show hidden files, folders and drives on.

  Please review and consider, and then we can try to put all the information together to find a solution consistent with the problems.

  Thank you.

  RTA

• CommandText compilation error

  In Dreamweaver, I have configured a filter of database with the following command:
  
  CommandText = "< % #" SELECT PGCCalenderALLYears.EventDate, PGCCalenderALLYears.Event, PGCCalenderALLYears.EventTime, PGCCalenderALLYears.Day, PGCCalenderALLYears.Venue FROM PGCCalenderALLYears WHERE (((PGCCalenderALLYears.EventDate) > DateValue (now())) AND ((PGCCalenderALLYears.EventDate) < DateValue (NOW () + 2)) AND (PGCCalenderALLYears.VENUE = "HOME")) ' % > ' "
  
  And the test in Dreamweaver button works fine. However, when I try this in a browser, I get a compilation error:
  Compiler error message: BC32017: comma, ')', or a continuation of expression valid expected.
  
  It seems that he does not like the quotes surrounding the meeting place, that I can understand. Weird that Dreamweaver is OK with that, but it fails in real life!
  
  In any case - is there a way to specify a fixed value in the CommandText?
  

  Try

  CommandText =< %="" #="">
  PGCCalenderALLYears.Event, PGCCalenderALLYears.EventTime,
  PGCCalenderALLYears.Day, PGCCalenderALLYears.Venue FROM PGCCalenderALLYears < br=""> WHERE (((PGCCalenderALLYears.EventDate) > DateValue (now()))) AND < br=""> ((PGCCalenderALLYears.EventDate) < datevalue="" (now="" ()="" +="" 2))="" and=""> < br=""> (PGCCalenderALLYears.VENUE = 'HOME') ' %>))

  --
  Jules
  http://www.Charon.co.UK/charoncart
  Charon Cart 3
  Shopping Cart Extension for Dreamweaver MX/MX 2004

• problem when class from Java Import-compilation error

  Hi all
  I made a java class that has methods to return the height and width of the screen.
  --------------------------------------------------------------------------------------------------
  Tarek package;
  to import java.awt.Dimension;
  import java.awt.Toolkit;
  
  public class screen
  {
  Dimension dim.
  public Screen()
  {
  Dim = Toolkit.getDefaultToolkit () .getScreenSize ();
  }
  public double getWidth()
  {
  Double w = dim.getWidth ();
  Return w;
  }
  public double getHeight()
  {
  Double h = dim.getHeight ();
  return h;
  }
  }
  -------------------------------------------------------------
  I made the 'screen.jar' jar file and make it ready to be used in the form builder
  I opened the form builder and make import java class (program > import java class > choose the class anc click import)
  The class now imported correctly and the PL/SQL package body is:
  -------------------------------------------------------------
  PACKAGE screen / * tarek. Screen * / IS
  
  --
  -DO NOT EDIT THIS FILE - it is machine generated!
  --
  
  
  Constructor for signature (V)
  New FUNCTION RETURN ORA_JAVA. JOBJECT;
  
  -Method: getHeight () D
  FUNCTION getHeight)
  obj ORA_JAVA. JOBJECT RETURN NUMBER);
  
  -Method: getWidth () D
  FUNCTION getWidth)
  obj ORA_JAVA. JOBJECT RETURN NUMBER);
  
  END;
  ---------------------------------------------------------------------
  Now, I did a button on the form and I WRITE THIS CODE TO CALL THE CATEGORY on when_button_pressed
  ----------------------------------
  DECLARE
  vScreen_Class ORA_JAVA. JOBJECT;
  BEGIN
  vScreen_Class: = SCREEN. NEW;
  END;
  ---------------------------------------
  My problem is that I compile error
  error 306 AT LINE 5, COLUMN 25
  a wrong number or types of argument in the call to the 'NEW '.
  
  I don't know what the reason for this compilation error?
  Is this because the method in java return "data type double' in return 'datatype number' oracle
  Help, please
  
  Published by: [email protected] on December 28, 2009 10:24

  The SCREEN is a reserved word (this is a constant), then try renaming your package/pl at JScreen, then it will work.

• Xilinx Compilation error: Formal HDLCompiler:432 &lt; eiosignal &gt; has no real or default value

  Hello

  I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!

  The summary of the situation of the Compilation is:

  LabVIEW FPGA: Compilation failed due to an error of xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formal has no real or default value.
  INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors

  -->

  Total memory use is 189944 kilobytes

  Number of errors: 9 (0 filtered)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused.  It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed.  Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.

  Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.

  Maybe one of these two seemingly unrelated points might help.

  Shane.

• LabVIEW FPGA CLIP node compilation error

  Hello NO,.

  I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

  Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

  I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

  Otherwise that it is attached to the output ELEMENT, a successful compilation...

  

  After that the output indicator comes with CLIP, compilation to fail...

  

  NEITHER sbRIO-9601
  LabVIEW 8.6.0
  LabVIEW FPGA
  Windows XP (32-bit, English)
  No conflicting background process (not Google desktop, etc.).

  Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

  In your case I believe that there is an error in the XML declaration:

  
    1.0
    RandomNumberGenerator
   
      urng_n11213_w36dp_t4_p89.vhd
      fifo2.vhd
   

  This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

  urng_n11213_w36dp_t4_p89

  Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

  oBits: out std_logic_vector (89-1 downto 0)

  These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

  oBits1(31 downto 0)<= srcs(31="" downto="">
  oBits2(31 downto 0)<= srcs(63="" downto="">
  oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

  Both of these changes resulted in a successful compilation.

  Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

• LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

  I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

  "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

  which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

  Any ideas?

  Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

  My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

  I think you should file a bug report using the pages of http://ni.com/support .

  In this way we will have better tools in the future.

  BR,

  / Roger

• Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)

  I solved the problem: the compile error occurred because a single formula node entry was an enum.
  When you insert a cast to digital, the problem has been resolved.

• DMA FIFO of FPGA compilation error

  Hello

  I have a cRIO 9074 with FPGA. I tried a simple piece of code to learn how to acquire the data that is generated on the FPGA at a rate of 10 KHz and transfer it to the host VI to treat later in offline mode. However, I meet this compilation error when you compile the FPGA VI base containing a node to write FIFO (photo of the VI attached below). In compiling the report, it is said that there are 256 RAM Block used (the total number is 40), so an error has occurred. The error notification of exact compilation from Xilinx report is reproduced below:

  # From the PAM program

  # o toplevel_gen_map.ncd - intstyle xflow-calendar toplevel_gen.ngd map

  toplevel_gen. FCP

  #----------------------------------------------#

  "Target part using" 3s2000fg456-4 ".

  Design of mapping in the lut...

  Guided running of packaging...

  Running based on the delay of packaging of LUT...

  ERRORack:2310 - type compositions "RAMB16" too found to adapt to this device.

  ERROR: card: 115 - the design is too large to fit the device.  Please consult the Design summary section to see what resource requirements for your design exceeds the resources available in the device. Note that the number of slices don't notice it that their packaging could not be completed accurately.

  NOTE: A file NCD will be always generated to allow you to examine the mapped design.  This file is intended for evaluation use only and will not be processed successfully by means of BY.

  Mapping performed.

  See the report of map file "toplevel_gen_map.mrp" for more details.

  Problem encountered during the packaging phase.

  Summary of design

  --------------

  Error number: 2

  Number of warnings: 125

  ERROR: Xflow - card program returned the error 2 code. Aborting the workflow execution...

  Bitstream not created

  Time history analysis

  What does that mean? How can I fix this error?

  Thank you

  Bogdan

  Hey,.

  Have you already tried to reduce the size of the FIFO memory?

  Christian

• Outside regs, reg 1239 compiler error

  I installed LV2009 and trying to open the version 8.6 vi.

  I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »

  32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.

  The attached code.

  Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.

• const compilation error

  Hello

  If I declare a const, which is based on a value previously declared const I get a compilation error:

  const int MY_INT_CONST1 = 10;  no error.
  const int MY_INT_CONST2 = MY_INT_CONST1 + 10; compile error: initializer must be constant

  I tried to search the Internet to see if this goes against ANSI-C, but did not find the relevant answer.

  Anyone who knows and who have a source of information?

  Thank you!

  dml72

  Hello

  As I remember, in ansi C, global variables must be initialized by constants.
  So, we can write:
  # define MYVAR 5
  int a = MYVAR;
  because the preprocessor replace MYVAR by 5 before compiling the sources.

  But if we write
  const int a = 1;
  const int b = a;

  We want to initialize b with the value of a, which is a global variable and the compiler should detect an error (declare a constant variable will generate a compiler error if the variable is reassigned to the program, but is still a variableand not a constant).

  The same compilation error should appear if write us in the global section

  int a = 1;

  int b = a;

  int c = myFunc ();

  However in the locals, initialiseur initializer is not necessary to be consistent, so we can write

  void myFunc (void) {}
  const a = 1;
  const b = a;
  c const = myfunction2 ();
  ...
  }

  In summary, the keyword "const" is not the reason for this error, you can add or remove this keyword, the error will always be the same.

  It is simply impossible to initialize a global variable with another variable as global variables are initialized before executing any statement.

  Concerning

  Etienne

• Microsoft JScript compilation error CODE 800A03f7

  The error comes whenever I'm away from the computer.  The error comes in this way, as shown below:

  Windows Script Host
  Script: C:\User\Avinash (it's administrator name)\AppData\Roaming\4e5f\5849.js
  Line: 1
  Char: 21949
  Error: Constant not terminated string
  Code: 800A03F7
  Source: Microsoft JScript compilation error

  The error comes whenever I'm away from the computer.  The error comes in this way, as shown below:

  Windows Script Host
  Script: C:\User\Avinash (it's administrator name)\AppData\Roaming\4e5f\5849.js
  Line: 1
  Char: 21949
  Error: Constant not terminated string
  Code: 800A03F7
  Source: Microsoft JScript compilation error

  on the other

  Go to start > run and type regedit and enter
  Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  On the right, look for Shell which should have value of explorer.exe just just like that... All right of explorer.exe, delete if there is nothing.
  
  (This is the correct way, it should be)
  

  (3) under the same key Winlogon also look for Userinit check if it is as in the picture... it's the way it should be...
  
  (This is the correct way, it should be)