By mistake I have remove the audio drivers of my HP laptop

Similar Questions

• After reloading xp professional I have no audio or the audio drivers... Help

  After reloading xp professional I have no audio or the audio drivers... Help

  Visit the web page of manufacturer (on your computer) and find the section of support download & drivers of their page for your computer model and install the necessary drivers.  Those who understand the chipset (card mother motherboard chipset) and device video, audio, or network devices and so on.

  Any material support - including the software drivers that allow him to express prperly with any operating system - is the manufacturer of the equipment.

• I have uninstall the audio Manager DD realtek by mistake, how do I reinstall it?

  I have uninstall the audio Manager DD realtek by mistake, how do I reinstall it? (dell inspiron 15 windows8) Please give me a solution

  I can't hear any sound from my

  R15 Dell Inspiron with windows 8

  Please help me

• Prime Minister 9. I made a mistake when I did drag an audio file in the line of the image. How to remove the audio file. I tried ctrl z and shift delete nothing done.

  Using Adobe Elements 9 first, I made a mistake when I did drag an audio file in the line of the image.

  How can I delete this audio file? I tried ctrl z and shift delete. software has the ' delete the scene and all of the properties in gray. Just "delete scene only" it and it does nothing to remove the audio file.  I had to drag the line from the soundtrack.

  Who can help me?

  LinFos04

  What you wrote, it seems that you are in the scene of Premiere Elements 9.0/9.0.1 workspace.

  Please see screenshot showing you how to remove the audio immediately after you dragged in the film that had been marked "Drag the next clip here"

  

  Moving forward consider working in the workspace of timeline that gives you a better view of what is happening and therefore gives you more control over the flow of work. Please click chronology to watch how this audio present in the workspace of chronology after what you did in the space of the stage line.

  Please let us know if it worked to get rid of the audio unwanted in the Premiere Elements 9.0/9.0.1 workspace sceneline.

  For any question or need more information on the above, please ask.

  Thank you.

  RTA

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

  Hello...

  Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

  The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

  ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
  Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

  First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

  Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

  Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

  Windows tells me that it was impossible to find a driver in the any of the archives...

  The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

  Any help would be greatly appreciated,
  Tasos

  P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

  P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

  This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

  Hello

  Regarding the sound issue.
  A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  You will need to install KB888111 and KB835221 hotfix

  With regard to the BIOS;
  Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

  Good bye

• Satellite 2400-S251: impossible to install the audio drivers XP

  I have a Satellite 2400-S251 and I just upgraded to Windows XP and now I have no sound.
  I looked in my device manager and I have drivers but I see 4 different audio codecs.

  I downloaded the audio drivers from the Web of Toshiba (s240sndx.exe) site is accurate. and it starts the installation but just at the point where you think that its almost done just it stops and says "driver not installed".

  Does anyone have a solution for me?
  Is it possible to manually place the INFs of the (s240sndx.exe) that I extracted from my C drive somewhere. If Yes, then where?
  Any help will be greatly appreciated.

  Hello

  What page of the driver Toshiba did you use? Have you downloaded the driver from the EU page or US?
  Satellite 2400-S251 deigned for the American market.
  Maybe the audio driver from the Toshiba website we will help you recover the sound

  See this page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  and you choose the unit.

  After installing the audio driver, you should also check all audio controls in the-> sound and audio devices Control Panel
  They should be set at a higher level

• Performance issues because I don't have any volume in my system after you have removed the infected files

  I have a few files that were infected so I deleted them. Now, I don't have any what volume in my system please help or direct me to a program that I have to reinstall thanks in advance!

  You will need to tell us more about your system and exactly what "I have no volume on my system" means.

  Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.

  Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  Please answer the following questions, the better you can:

  What is your system brand and model?

  If you have a Dell computer, what is the Service tag?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, avast! Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If you get an error message, what he said (exactly)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  Do you mean that your system does not any sound at all or do you mean that no longer see the volume control icon in the Notification area (to the left of the clock in the taskbar system)?

