c:\DOCUME~1\hp_adm~1\temp\dwm.exe and windows c:\windows\srst40.dll load error (this message appears on initialize to top

We had a couple of young teens visit and after that they used it, everything went wrong.

We cannot use Internet Explorer. It is not connected or crashes.

Outlook e-mail working properly and we have problems with programs the impression.

try to launch the system restore and run a restore date prior to the changes
 

--
DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

.

"Joe E M ay" wrote in message news: e0976b4b-96d 0 - 424 b-b85c-56ef30d1e0cf...

We had a couple of young teens visit and after that they used it, everything went wrong.

We cannot use Internet Explorer. It is not connected or crashes.

Outlook e-mail working properly and we have problems with programs the impression.

DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

Tags: Windows

Similar Questions

  • Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

    I get the following error at startup: Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

    Once I click ok, I get the same error message, but it says it could not load or run it from the registry.

    In addition, I can not get on the internet on my PC. I can access the internet fine on my laptop through y network.

    I read how to solve the error message, but I can't get on the internet to access programs. Suggestions? I'm so frustrated!

    Thanks in advance!  :)

    Steve Winograd's right - no executables are normally launched from the Temp folder where you specify unless the malware put them there.

    Your system is currently or has been infected and perhaps your detection/removal software clean the folder Temp of the suspicious content but this process does not always boot entry that points to the location/suspicious file, so that each reboot (or login), he wants to run it.

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.

    I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
    !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove
    .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe

    I get the above message block when I start my computer. I run Ad-Aware, Malware bytes and StopZilla with no luck. He won't let me connect to the internet. Any ideas on what I can do? My wife needs this computer for school work and I need mine to be deployed. Thank you in advance.

    Hello

    Normally indicates that you have or have had a virus. Usually programs do not run in the temp folder.

    You can try an online virus scanner to check the virus first. For example:

    ESET: http://www.eset.com/online-scanner

    TrendMicro: http://housecall.trendmicro.com/

    Once you are sure that you do not have a virus, you can download and run "Autoruns" from Sysinternals http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Download the program, unzip it and run it. After accepting the EULA, it will take time to discover all of your startup items. Go to the bottom of the list and uncheck the item "setings\temp\dwm.exe c:\documents and Settings owner". Autoruns to shut down and restart the PC to see if the error is still in place.

    You can find information on using Autoruns to the same address as above.

    You will need to let us know if this sorts your internet problem.

  • corrupted system file, error: C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run

    original title: corrupted system file

    So play downloaded Games PC error appears constantly C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run. I continually run chkdsk but problem not solved. I am able to play the games but this message is boring and need help to repair

    Hello

    Let us clean the temp folder and check.
    Here's how:
    a. Click Start and type folder in the Run dialog box.
    b. press on enter and delete all the files in the folder.

    Also run Disk Cleanup. Reference:
    Description of the tool in Windows XP disk cleanup
    http://support.Microsoft.com/kb/310312

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

    original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

    Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

    Never use Registry Repair programs.

    They can cause more harm than good.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understand the Extras in Windows Vista and Windows Update info is at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon.

    Mick Murphy - Microsoft partner

  • Whenever I try to open a program, this message appears "Service.exe - Entry Point not found", it is on windows 2000 OS

    Whenever I try to open a program, this message appears twice "service.exe - point of entry not found" is on the Windows 2000 OS

    I hope this helps:

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;324762

    If not, you may need to reinstall the OS Win 2 K / Service Pack

  • Lsass.exe in Windows safe mode system error.

    Lsass.exe in Windows safe mode system error.  I tried to repair and recovery of Windows and he persists?  Any ideas on how to solve this problem?

    Most of lsass.exe errors, if this is the result of malware, is the result of a corrupted registry, specifically in the security hive.

    Follow the steps described here.

    You can also try running chkdsk & an System File Checker analysis if the registry repair does not resolve the issue.

