Buzz of noise in the tempo switch

My song has 4 different tempos. Every time that happens, occurs a humming noise. If I get all tracks FX behind it disappears. How can I keep the delay, but not the buzz?

Thank you y´all.

Use automation for on/off switch of the delays to and after each change of tempo.

If that kills too late in the face of that time, and then introduce a Gain ahead of every delay, automate the Gain to cut admission to the delay when changing the tempo. Who will cut the whole track, however.

Tags: Professional Applications

Similar Questions

  • iMac buzzing when connected to the external amplifier

    I have external amplifier connected to the new iMac 5K retina. When he plays music or sounds of any kind, through speakers, it's all good.

    However, if you do not play any sound for 20 seconds, it is very light buzzing sound from left speaker only. I logged out (model end 2012) iMac and it works exactly the same.

    This is NOT ground loop or bad cable/amp problem (amp and iMac share same multi socket). It seems that something in the iMac will sleep, open the circuit, making the high output impedance, making the left channel pick up noise from the power grid. HiFi, impedance of the output device installation is low, effectively killing most of the HF/RF interference in the cable.

    It is very annoying problem that I scoured my decent sound, high-end amp/speakers. Any ideas or solutions (Apple I hope you read this too, it's unacceptable on 2000USD + machine).

    Apple is not reading this. This is a user forum. Certainly, this looks like a bad cable from your description.

  • You can change the tempo without affecting/stretch automatically audio?

    My workflow...

    import an instrumental, then add a tempo meter to detect the tempo... can change the tempo of the project... but OOPS, that extends the audio file... How can I change the tempo without changing the audio file? Thank you!

    Region selected: in the region Inspector, uncheck 'follow Tempo and Pitch '.

    This will separate your audio region of tempo changes.

  • How to speed up the tempo of the song, as in this way...

    How to speed up a 8-16 bar snare roll for example from 128 to 140-170 or something like kind of how they did in this second generation in this track - https://soundcloud.com/smashthehouse/coone-x-bassjackers-x-gldy-lx-sound-barrier

    Open world tracks. Show tempo - change the tempo by insertion of nodes where you want and setting tempo line

  • Is it possible to get the option "Switch to tab" higher when you type in the awesome bar?

    Hello

    I am currently under the latest version of Aurora and although I really like it, there is one thing that has bothered me kind of. I am often under more than 100 tablets at once and all of them to find the desired search tab takes a long time, so I would like to use the function "Switch to tab", but more often than not, this option is very far down the list of suggestions, causing me to miss them. So I would like to know if it is possible for this option as one of the first suggestions, instead of putting down in the list.

    Thanks in advance,

    xMyth

    Hello xMyth, I don't know if that's exactly what you're looking for, however when you start your search in the address bar with % it will be limited to open compressed only...

  • How to change the tempo in drummer without changing the tempo of audio?

    I recorded audio to 100 bpm and uses electronic drums.  There are sections of the song who need (x 2) or double speed for drums electronic drums have no function (2 x) as rock drummers do and I like to keep my audio recorded tempo.

    on audio tracks - uncheck the tempo to follow in the Inspector. This will cause tempo changes that will not be included is not on the slopes.

  • How to ENTER ON the new tab page? Can't seem to make this work. The toggle switch is missing.

    The switch to the new tab page is not there in the upper right. Where is he?

    If browser.newtab.url has been "grayed out" subject: config it's probably because it's already the default value, which is of about: newtab... so you don't need to reset. Since you have to reset the preference browser.newtabpage.enabled (to true, by default) then the "toggle switch" should appear, as shown here:

    If browser.newtabpage.enabled is now fixed to true and that you still don't see the "switch", you can try Search reset the module that will restore the parameter browser.newtab.url (as well as other preferences related to research and the homepage) to the default value.

  • How to prevent activation of the application switcher function the central button of the mouse

    I use a mouse third with a scroll wheel (button 3) as the central button of the mouse.  How can I prevent this activation of the application switcher function button?

    System Preferences > mouse allows you to assign actions to the buttons on the mouse. Some mice come with their own drivers/preferences.

  • Satellite Pro M70-275 - where is the lid switch?

    Hei,

    I have problem with backlight in my laptop (Toshiba Satellite Pro M70-275). I think that the problem will be solved completely if I find where is the button of the cover.

    I hope someone can help and guide me to the location of the switch.

