C# examples fail with "Failed to recognize the type of server or the version when connecting to the host"

I am currently submitting work for P2V conversion from a c# application. I tried to run the application remotely and on-site, but I get this error message (here is the full error):

"< detail > < InvalidArgumentFault xmlns =" urn: Converter ' xsi: type = "vim25:InvalidArgument" xmlns:vim25 = "urn: vim25" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < vim25:faultCause > < vim25:fault xsi: type = "ConverterNotSupportedConnection" > < hostName > RSMITH < / hostName > < / vim25:fault > < vim25:localizedMessage > impossible to recognize the type of server or the version when connecting to the host "RSMITH". " < / vim25: localizedMessage > < / vim25:faultCause > < / InvalidArgumentFault > < / details >

RSMITH is the name of the machine with the VCenter Converter Standalone (5.0) and where I wan the VM to go. It's a Windows 7 SP1. I'm under .net 4.0 winform.

Any suggestions? I'm pretty much run the sample out of the box, except for wrapping a winform around it instead of an application console.

Cannot you telnet from your Converter machine on the source IDE oucederomsurlesecondport 9089 machine?

Tags: VMware

Similar Questions

  • 6 fusion works with El Capitan in the host operating system?

    I saw the thread on the Fusion 7 and El Capitan, but I wonder about the Fusion 6 and El Capitan.  I know that El Capitan works as a guest OS with Yosemite as the host and the latest version of Fusion 6 (I'm under the commercial version of El Capitan in a virtual machine on my Yosemite iMac running), but I have not really improved none of my systems to El Capitan again.

    Thank you.

    I use 6 merger with AE Capitan. It seems.

  • Update ESXi with VCenter VM on the host?

    I am trying to upgrade my host ESXi 4.1 4.1 Update 1, but the VCenter VM lies on this matter.  I have to do to make sure that the DB VCenter is not corrupt, or can I just stop, put the host in maintenance mode and using esxupdate?

    With shared storage, you can:

    • Make sure that you have not activated the mode of locking for guests
    • Stop the vCenter Server VM
    • connection to the host on which it is running and remove it from the inventory
    • connect to the host of the second, browse the data store and add it to the inventory
    • vCenter Server on the second host market

    Generally, you will use Update Manager (if you are using vCenter Server), but in cases where this is not possible, you can also use vihostupdate.

    André

  • How to avoid using the library native ttJdbcCS when connecting to remote host?

    I'm testing the Java program with the product that limits the use of native libraries.
    I use the 'client' mode to connect to TimesTen DB (which is done by using the plug, not the shared memory).

    It seems that even in client mode TimesTen JDBC driver calls the library native ttJdbcCS when doing remote queries.
    Why it does not use Java sockets? What is necessary for the native library?
    Is it possible to eliminate the use of native libraries in client mode of the JDBC TimesTen driver somehow?

    I fear that it is not possible to eliminate the use of native code for TimesTen libraries. Both direct drivers and customer are drivers of type 1 (JDBC/ODBC bridge). In both cases the JDBC driver Java code called NYI optimization library ttJdbc/ttJdbcCS and that the library in the direct or client ODBC driver (also called native code).

    If you want to use TimesTen then you must be able to allow the use of these native code libraries. The only other alternative is to implement your own client/server mehcanism such that you can put your own component 'server' on the machine running TimesTen and then use pure Java to communicate with this component of the 'customer '. Generally, it is however a lot of work.

    Chris

  • System fails to recognize the power supply and will not charge the battery

    Had motherboard replaced but, before that, I had tried a secondary power to check if my principal could be faulty.  Card mother equipped now and all working fine except that I can't get the sytem to recognize my main diet.  Battery won't charge and the system stops if I remove the power supply.  This is on a DELL XPS M1530 laptop.

    Thanks for all the ideas.

    Hello

    Motherboard might not be properly installed or has problems - easy to miss a rider or
    any other connection as well.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
    (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
    Stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • burn video fails to recognize the drive. audio only one third registered

    I use windows media player. for video recording - imation dvd + R 16 x 4.7 GB.. FOR AUDIO - IMATION CD - R 1 x-52 x. 700 mb. I have Ares. I'm going to file transfer. then try tro do drag the file identified in all, clicking on combustion, it tells me to insert a writable disc. I have windows media player, is also useful. Never had the problem before you download the media player. my e drive respond inconsistently.

    What version of Windows are you using?

    To clarify, you say that dvd discs are not recognized and that the cd disks are recognized but will not let you complete combustion?

    The drive reads discs retail normally?

    Assuming that I understand your problem, I tend to point to the drive itself. If there is problems reading discs of detail, a bad drive is the most likely case.

    You can try to perform a system restore before the problem started:
    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  • MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

    I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

    A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

  • System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

    I use "Windows 8 preview version" for the last 4 months.

    I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
    It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
    I want to use internet on a system without the system get crashed, please help me solve this problem.
    I am using Dell Inspiron 15R

    The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

    BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

    The netio.sys is a Windows driver that is involved in the "networking."

    The process that crashes regularly is avgnsa.exe which is a process of AVG.

    I would say to uninstall AVG and see if the accidents to solve.

