C & C generals zero hour cannot find directx

Similar Questions

• Flight Simulator cannot find DirectX 9 or 10 and does not start

  Installed ATI Radeon 6790 and installed Direct X 11. Re-installed MS Flight Sim X, and he can't find DirectX 9 or 10 and will not run. This can be corrected? In addition to remove the new graphics card and re - install the old man, what else can we do? I run Vista 64.

  Run the setup of directx 9 which is on the cd

• Get older games to run on Windows 7, specifically of Battlefield 2, Civilization 4, Command & Conquer Generals: Zero Hour

  I have problems my old games to run... I have the latest patches (I think) but the problem is now on every two minutes I get sent back to Windows, and I have to click the icon of the game at the bottom of the screen to return.  The games are essentially shrinks at least every two minutes about.  Someone knows what to do?

  ----------

• Command and Conquer Zero Hour does not

  There's this game: Command and Conquer Zero Hour

  He used to work on windows XP but now on windows 7, it does not work I do not know why...?

  This is the same version that worked on XP...

  I FOUND THIS POSTED BY SOME GENIUS CALLED DARKRAJIN AND IT WORKS ON THE GENERALS AND THE GENERALS ZERO HOUR

  This I found on another page and thought I'd share it here as long as it worked for me.

  I have a core i5 laptop running windows 7 Home premium 64-bit with an ATI graphics card and I had exactly the same problems to make C & C Generals and zero hour to work.

  Good news - just managed managed to make it work, and it IS Windows 7 that causes the problem, specifically, it is to do with permissions to access the folders - Windows 7 blocks access to the folders that uses General to run.

  The way I fixed it was:

  In 'My Documents' (usually to the C:\users\YOURNAME\documents), there should be a folder named "Command and Conquer Generals data" or "Command and Conquer Generals Zero Hour data", which was put there when you installed the game.  You must create a text file in Notepad, and then save it in that folder.  However, you need to click on ' Save as ' and change the drop-down list box as text (.txt) file type to "all files".  Then save the file as "options.ini."

  Before you register, paste this text into the file to start:

  Anti-aliasing = 1
  BuildingOcclusion = yes
  DrawScrollAnchor =
  DynamicLOD = no
  ExtraAnimations = yes
  GameSpyIPAddress = 0.0.0.0
  Gamma = 50
  IPAddress = 0.0.0.0
  IdealStaticGameLOD = high
  LanguageFilter = true
  MaxParticleCount = 5000
  MoveScrollAnchor =
  MusicVolume = 55
  Resolution = 1024 768
  Retaliation = yes
  SFX3DVolume = 79
  SFXVolume = 71
  ScrollFactor = 50
  SendDelay = no
  ShowSoftWaterEdge = yes
  ShowTrees = yes
  StaticGameLOD = custom
  TextureReduction = 0
  UseAlternateMouse = no
  UseCloudMap = yes
  UseDoubleClickAttackMove = no
  UseLightMap = yes
  UseShadowDecals = yes
  UseShadowVolumes = yes
  VoiceVolume = 100

  It's just how the game remembers what options you chose (the music volume, brightness and others) and you can change them once the game is running using the menu options.

  Now the bits of the key - first, make sure you have full read/write permissions for the folder Command and Conquer Generals data: to do this right click on the file, then properties then the Security tab and change the permissions for all users.  It could also be useful in making sure that no file is 'Read only' in this folder.

  Change the compatibility mode of the game by right-clicking on the game in the start menu, click Properties, click the Compatibility tab.  I used the "Change settings for all users" button down and changed to Windows XP (SP3), as well as to check the "run as Administrator box".

  Hey Presto! It worked, demystify the myth according to which C & C Generals will not work on 64 bit systems (as some people have said).  In all honesty, I have not tried online multiplayer yet, a few skirmishes.

  Good luck!

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• cannot find siri on iphone or use 5 not in settings

  cannot find Siri on I - phone 5 not in the settings or use...

  Hello

  Siri settings are accessible via settings > general > Siri > activate Siri and, if you wish, allow also 'Hey Siri.

  If these settings are not available, check if Restrictions have been enabled:

  • Settings > general > Restrictions - Siri & dictation.

  More information:

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Receive an error message "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe"." when launch firefox without the inability to use

  Hello!

  It's happened since I got a virus a months ago who was preventing the computer to start. She came back from the repair shop and it begins again now. But after a few hours of using Firefox, this message pop up at random:
  "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe". Make sure you typed the name correctly and then try again. »
  Example: http://www.risingroad.com/foxhound/faq/images/Windows%20cannot%20find%20firefox.jpg

  and Firefox still work after this message appears. I already uninstalled and installed new Firefox completely, and the message still appears upward. What this mean and is it harmful to the computer?