    THX

    Hello

    Are you sure that the problem is the lid switch? Normally if the backlight doesn t work on the screen inverter FL needs to be replaced.
    What happens if you connect an external monitor to the laptop? You see an image?

    The FL switch is normally placed under the cover of the display. It s a little trickier to Exchange because it is necessary to remove the plastic cover of the screen.
    Maybe you should ask a technician for laptop to help.

  • Tecra S11 - bluescreen when the WiFi switch is on

    I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.

    Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
    Thanks, Guido

    Hey Buddy,

    Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps

    But I had a similar problem last year and the solution was exchanging the WLAN card.

    I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)

  • Tecra S1: Notebook generates noise when the LCD display is on

    Tecra S1 is 4 years old and generates a high noise when the LCD is turned on (from last week). The noise comes most of the keyboard. Could this be a defunct ups?

    Is there an easy way to fix it? It's not very loud, but in a quiet that is audible.

    Hmmm I think this noise comes certainly from the FL inverter.
    But I can't tell if the inverter is faulty or not because I noticed that her top on different laptops when the brightness of the display is placed on the lower floor.

    But if you think that this problem was not present in the past, then you need to contact a technician who could help you replace the inverter FL.

    Best regards

  • Re: How to get the Tempo to work properly?

    Hello

    I have problems with the service of Tempo.

    I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

    When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

    I tried to reinstall the application, but no change in the situation.

    Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

    Any ideas on how to get the Tempo to work properly?

    Thank you.

    I saw in your other thread you have installed SP1 on your Vista laptop.
    There may be some compatibility problems between SP1 and Tempo

    And Yes, as far as I know Tempo bring all available updates!

  • I lost my iPhone 5 and the "Cell" switch is off. How can I turn on it from another phone?

    I lost my iPhone 5 and the "Cell" switch is off. How can I turn back on from another phone so I can activate "Find my phone"?

    You can not. There is no method to remote turn on/off all the settings on the phone. The only thing you can do is put it in mode lost through the computer and it remains to be seen if the device connects to a known Wi - Fi network. Otherwise, you'll just go out and pick up the old-fashioned way. You have it in Mode plane, or you just disable cellular data?

  • Re: Equium L40 - Windows 7 and the wireless switch

    I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

    Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

    When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

    I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

    Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

    See you soon,.

    Ray D

    > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
    What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

  • No noise in the right of the eMac G4/1.42 Ghz channel

    The sound is off in the channel on the right of my eMac G4/1.42 Ghz model. Is it easy to fix? What would be the likely culprits? This could be a short circuit in the enclosure itself or a sound card is shown?

    Also, I run a few synths on this computer using a firewire (MOTU 828) interface. The sound would still be there it out via the firewire port? What is a good way to test for the specific problem?

    I'd also appreciate a link to the manual for repair for this model, if it exists.

    Thanks a lot for your help!

    Tom

    This is a web resource:

    http://www.PowerBookMedic.com/manual.php?ID=60

    No more, I am wary of sites saying they can provide free textbooks because too many of are based in a part of the world-renowned for websites are not what they seem.

    For what is a source of tone, I would use the sound system preference because it is a source of tone based on the system and you can play with the left/right balance. This eliminates a cable intake entry or jack as a contributor to the problem.

    eMacs aren't easy to take down due to the proximity of the video components high voltage. With the A1002 there is also a high risk to destroy the power switch during reassembly, if not done with extreme care.

Maybe you are looking for

  • Standby/Hibernation do not work on my Qosmio F10

    I recently had to reformat my Qosmio F10 using diskettes of origin provided with it. Now, when I put it in sleep mode, the screen turns white and it just hangs. The only way out is to hold the power button until it stops, then restart. With the Hiber

  • HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

    Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

  • Toshiba laptop computer recognizes the CD store bought more!

    -still will read and play DVDs and CDs that I transferred material (songs and data backup) to previously.  Also, read product DVD professionally. Tested CD on other CD players - no problem. When I insert the CD in the Toshiba drive - it starts to spi

  • Scan and fax windows windows home 7

    When you try to send a fax with scanned documents, I get the message cannot send - data disabled!   I have seen this same doted error and have yet to see a response from support technique microsoft.  Is there a solution or this problem enters the "BI

  • The grid view does not fit

    First things first: I use latest LR5 on Windows 7 inside a container Parallels 10 on a MbpR 15 "(Yes, I've migrated to a mac recently and am still stuck with a windows license).Some features of LR base recently stopped working.  The most annoying is