By using the system restore before computer restart after updating Windows 10...

Similar Questions

• Error: "the system restore is disabled by group policy" when he tried to use the system restore

  Original title: group policy

  When I try to use the system restore, I get "system restore is disabled by group policy. How can I fix this problem?

  Hi bluelilly,

  1. is your computer connected to a domain?
  2. don't you make changes before the show?

  This occurs if the Configuration policy to disable is enabled on your system, either by using Group Policy or through the registry editor. For stand-alone systems Windows Vista, follow these steps:
  Step 1: Using the Group Policy Editor. If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:
  a. Click Start, type gpedit.msc and press ENTER.
  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  c. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  d. Quit Group Policy Editor.
  e. restart the computer and check the difference.

  Step 2: Using the registry editor
  a. Click Start, type regedit.exe and press ENTER
  b. navigate to the following key: HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  (c) in the right pane, delete the value named DisableConfig.
  d. Quit Registry Editor.
  e. restart the computer and check the difference.

  Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
  See Registry backup

  If your computer is connected to a domain, then we recommend that you post your query toTechnet Forums Windows Vista to improve the assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion 2000: Using the system restore

  I used the system restore in the past and I know it took a few hours to complete with good results, as it eliminated the problem. Last week, I used the restoration of the system, the screen turned blue and the restoration began however this continued for more than 3 days!  I was unable to use my laptop for so long. I saw a blue screen with an icon swirling in the Center. Miraculously, the day 4, he came back to life, but immediately began to update the apps I had checked to only not to do. It took an extra day. Actually, now it's back to normal. I am now afraid to use the restoration of the system again. What I've done wrong?

  Hello

  Thanks for posting in the HP Support forum.

  Could you provide your full computer model - information can be seen from the service tag sticker > > http://h30434.www3.hp.com/t5/Miscellaneous-Topics-Read-Only/Advice-for-asking-the-quot-Very-Best-Question-quot/td-p/83280 ?

  Could you confirm your OS - is this Windows 8/8.1 now?

  I see your previous thread in the attempt to upgrade to W10...

  I'm not sure about what you were wrong (if anything), but

  System Restore is a feature of Windows that usually takes minutes (30 minutes max) in full, not hours, not days. It restores the Windows registry, files/settings of the system to a previous state and is generally quick.

  Do you mean the system recovery or system reset/refresh?

  These are different things. These restore original Windows or format partitions on HARD drive - it can take an hour or 2-3 max but not days.

  If these (especially system restore) lasts days, there is indeed something wrong with the operating system.

  Looking forward to your confirmations.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

• Cannot use the system restore

  When I tried to do a restore of the system after a software installation failed I got the message "system restore is disabled. You want to turn on? "I clicked the Yes button and then got a screen display that she couldn't be turned on because"system restore has been disabled by group policy. When I searched for how to change group policy, they told me to go to start, run and type gpedit.msc. When I tried that I got an error that gpedit.msc does not exist on my machine. Can someone tell me please how to restore the system restore. I am running an old Vaio with XP, but it still works very well this problem.

  Also, I tried it while logged in as an administrator, it is not part of the problem. I do not have a system restore disk because it did not come with the machine and I forgot to make one, but I have a disk of Windows XP with Service Pack 2. Do I have to re - format the entire disk to fix this? I use a sturdy old Sony Vaio, which works very well except for this problem. Any advice would be appreciated.

  How did you delete the system restore?

  I think you have bad things on your computer (or you did at some point).

  If you have XP Home Edition, you have no Group Policy Editor (gpedit.msc), but the error message that you declare (if it's like my examples), indicates that group policy has been changed, so that something has changed.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Perhaps GoBack is it for you to prevent you from using SR then you would be forced to use use GoBack instead and I do not wish to install GoBack to find out.

  Malware "break" things that he knows that you will use to try to get rid of it... like the Task Manager, the restoration of the system, the registry editor, etc.

  The malware is happiest when she can trick you into thinking you need to do a repair installation, use a Restore Point or even a complete reinstall when none of those things are needed that outsmart you, and then got rid of with MBAM and SAS.

  AV tools will not often catch these things because they can not tell if policies have been disabled by malware or if you made on purpose, so just leave them.   MBAM will point out a few of them as suspect and give you the opportunity to correct them if you wish.

  The malware may also know you have XP Home and adjust policies that he thinks that you do not have to be set because you have no Group Policy Editor - This is how he thinks and that's what he does.  He wants that reinstall you XP from scratch.

  First run MBAM and SAS if you want.

  I've done to the top of this edition of registry for you :).  It's an accumulation of things that responds to all things under the sentence "If you see things like...". ».

  If you just want to see if you can get your work of SR and are comfortable editing the registry, you can go here:

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore

  Find and delete this registry key:

  DisableSR

  That's what this line in the file .reg on top:

  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.

  He "skins" (removes) politics DisableSR.

  That will solve your problem of immediate SR, but will not any question that you have not yet set.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  But, as I said, if you have in your registry, you have probably other things too.  My regedit will fix all the things I've seen come with the question SR whether or not they have need of fixing.  It does nothing, it will remove anything that might be there (you have at least one).

  Then, you should broaden your horizons AV because what you use dropped and could not protect your system.

  Or, you can wait and see what other people have to say.

• When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

  I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

  If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Your system is currently or has been reached by malicious software.

  You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Just fix the immediate question:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Now check your timetable for restoration of the system and/or the user account settings page.

• When I try to use the system restore I get an unspecified error response

  Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

  Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 'System restore running system' starts with a black cursor screen while trying to use the system restore

  Original title: unit hanging in the middle of the restoration of the system

  Message "System restore running system" starts with a black screen with cursor, but does not move forward.  Windows Vista question

  Have you tried F8 solutions and when I select the system restore it gives me the message above and goes to the black screen even ugly.

  How did I break the loop so I can start a new system restore?

  Hello

  Are you trying to restore your computer or you try to create a restore point?

  Step 1 or 2 can help you to restore your computer.

  Step 1: Try the steps in the section below, if you haven't tried it.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Step 2: Try restoring the system from the recovery console.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/system-restore-wizard-is-already-running/c797baf7-c069-4e3a-894a-e9644cc6df0b

• How can I get my laptop in safe mode so I can use the system restore

  Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

  Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

  Safe mode is not likely to help, and system restore.

  Your user profile is probably damaged and that Windows has created a new profile for you.  If you are looking into 'My Documents' or 'My images', your old files won't be there - they are in the old profile.  Do a search for your files.  If you find them, you can copy the entire profile.  See http://support.microsoft.com/kb/811151

  Or you can simply copy the desired specific files/folders.  You may need to 'own' the files to gain access to their--> http://support.microsoft.com/kb/308421

• Error when you try to use the system restore: 0x8004230f

  whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?

  I installed Norton utilities 2011 & Norton anti virus

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Impossible to back up my system and use the system restore feature

  I installed 10 Windows and a few days later did a system restore and it was deleted.   I'm able to use Windows 7 now, but I'm unable to save or run the restore of the system at all.

  I get error code 0 x 80041321.

  How can I get this done?  I tried and tried.

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• DirectX can it be cancelled free of charge installs or by using the system restore

  Running Windows 7 Pro, I know that many people here have a problem with games crashing to the desktop on startup, Bad company 2, battlefield 2, world at war cod. much of this is due to having directx 10, or a more recent version, most of them want to work with directx 9 .0c only. If DirectX can be rolled without Setup or by using system restore [Windows 7 with backup function, it destroyed other files added since it was backed up, so I DON'T want TO do this if possible]. I looked around and not seen anything saying how. Would appreciate anyhelp which can be givin.
  {Just FYI-Bad company 2 features prominently on their site that tells you how to configure it to run only directx 9 c, so I don't have a job now}

  Hi KerryT,
    
  DirectX runtime for end-users (also known under the name of DirectX) is an extension for the Microsoft Windows operating system that provides a set of quick material orders, low level that they can use to improve performance for Windows games and multimedia programs. The current generation of Windows games and multimedia programs does not work properly without DirectX. So, by design, you cannot remove DirectX. You can try to install Directx 9 .0c and check if that helps. But, before to try this step, you can create a point system to be on the side course of restoration.
  
  Download link: http://www.microsoft.com/downloads/details.aspx?FamilyID=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en 
  
  To create a restore point, follow these steps:
  
  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.
  2. in the left pane, click system protection.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point
  
  Similar problem: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/8c9db01f-4a6b-4688-bb18-0befb584cb4a
  
  Hope this information is useful.
  
  Umesh P - Microsoft Support