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  If you look in Control Panel under sounds and Audio devices and uncheck/check the volume icon to Place in the taskbar and click on apply, you see a message like this:

  

  What do you see iif you click on start, run and in the type box:

  c:\windows\system32\sndvol32.exe

• Help, please! Remove the audio only pre-existing to make the new voice overs.

  Greetings,

  I made a video which is an advertisement for a company. How to add subtitles, I want remove the audio from the middle of the video and then create new voice on audio. I looked through the forum and did not find any discussion on eliminating only part of an audio segment and the creation of new audio to replace what you deleted. Please let me know if you have any advice or tips. I'm serious need assistance. Thanks in advance!

  Thank you

  Reid

  Someone I messaged on another forum and provided the shortcut "command + K. Seems to work so far. Thanks for any help.

• where can I get the audio drivers for IBM model 8434PA4

  Original title : my audio driver where can I get the audio drivers for IBM model 8434PA4

  Hello

  need to answer,
  where can I get the audio drivers for IBM model 8434PA4?

  Hello

  What operating system is installed on the computer?

  I suggest you to check out the link next to the Web IBM site to download the audio drivers.

  http://www-947.IBM.com/support/entry/portal/downloads

  Choose the appropriate model before download the drivers. You can also contact IBM support for assistance.

• I can't connect you on some client computers on a domain environment unless I have remove the network cable.

  I have almost five machines on my LAN that cannot log on to the domain, unless I have remove the network cable and then it connects.
  Please advise?

  On the domain controller or problems by communicating with the domain controller, when you remove the network cable, you connect with that caching of credentials.  Also look at the DNS settings on the RODC, the RODC DNS should point to itself, make sure that the machines are all on the same subnet.

  John

• How can I reinstall the audio drivers for my motherboard d845egb2 intel

  I received a 2nd hand computer and had to wipe all of its information. and lost the ethernet drivers and audio. So how can I reinstall the audio drivers for my motherboard d845egb2 intel

  Hi samshepherd,

  To check if an updated audio driver is available for your sound card, you can use Microsoft Update to help you determine your current sound driver and if an update is available.

  You can also contact the sound driver hardware or the computer manufacturer for an updated audio driver.

  See the link below for more details:

  How to update a sound card driver in Windows Vista and Windows XP

  Additional reference on:

  How to troubleshoot sound problems in Windows XP

• How to fix a conflict driver VIA? Via the Audio drivers and OHCI IEEE 1394 Host controller?

  Because this motherboard (ASUS P5Q SE2), uses VIA VT1708S 8 - channel High-Definition Audio CODEC.

  And my PCI Firewire card is also VIA - according to Device Manager. It is running Vista. If I connect my DV cam (which has a mini-port FW on it), then turn it on, the entrance FW in Device Manager says there is a problem. But if I disconnect the cam, then restart, the FW entrance goes back to normal. I've seen this prob before, where someone else had the same prob (but firewire was aboard).

  I tried updating the FW driver through the Device Manager, but there isn't a newer driver available. I know that the FW card is fine. It was in my mobo previously (P5Q SE/R), which uses the Realtek ALC 1200, 8 - channel high definition Audio CODE, without going through. So, any ideas on how to resolve this conflict?

  Looks like I found the prob / cause. ASUS drivers Via for the sound. The latest version from the ASUS site

  I uninstalled them so I use the audio drivers by default Vista. The sound and the FW work. I plugged the cam DV again, made windows sound and it connected right away. Must be something in the audio drivers causing the conflict (such as an address / IRQ entry or something in the inf file).

• How can I do to make the taskbar allows you to hide every time I have remove the slider from?

  2 questions: How can I do to make the taskbar allows you to hide every time I have remove the slider from?  This rarely works.  Question 2: name of the task SystemSoundsService is called by the Microsoft PlaySoundService class action.  What is his function, and above all, what is the best place for these tasks apparently running in the background all the time?  Is it good to put an end to this task?

  Hello

  Check the scheduled task SystemSoundsService here.

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/kb/939039/en-us

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.