    See you soon

  • My Windows 7 error has occur "" cannot find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

    My windows error has occur "" unable to find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

    Depending on the location, may be a virus/malware

    Try http://www.microsoft.com/security/scanner/en-us/default.aspx

    And

    http://www.Malwarebytes.org/products/malwarebytes_free

  • Windows cannot find C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe not __could not load or run C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe specified in the registry___

    Windows XP SP3

    Lift both of these errors at startup. Click on through one, then a second will appear. Click per second startup continues to load windows and the system is functional.  I did some research, seems quite common to have dwm.exe questions, so not sure how I should be. I guess that this is caused by some sort of worm/virus/trojan. Ran anti-virus scan: Panda antivirus pro 2010 found 3 infections but problem still not solved. Next step?

    No simple AV tool and not every doesn't know everything you need to use more than one scanning program in your arsenal of AV.

    In the perfect world, do some exectutables launch of the Documents and Settings folder.

    It seems that despite your Panda AV, your system is always somehow afflicted.

    Sometimes even the 'best' AV tools are unable to clean up the mess of certain conditions or they can't tell if what they discover is a true infection or something you did on purpose so they will leave him alone, and then do you a little housekeeping cleaning by hand.

    Autoruns is the right idea, but first make sure you have something missed Panda, then use Autoruns if you still have the problem.

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/

    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

    Restart your computer and solve the outstanding issues.

    Autoruns will help you clean up the leftovers, but you have to be as sure as possible that there is no infection rest first.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

    If you are comfortable editing the registry you can find and remove the reference directly from there or remove

    using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.

    Here is a link to a popular registry backup tool:

    http://www.SnapFiles.com/get/ERUNT.html

    You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.

    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

    Scroll through the list and look for a boot entry associated files in the error message.

    If you can't find on the connection tab, look in any tab.

    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

    Restart your computer and solve the outstanding issues.

    Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Windows update fails to initialize wuauclt.exe and window update will not work.

    Windows update fails to initialize wuauclt.exe. Update history shows update Cumulative security for Internet Explorer 9 for Windows Vista (KB2699988) has failed. Command window appears every 20 seconds in train to run wuauclt.exe and closes instantly.

    I tried to restore to a restore point prior (Windows Vista Home Premium 32 bit Service Pack 2). I also run AVG Anti-virus (no virus not detected) and Microsoft Fix it Microsoft difficulty he says he finds and correction of errors in windows update, but the problem persists.

    Any help is appreciated.

    Hi Patrick_Sims,

    1. you receive an error with the message code?

    2. what Fixit did you run?

    Method 1:

    You can reset Windows Update components and check if it helps:

    How to reset the Windows Update components?

    For more information, you can also refer to the following article:

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    Method 2:

    You can try to install the stand-alone package to update based on the version of Windows Vista installed and check if it helps:

    For Vista 32 bit.

    A security update cumulative for Internet Explorer 9 on Windows Vista (KB2699988)

    For Vista 64 bit.

    A security update cumulative for Internet Explorer 9 Windows Vista x 64 Edition (KB2699988)

    For more information, see the article:

    My PC running the 32-bit version or 64-bit Windows?

  • Consent.exe and Windows Update my freezing machine. Related to TrustedInstaller.exe

    I have a laptop running Windows Vista 64 bit and I recently tried to install a new update. However, when I stopped him, he would tell me it was installing the update and freeze it. I let it sit for 3 hours, but no progress before the ' turn off. When I rebooted, I tried to check the updates. I expected the UAC message to come and ask me if I was sure that I wanted to do, but he never appeared. When I tried to click on anything that anybody else, he wouldn't do anything. When I restarted it in safe mode, I don't have a problem (although obviously, I can't install the update to Windows).

    Since then, I tried to run the system restore, MalwareBytes, SpywareDoctor, Windows Defender, chkdsk, sfc scannow and startup repair. None of them helped the problem. Any help would be appreciated.

    Thank you

    UPDATE: TrustedInstaller.exe, which is required for updates, is not running in normal mode, even if I set it automatically runs in the characteristics. I tried to activate it, but needed admin access. If I could get into the elevated command prompt, I should be able to start. However, I don't know if this is possible under Vista. Does anyone know if the RUNAS command can be used at the command prompt to get administrator access?

