Buzzing noise when I turn the phone off

Similar Questions

• everyone sees the spinng wheel when they turn their phone off I'm not on my own

  iPhone screen 6 had repaired. When you switch the phone off normally see you a spinning wheel before he died, but on mine I have not extinguished. This could be due to a new update or be fixed

  Hello

  Don't worry about this. It is not necessary to see the small wheel before the iPhone turns off completely.

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• 6 s needs to lock the power button I have large hands and when I turn the phone I keeps off the phone please find a way to fix this thanks.

  IPHONE is 6 s gray space 16 GB,

  design flaw with the power switch on the side there have a problem when you rotate the phone, it is easy to turn off

  you don't even want to. also, it is the area I want when I turn my phone on the side I think electronics disable?

  Then tell Apple:

  www.Apple.com/Feedback

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• When I turning the printer off and then on power, he immediately tries to print a test page.

  HP Photosmart C3180 all-in-one
  Windows XP 32 bit
  no error message
  unaware of any change in system - color cartridge is empty, black is not

  The page is printing is an alignment page.  This will be printed after a cartridge is changed and can continue to print if the alignment is not successful.

  See here for more information.  Alignment requires the black part and cyan cartridge color to print correctly to alignment complete.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• Is there a need or a way to turn the pencil off the power when you do not use?

  Is there a need or a way to turn the pencil off the power when you do not use?

  Unfortunately not. The best thing is to turn off bluetooth. However, you will need to re - pair the iPad and the pencil again by plugging in the port of lightning. When not used the pencil of apple do not lose a lot of power.

• Reagent with breakpoint. When I turn my phone and read in the longitudinal direction, the phone opens the next breakpoint, not nice with a youtube link and the solution?

  I want to force the design to stay in the same breakpoint, when I turn the meaning of reading on a phone. Someone at - he found a solution to this? A youtube video does not read it ok...

  And when I come back, it does not display...

  Thanks Jacob

  Se this example page on a phone, kuhu doing video work with breakpoints, you can block a breakpoint I?

  Everyone, how to solve this problem?

  http://www.thesander.dk/responsive5/

• iMac by making a noise when I turn it on.  What's wrong?

  What can I do to stop the noise when I turn on my iMac?

  Turn down the volume. If this does not work for you, reset the NVRAM according to the following: How to reset the NVRAM on your Mac - Apple Support

• I can't turn the phone on its side to see an overview

  When I turn my phone on its side, the image remains in the vertical format. How can I reset phone so that the images change when the phone is in the horizontal position?

  Use access control and turn it to portrait orientation lock. It will be the icon with the lock and the arc around him.

• Why my pictures and my videos are no longer turning them when I turn my phone on its side?

  All of a sudden, my pictures and my videos do not rotate when I turn my phone on its side.  I can't understand what setting may prevent this.  Can someone help me?

  You must release the rotation lock in the Panel. If you are still using IOS 6.1.4 you must update your software to 9.3

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• Power Button lockout allows me to turn the monitor off.

  A button on the front of my HP 2310e monitor allows me to turn the monitor off.  When I try to do a "Power Button locked" message.  How to fix this?

  Glad to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen