By Satellite Pro S300 uses double layer DVD burner

Hello

Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
THX

Hello

Do you have your read the user manual?
In manual mode, you will find information on the CD/DVD drives properties;

Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

Tags: Toshiba

Similar Questions

  • Double layer DVD burning does not

    The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

    any thoughts?

    Thank you.

    Message edited by voiron on 2008-05-15 10:45

  • Satellite Pro 6000 and SD-R6472 DVD burner

    In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

    Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
    After that, everything works fine.

    Hello

    Thanks for the useful information.
    I'm sure that this information will help other users who have similar problems.

    Good bye

  • Pavilion 15-p245sa: in HP Pavilion 15-p245sa double-layer DVD burner?

    Can someone tell me if the 15-p245sa Pavilion has a DVD writer dual layer? I'm trying to find out a friend who needs to make a buying decision this week, quick response would be much appreciated!

    Thank you

    Hello

    Yes he has.

    Kind regards.

  • Satellite Pro U200 - does support the DVD double layer?

    Hello

    Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

    Kind regards
    CCBC

    Hello

    It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

    To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

  • Satellite Pro S300 - HDD in caddy is not recognized by BIOS

    I replaced the original HARD drive and installed a new SSD that works very well.
    Installed the W7Pro and all updates.

    I do not use my burner so I replaced the CD drive and installed a shopping cart with my old HDD to have more disk space.

    When I start my laptop, I see a message of ERROR of CD-ROM.
    In Device Manager the caddy and or the HARD drive is not displayed.

    I tried to change settings in the BIOS (according to Toshiba utility the latest version), but even in the Bios is no information about this SSD or HARD drive installed. (or the CD player when I re - install this drive again)

    What's not here? Do I need a BIOS updated allowing the 2nd HARD drive?
    Or if I forget a setting somewhere?

    NB in the BIOS HARD drive drive settingis according to ACPI, the list below it is referred to as IDE device.
    When I enter the BIOS IDE instead of ACPI, I still see the CD-ROM ERROR when starting and after this message, the screen is blue and no other activity.

    Relevant information from PC:
    Model name Satellite Pro S300
    Part number PSSB0E-02H00FDU
    Serial number: 88091121
    Version of the OS Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
    Version of the BIOS Version 3.00
    Processor Intel (r) Core (TM) 2 Duo T5670 CPU 1.80 GHz
    Physical memory 4096 MB RAM
    Disk capacity hard 255,953,203,200 [bytes] 238.375 [GB]
    Capacity of the hard drive space free 200,118,833,152 [bytes] 186.375 [GB]

    IDE Device V4-CT256V4SSD2
    TEAC DV-W28S-RT FW version = 7.0 D

    > What is the problem here? Do I need a BIOS updated allowing the 2nd HARD drive?
    > Or if I forget a setting somewhere?

    To my knowledge, not all laptops support a 2nd HDD rather than the ODD (optical disc)

    Also, not all CD/DVD drives are compatible and could be used for all laptops.

    So agree with the user above and I think it's the problem of compatibility also.

  • Satellite Pro S300 - Performance issues running Everquest 2

    Hello, I am currently using the Satellite Pro S300-EZ1511.

    I was trying to find a way to share the memory in the BIOS, but I've been reading around and it seems that you can not do this with these laptops... My question is, what I currently play the game Everquest 2, and I was talking to someone of performance that I currently have to run the game on the lowest setting, and we exchanged Plug and it turned out that his laptop was actually not as good as mine, but he managed to run the game with a better graphic quality.
    Anyone who is familiar with this game, or you have any advice on how to increase the video if possible memory or to simply improve performance?

    I think I should at least be able to run a top quality graphics game layer is... I was looking in the graphic propertiese (when you right-click on the desktop) and under setting 3d but alas I'm not sure what those setting are.
    Any help would be appreicated.

    I find it strange that my laptop older can run this top quaility set then this laptop from new and better.

    > I think it was 1 G of ram and 64 MB or 128 MB ATI onboard card video (I think it was the 128)
    I think that this is the reason why the game runs better on your old laptop because it of a ATI card and these cards are designed for games. There are a lot more nVidia and ATI cards, they are much better than the most recent card Intel graphics.
    As resident said Intel cards are not designed for games.

    Also did you check the system requirements for the game? He argues that Intel graphics card in your laptop?

    The graphics settings are ok. S default settings and for better compatibility and performance. It do not change anything.
    If you read on the internet that other people changed some settings why ask n t they? These people he'll know what to change, but I doubt that this can help you but it s worth a try! ;)

  • Satellite Pro S300 - 11 H: charging not not after re-installation of software

    My laptop has been "reset" by a Virus called AdwCleaner last week removal tool (CAUTION - do NOT run it on your laptop - if could ruin your life!)  :(

    In any case, the result of it was that I had to take it to a repair shop where they were unable to restore Windows XP I had used since I got the machine, and so they have had to re - install the original Windows Vista which was the OS when I bought it. (I bought a "downgrade" to XP disc with the laptop)

    Until that happened, the charging of the battery and everything worked well, but since I'll be back my laptop from the store, battery does not charge.

    When I hover over the right low battery icon, it says "3% available, battery not charging".
    The battery is OK, because if I unplug the power cable, the laptop stays on.

    Is there some setting somewhere that is revealing the machine do not recharge the battery?
    How can I get it back to normal?

    See you soon,.
    Select this option.

    Complete model: Satellite Pro S300 - 11H

    Post edited by: KasinoKing - typo in the title!

    Guess what?
    I m wondering if the guy installed all the drivers of Toshiba Vista that are released on the Toshiba UE driver page.
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

    I m thinking in particular software and tools such as value added package

    I also recommend you to check the Device Manager.
    In Device Manager, expand battery area.
    Here, you must first uninstall the
    -Battery method to check compatible ACPI Microsoft
    -Microsoft AC adapter
    -Battery composite Microsoft

    Reboot the laptop.
    Check how to work the battery charging process
    In the case where they would find the new hardware (these would be three uninstalled devices from Device Manager) wait until the system has installed the driver, reboot once again and check the load

  • Satellite Pro S300 - 117 PSSB0E Bios Recovery disk?

    Hi I have a Satellite Pro S300-117 PSSB0E-04J00UEN, and it seems that the BIOS was damaged when turned on the power lite 2 flashes green and 2 orange

    I'm looking to be able to rewrite the BIOS using a usb floppy drive or usb key that emulates a floppy drive.

    The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

    I believe also that the press/hold button when you turn on the power is the one above the tab key but also saw other keys such as F, F, F12 FN and ~. If all the instructions would also be appreciated.

    Kind regards

    Chris G

    > The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

    I could find a BIOS for this series on the Toshiba driver page we
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2496404&PF=true

    Zipped package contains the based victory and based back the version of the BIOS.
    Unpack this package and read the readme.txt file

    There you can find the details of the update of the BIOS using the diskette

  • Fully operational GPS on Satellite Pro S300 with F3507g card

    Hello

    Some good news. I have the GPS works entirely on the Toshiba Satellite Pro S300 with F3507g 3 G card. I think that the measures to make operational work on any Toshiba laptop with the same card.

    It requires new 3G Toshiba drivers for the card that exposes the COM7 GPS port, some trick with the COM port for the card out of the location data (this would have been done by a Toshiba application if they support the GPS), then it will work with any application that supports GPS.

    I used the land bridge to verify this works and this allows tracking on Google Earth, see [image here | http://img405.imageshack.us/img405/2262/earthbridgepd2.png] (note that I blanked my exact location because it locates my front door). This signal was achieved with the laptop near a window.

    What I plan to do is to make a small application to enable or disable the GPS receiver and will post some instructions on how to address all this, which is quite easy other cunning of Com port that I hope, I can make do with a small, free program.

    Concerning

    Phil

    Post edited by: Philip_l

    Hello Philip

    Thanks a lot for this thread. This is really interesting stuff and it will be interesting to have a little more and more to report about it. If you have time please do it for this wonderful community.

    I just hope that the moderator will pay attention to this subject and maybe offer you more space or even separate category for people like you.
    It will be great to have some sort of blogging here.

    In any case, respect for your work and I hope to learn more about these interesting topics.

    Good luck!

  • Satellite Pro S300-ez2502 - sometimes touchpad stops resonding

    Hello

    I use Toshiba Satellite Pro S300-ez2502 with Windows Vista Business.
    Sometimes my touchpad doesn't work for a couple of seconds at least 1 time a day.
    It becomes a bit annoying, because the mouse pointer move by moving the finger on the touchpad.
    Can someone please suggest a solution? Hoping to hear from you soon.

    Thank you
    Adil

    Hello Adil

    Apply for solution is simply but it will be interesting to know when that will happen. Usually, if the mouse is frozen it can be because of a background activity or HARD drive busy.
    Have you noticed the HDD activity (HARD drive flashes) when this happen?

    I mean when you wrote sometimes that's not easy to say why this happens and what you can do about it.

  • Satellite Pro S300-10J - Question about the power of the microphone

    Hello!

    I would use my S300-10J for acoustic measurements on the speakers. (DIY)

    For this configuration, I am using a microphone electret, the IBF EMM-08:
    http://www.etfacoustic.com/micpreamp.html

    for power, it's what suits him: 1.5 - 10 v / approx. 0.5 my

    The s300-10J who provides or not?

    Anyone who can recoomend a card external sound that has this provision? (if my laptop does not work)

    Thanks in advance,
    Bart Segers

    Hello

    I can't give you details on the microphone of the satellite Pro S300 tension because I didn t find all the details about the tension of mic jack, but I guess that it s a voltage standard as on others, laptops different.

    As far as I know the external portable media microphone who need 1, 5V DC.
    So I guess that the S300 this support too.

    That's all I can say about it.

    Welcome them

  • Satellite Pro S300 - cannot extend the desktop to an external monitor

    Hello
    I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

    so far I have tried:
    2 instructors and 1 projector all do the same thing, will clone but not extend.
    Reinstall the latest drivers to display on the Toshiba site.
    Reinstall the latest drivers of change on the Toshiba site.

    But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

    Has anyone seen this before and how solve you the problem?

    Paul

    Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

    More I would try updating the BIOS. You can find it on the Toshiba site too.

    I hope it works for you.

  • Satellite Pro S300 - 11G: headphones Pluging will not completely cutting speakers

    With high volume settings and with the headphones plugged-in, a very distorted sound leaking through the speakers.
    Have tried using several different headphones.

    The machine is that the satellite Pro S300 - 11G retrograde to XP and less than a month.
    Toshiba service are threatening to charge if the problem turns out to be the software, not hardware. (even if they provided the software!).

    Popular ideas

    You have the volume of the Microphone high value?

    Maybe he just returned from Mic. Try to cut the Microphone, or turn down the volume to about 10%.

  • Satellite Pro S300-10j and recovery disk

    Toshiba Satellite Pro S300-10j recovery disk

    OS: Vista Business

    Please can someone give me a link.
    Very much appreciated.

    Thank you

    Drivers for the supported operating systems you can find on the download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

    This recovery is not understandable to me.
    What do you want exactly?

    Is that each new Toshiba notebook comes with the image of HARD drive recovery and recovery disk must be created using the preinstalled Toshiba Recovery Disk Creator.

Maybe you are looking for

  • Problem with sound card

    The error message at the opening of the music played is coming as Windows Media Player cannot play the file because there is a problem with the audio device. There may be a sound device installed on your computer, it can be used by a program or it is

  • SearchFilterHost.exe Application error

    Since to play with Windows 7 install on another partition, Windows XP is randomly popping up a red-X error message says: SearchFilterHost.exe - Application errorThe instruction at "0x0435622a" referenced memory at "0 x 00000014.  The memory could not

  • Windows 7 ultimate 64-bit (OEM version) 0xc004f050 error code.

    I have a machine running Vista ultimate 32 bit and decided to add it to windows 7 ultimate 64-bit (OEM) using a new hard drive with the operating system so that I can dual boot drive (or OS). I did this so that I could benefit from 8 GB of installed

  • Deploy Application MAF on Win7 Jdev approx. iOS device

    HelloAs MAF is a hybrid of Mobile development platform.I'm looking to deploy an application of MAF to and jDeveloper Windows 7 on an iOS device environment?Is it possible or I need an iOS for this machine?If possible how?

  • VSphere CLI on Debian installation

    I try to install on Debian VMware-vSphere-SDK-for-Perl-4.0.0-161974.x86_64 7 64-bit.  Installation went without error.  But when I try to use it (vmware-cmd), I get the error "/ usr/bin/perl: symbol lookup error: /usr/lib/perl/5.14/auto/XML/LibXML/Co