    Hi AnthonyStump,

    I suggest you follow the article and check if it helps.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    You can also see the article in the Microsoft Knowledge Base and check if it helps.

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

     

    I hope this helps.

  • Whenever I start my laptop, this message appears: DWM - Bad Image C:\Windows\system32\d3d10_1.dll

    Whenever I start my laptop, you'll see this message:

    DWM - bad Image

    C:\Windows\system32\d3d10_1.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

    Please help me with this question

    Thank you

    Shows generally a problem with DirectX see if this previous answer helps

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/system-error-d3d101dll-and-d3d9dll-are-missing/12b3fd74-1083-4193-BBBC-413fdf11edd7

  • I did windows meada the defalt player on my .exe and now nothing works how do I chang this restoration want wark be cause windows meada player comes we'll seek answers

    I did meaida the defalt on the EX_ windows player and now I can't use my computer because windows meaida cannot open something. can't even do a restore windows meadia back once again

    Given that your post clearly had nothing to do with your comments on the web site of Microsoft Answers, I moved it to the Feedback forum where you initially posted to the windows forum "files, folders, and search.  Please return to your message, click Edit located just below, change the drop-down list of the Windows Version for your version of Windows and then click on submit.

  • 'Node.exe' and 'Could not affect work generated process' errors

    Good day everyone,

    Someone came through a generic fix for this problem yet? I tried to use the CC uninstaller and reinstall the latest version of CC, verified file permissions and other solutions I've met yet but still no dice. We have the most recent version of all the CC apps as well.

    Please check: error code: a not give work to process generated. In case this does not help, please share the OS version you are using so that we can try to help you appropriately.

  • After the startup error message: C:Docume~1\owner\Locals~1\Temp\dwm.exe__how I can fix it.

    I ran Malwarebytes Anti-Malware and the following came and I deleted everything that came.  Then, I get the error that I mentioned:

    Malwarebytes' Anti-Malware 1.46
    www.Malwarebytes.org

    Database version: 4725

    Windows 5.1.2600 Service Pack 3
    Internet Explorer 8.0.6001.18702

    30/09/2010 21:36:15
    MBAM-log-2010-09-30 (36-21-15) .txt

    Scan type: quick scan
    Objects scanned: 170298
    Time elapsed: 1 hour (s), 32 minute (s), 59 second (s)

    Memory processes infected: 3
    Memory Modules infected: 0
    Registry keys infected: 0
    Registry values infected: 1
    The infected registry data: 1
    Folders infected: 0
    Files infected: 6

    Process memory infected:
    C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> unloaded successfully process.
    C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> unloaded successfully process.
    C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> unloaded successfully process.

    Memory infected:
    (No malicious items detected)

    Infected registry keys:
    (No malicious items detected)

    The registry is infected:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\svchost (Trojan.Downloader.Gen)-> quarantined and deleted successfully.

    Infected registry data items:
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell (Hijack.Shell)-> Bad: (explorer.exe, C:\Documents and Data Data\Microsoft\Windows\shell.exe) good: (Explorer.exe)-> quarantined and deleted successfully.

    Infected files:
    (No malicious items detected)

    Infected files:
    C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
    C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
    C:\Documents and Settings\Temp\1EF.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
    C:\Documents and Settings\Temp\24D.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
    C:\Documents and owner Settings\Temporary Internet Files\Content.IE5\SCGCF3IX\update[1].exe (Spyware.Passwords.XGen)-> quarantined and deleted successfully.
    C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> quarantined and deleted successfully.

    What can I do about it.  I have windows XP, I got this HP pavilion 555e computer 6 years.  I'm still working, but I don't like the error messages.  Please let me know also where I can learn more about the errors of registry and files.

    try to click on start > run > msconfig

    then under the Startup tab, you will find entries that refer to the programs that are set to start automatically when windows starts.

    You can probably find one of the references corresponding to this faulty .exe and you can turn it off.

    by disabling, attempt to launch the inoculated program will stop and the error warning should also.

    DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

Maybe you are looking for