  I'm on Windows 8

  I had the pop up ads sensation can cause the problem and talked about it to the engineer in computer science from my father. It installs Malewarebytes and there was indeed still a maleware by repair men left. The difference was, Chrome to view the full announcement page while Firefox may have in maintaining security to block this kind of page, and the result was the error message. (I didn't know that because it happened to me on my computers to the precedents and even Firefox used to show me the ad then) Thank you for warning me.

• I tried for AN HOUR to find a way to put the two different fonts on the same line

  Pages is crap. I tried for AN HOUR to find a way to put the two fonts on the same line, even if I highlight 1 WORD, the whole line changes (if you know how to do that please tell me, I'll me CRAZY!). Wouldn't recommend, that Word is 100 x better and easier to use

  < published by host >

  Hi varn,.

  Seems to work here (Pages of screen capture):

  

  Select (highlight) the text you want to change. Click on the Format brush, and then click Style. Choose the font you want to use.

  The example above is in the text layer. I also tried in a text box and a table cell.

  I also tried to change the font for a single word of a line of text in Pages for iOS. The police has changed to the selected word, while the rest of the line remained in the police, he had previously.

  Cannot test it in 5 Pages, because I have not installed. The above example is Pages ' 09.

  It is possible that you have applied to a paragraph Style, what would change everything in the paragraph containing the insertion point.

  Kind regards

  Barry

  PS: MS Word is available for OS X, if you feel the need to switch.

  B

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Model VeriStand compilation error: NEITHER VeriStand 2010 cannot find the struct parameter in CGTypes

  Hello

  I get this sequence of messages when I try to compile a model.

  ...

  # Generating API interface TLC.
  ...........................................................
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.c file
  ...................................
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io_data.c file
  Error: # NOR VeriStand 2010 cannot find the struct parameter in CGTypes
   
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.h file

  # File Readme of Ports generating NI VeriStand 2010
  Could not find c:\WorkDir\Models\Pack\pack_l500_ib_plant_fstep_io_niVeriStand_rtw\*.obj
  # Time real workshop build procedure for model: 'Pack_L500_IB_plant_fstep_io' aborted due to an error.

  I tried to repair my VeriStand 2010 installation and always errors.

  I created a VM, installed Simulink and Veristand and tried to recompile the template. Error appers again.

  I changed the "target system" (tlc file) in general relativity, and the model has been compiled without errors. Same VxWorks Veristand target fails.

  If I copy the other target to target VS the second error le.obj goes but I always "error: # NI VeriStand 2010 unable to find parameter struct in CGTypes.

  How can I solve this problem?

  See you soon,.

  Claudio H.

  Hello

  I found the problem but not the reason.

  If I change the Settings of Configuration > Optimization > Parameters Inline unchecked = the template compiles without problems.

  See you soon,.

  Claudio H.

• B209a printer cannot find the new wireless network

  Let me start that I am not very tech savy to start so I read other discussions related to this and could not find a snwer to solve my problem.

  I upgraded my router wireless internet 10 days ago and since then my printer cannot find a wireless connection. That's what I've tried so far, I tried to restart the printer, unpluging it and pluging reconnect, restart my router, myrouter to reset (which knocked my internet at home for hours). The rest of my Office Home phones and cell phones all pick up my network, but my printer can't seem to find it. He said only: "No connection found" on the touch screen.

  I run a wireless network Test report, and he says that he cannot find a SSID. But when I printed on a Page of Configuration of HP network it states that he discovered 5 networks, including mine.

  My wireless router is a rhythm. I have not installed it, did the tech from my service provider. He seemed brand new. I have no way to update its firmware (whatever it is).

  Any help would be appreciated.

  I have solved my problem after reading this thread. http://h30434.www3.HP.com/T5/printer-networking-and-wireless/Photosmart-plus-B209a-won-t-connect-to-wireless-router/m-p/177144#M7026

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

  I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

  Hi @Rieu,

  Welcome to the HP Forums!

  I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

  Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

  Tips for troubleshooting wireless problems

   

• Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

  For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

  I am the administrator and the file is there.

  Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

  Help!

  Perry

  Hi KAD Rebar,.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
  4. You have security software installed on the computer?

  Method 1

  See the link below and run the Fixit tool available, check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

   

  Method 2

  If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads