Buttons HP Pavilion DV3 Volume, Mute button and button Wireless does not.

My HP volume buttons not working do not. Reinstall Manager quick launch buttons, but still does not.

Any idea.

Hello

Please perform a hard reset:
1 disconnect all devices and remove all USB devices and multimedia cards.
2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
3 reconnect the power adapter (do not connect the battery), press the power button and check the results.

Tags: Notebooks

Similar Questions

  • HP Pavilion 15-e017tx - button Wireless does not work after bios update

    Hello

    I have the HP Pavilion 15-e017tx for the past 8 months.

    Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

    Now I try to turn off the wireless using this button it will not respond (light orange).

    I checked the Device Manager, there seems to be a problem with the driver.

    IF you have knowledge of this problem please let me know.

    Thank you

    Hello:

    The update of the BIOS should affect the driver wireless button.

    I would recommend that you reinstall as the unknown device is probably the one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

  • G6-2366er Pavilion. My windows8 crashed, and my salesman does not give me disk with OS

    I know that the key is embedded in the bios, but the question is - how can I reinstall my windows? where should I download windows 8 distributive?

    do not restore - mention it does not at all

    Hello:

    You will probably have to order a set of HP recovery disks.

    Call them for the country that you live in the link below.

    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    You can also read this thread and see if the W8 OEM download will work on your laptop.

    See the response of Hüffer.

    http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/need-product-key/m-p/2592907#M96681

    I've done the drive and it works fine but I don't have a PC provided with W8, so I can't test if the key in the BIOS works, but I guess that's.

    Also, I don't know if this download is for any language. It is lacking in English and perhaps it's just that it can be.

  • OfficeJet 6500 and router Wireless does not connect

    I just bought an Officejet 6500 and try to connect to my wireless router.  Whenever I try to connect the printer to wireless it crashes.  The power button does not light, but the screen is lit without text.  At this point, I can't close or get it running again.  I am running Vista Business 64-bit, and the router is a 2wire 1800 HG through AT & T.  It works very well with a usb connection.

    Thanks in advance.  John

    I think you just meet a known issue with some printers of HP network with routers 2WIRE AT & T DSL.

    Have identified us the problem and will deploy an update in the future.  So far, the work around is to assign a static IP address to the printer. Here's a way to do this:

    1. Unplug the phone line from the 2WIRE router
    2. Cut the power to the 2WIRE router, wait 30 seconds, then turn on the power.
    3. Go through the normal process of the printer connected to the 2WIRE (Ethernet or Wi - Fi) device. The printer will not crash as long as the telephone line is disconnected from the 2WIRE device.
    4. The Officejet front panel, go to the menu of 'Advanced Setup' under 'network '.
    5. Select 'Settings of intellectual property', acknowledge receipt of the warning and select "" manual IP ".
    6. Select "IP address" and change the last group of IPS (byte) to something higher or lower. Specifically to your 2WIRE router, select 192.168.0.60.
    7. Press Ok and plug the phone line into the 2WIRE router.
     
  • All-in-one Pavilion 23-Q227C: HP install and download Assistant does not

    Whenever my computer starts up, the HP download and install the wizard tries to run to download a driver Realtek (SP74157) and HP Support Assistant (SP71727).  It fails each time, with a pop up that says "installation HP and download Assistant works do not" and the only option is to "close the program".  Don't know if these downloads are important, but their failure every time is, at the very least, a nuisance.

    Solutions?

    @ericbro

    I'm not aware of a program that runs on the HP of other consumer computers that the HPSA who would try to install an update for your driver Audio HP's.

    • If you remove the HP Support Assistant to programs and features,
    • If you stop and restart the computer from a STOP condition (not restart),
    • who should squelch (stop) the HPSA and no subsequent download / install primed by the HPSA

    If the process is repeated even after the removal of the program and by completing a cold (boot off) start, then installation must be controlled with other than the HP Support Assistant (as you say).

    The Task Manager will appoint the HPSA program when that program (HP Support Assistant) is open (click program and run).

    The Task Manager > Details will appoint the program (HPSA) as "HPSF.exe' (executable for the HPSA).

    If the HPSA is the process that is continually download and try to install the driver, you might have to search in the list of processes (Task Manager > Performance > resource monitor) and see if you can find the rogue program.

    I think that if the driver is to download somewhere on the network, you would see a relative link / address in the resource monitor.

    I may have missed something, of course...

    If I think of anything else, I'll post.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • Pavilion dm4 2070us: after reloading Windows 7, Wireless does not work

    I reloaded the OS. I downloaded the drivers for all components but could not identify the driver for the wireless.

    Hello

    Wireless Intel, Intel PROSet and Intel my WiFi for Windows 7 drivers

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52600.exe

  • Windows 7 installed and now Wireless does not work

    Help, please

    We need the model number of your laptop and the name of the wireless adapter if it is known to help find the right driver.

  • Installed the updates, but the display looks like windows 98 and the Wireless does not work

    Hello
    I use a laptop with vista service pack 2 and I tried to update windows via windows update on the recommendation of the support page from microsoft on how to unload a debugger. There are only three optional updates available, I forgot what they are and after restarting the computer the theme looked like windows 98 and my without wire might work, and also, I was still having problems with the game with the question of the debugger.

    What should I do?

    (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves. The 'remains' of McAfee may be cause of your problem.

    1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 test cycle.

    NB: If the application pre-installed McAfee subscription or free trial period has expired before you install Threatfire, the latter may not have installed correctly and can not work correctly since you installed it.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I have a new laptop and the Wireless does not work as it should.

    You can have a new laptop with Windows 8 and are having some problems with wireless, but no other system with Windows 7 or more, there is a problem.

    At first glance, this seems to indicate something wrong with the all-new Windows laptop, 8.

    Before making a lot of changes and going through troubleshooting, make sure that the firmware of the router is up-to-date.

    Similar problems occurred when Windows Vista and 7 have been released and most of the large router manufacturer had a firmware update this rememedied a lot of questions.

    Just something to keep in mind is updated updated the firmware of the router because it is not clear that he could be at fault.

    I hope this information helps.

  • HP Envy 4-1026tu Volume Mute button LED does not

    Hello

    For some time now my LED Volume Mute of the [f11] key was not lit. It mutes and restores the sound volume that she doesnot glow. Earlier he used to shine on the Mute [RED] and activate the microphone.

    Product: HP Envy 4-1026tu

    OS: Windows 7 64-bit

    Thank you

    Nishant

    Nishant_Ladiwal,

    I would will direct you to your device manager and check on your current audio drivers.

    1. open the Device Manager, if you do not know how to click on this link

    2. open the sound, video and game controllers

    3. right click on IDT High-Definition

    4 left-click on properties

    5. click on the tab at the top driver

    See what is the current driver if the driver is older that this pilotplease update this driver.

    Also install this HP Quicklaunch softwareas well.

    Please answer as soon as possible.

    Thank you

  • HP Pavilion 11 360: button / stop does not

    I close the laptop and then when I want to open it again the power button works and the system seems to be booting the system. However, when the HP sign disappears the screen becomes black although I can still hear the fan operation. It does not have the beginning, until I press the power button twice. Once to get the start screen flashes and then after the second time the system fills his departure upward and I see the logo of password.

    The boot process will not end until I have go through this rigmarole and rest on a black screen with the fan working away in the background, no matter how long I leave it.

    Anyone know what could be the problem?

    Hi @geom1,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion 11 x 360 Notebook and problems with the power button works correctly. and the brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button.
    Figure: 13 choose what the power buttons.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8.  Please restart the laptop twice to make sure that all updates are completed!

    Please let me know how it goes.

    You can say thanks for trying to help, by clicking on the Thumbs Up below! .

    Thank you.

  • How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

    How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

    Like I can't pin, I keep it at the top of the page with scroll effect 0.

    It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

    Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

  • Option button and associated features does not work!

    Hi Pros,

    I am facing the following problem:

    1.I have an interactive PDF created in Acrobat 9 Pro.

    2 have a few option boxes, each radio buttons be assigned been worth (for example: 1,2,3 etc.)

    3.I have a text box in which the value of the selected option button is displayed.

    4 PDF works fine on my machine.

    5. customer is to have Internet Explorer version 7.0.5 and Adobe reader: 8.2.6

    6. the option boxes and associated features does not work on the client computer.

    7. the text box displays "0" even if we have a radio button with a value of 2 or 1 is selected.

    What is the problem? How can I solve this problem?

    Help, please.

    If you have disabled JavaScript or automatic calculations in Reader preferences, you will get this type of behavior. You can test yourself by changing your preferences (Edit > preferences > JavaScript, Edit > preferences > forms > automatically calculate field values). All calculated fields depend on JavaScript behind the scenes.

  • button / (divide), does not

    button / (divide), does not work in the formula (instead of printing +), what to do?

    Look VERY carefully at what you see as + the divide symbol appears as a Chief and a threshold which, for some people, looks like a +. If you don't see the symbol try enter the formula and see if it DOES not give you the correct result.

  • Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

    (143868)

Maybe you are looking for