    He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

    If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

    http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

    If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

  • Upgrade to 4.1 - U1 with stains staged on the host

    I want to upgrade the two hosts that are running 4.0 to 4.1 U1 U2.  A host has some stage patches for 4.0.  Is it possible to not restore the patches and apply the upgrade?  They will delete after the upgrade?  Or what I need to fix these updates staged, and then restore the upgrade?

    Thank you

    You can go ahead and clean up the upgrade of base without cleaning up the existing staging patches.

    VUM will return the error incase there is no freespace available for upgrade packages.

  • problems with hotmail. website to access hotmail but can't do anything when connected. can't click on messages or something.

    using windows xp ie7. When loggwed in Hotmail, I can't click on messages or the buttons on the inside. any ideas?

    After all the Hotmail issues in the appropriate forum found here:
    http://windowslivehelp.com/

  • BitLocker without TPM refuses to recognize the USB key at startup.

    I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.

    What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.

    The PC is an all-in-one RM with an Intel D915GX motherboard.

    I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.

    Any suggestions?

    Hello

    Thank you for you answer and share the status of the issue.

    Sorry for the late reply.

    I suggest you to please update your motherboard chipset drivers

    Follow the link below:

    https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676

    You can also check the drive (that you encrypted) to find errors by following the link below:

    Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    WARNING:

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Additional information:

    In Windows 7 BitLocker Drive Encryption: frequently asked Questions

    http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive

    Deployment Guide for Windows 7 BitLocker Drive encryption

    http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx

    Hope this is useful

  • How to remove a VM inventory in vcentre when the host is down

    Hi guys,.

    We had a power outage today where one of our physical ESX host is dead (we have 2 VM cluster hosts).  HA/DRS unfortunately does not work as there are insufficient resources to automatically migrate the virtual machines on the host failed through to the host remaining (another separate question that I will not here address)

    when the hsot went down, virtual machines have been left in the market, but were in a disconnected state (see table).  I read that you can reallocate virtual machines to another host by 'navigate to the data store and do a right-click on the vmx file and click Add to inventory and select the host. " (Ref: ) http://communities.VMware.com/thread/173314 )

    However when I browse to the data store, the option 'Add to inventory' has also dimmed.  I suspect (Please confirm) that he wwas because the virtual machine in question was still at the "running" State  problematic, because that disconnected/running state, I could not close it out vcentre gui (or console, as host was dead)

    can someone tell me how - if possible - can I migrate the virtual machine to another host, while in the situation described above?

    If this is not possible for future situations where the host is lost, I would be better together virtual machine to stop? (this would allow me to reassign the vms can?)

    see you soon

    The virtual machine will remain in the host inventory and disappear once you remove the host to vCenter inventory. What you then do - at least that's what I would probably - to be able again to power on virtual machines is to register the virtual machine to other hosts on the server vCenter Server (click right the VM .vmx file and choose 'Add to inventory')-after the correction of the host and before adding it again to vCenter Server - connect directly to this host and then delete the virtual machine already 'moved' from his inventory.

    What you need to do after registration of VM for other hosts is to check the VM based backup applications (if used), because the virtual machine will receive new ID.

    André

  • Very new to VMware need to free up some space on the host

    New to a company running VMware ESXi, 4.1.0. I connect using vSphere client.  Made some instruction free, installed a new test ESXi Server successfully created several virtual machines.  Now I want to install a new one on the production server, but before you start wanted to clean the previous IT guy.  4 old VM running on the host on which take place there, I need free of charge.  What is the standard procedure to remove the old virtual machines for free space?  I searched around but can't see anything I hope enough to do it on a production machine.

    For example, select a virtual machine on the host computer, click on remove brings to the top of the dialog box stating "are you sure you want to delete the"VM name"and he has associated with basic disks? If other virtual machines share these basic disks, they won't have access to these drives"I do not know yet the exact definition of a basic disk leaves only if another machine is sharing...

    I tried on my test server and it seems to work but I installed these and did not indicate how it is shared between them that I know and on the production machine, I'm reluctant to roll the dice.

    Any help would be greatly appreciated.

    Well, we are talking about two things here now. Data warehouses and vDisk (hard). When you delete the virtual machine of the disc it will remove only that is the files in the data store, which are elements such as hard, .vmx, .vswp, files etc. of newspapers. It will not remove anything in the data store that does not belong to the virtual machine you are deleted. To see these use your VI-Client and select a host-> go to the tab settings-> then under Select storage hardware component-> in the do right pane right click on a data store and select Browse. a from there, you will see the a file structure that should have the files that correspond to the names of your VMs. Select one of the folders, then to the right, you will see all the files inside. So basically when you delete a virtual disk computer it will delete the file. The big question is you do anything as a group which would require vDisk shared between two or more VM (s) that you do / or do not want to delete.

  • Implementation of the heart rate in the FPGA vi to detect an abnormal termination of the host using the compactRIO vi?

    Hello

    I'm developing an app for the compactRIO systems. I want to implement a heartbeat in the FPGA code that detects if the host vi gave up. I also want the FPGA vi at the stop with a stop of the host vi command.

    I implemented the heartbeat signal within the host vi and the heartbeat counter is located in a loop of the single cycle timed (SCTL) in the FPGA vi. However, I have other loops while in the FPGA vi (b/c I/o analog are not compatible with the SCTL) and so I need to stop several multiple loops with a stop order from the inside of the loop cycle timed (by opposition from a user input, what you can do with a local variable).

    As I have now, when I download and run the code to my compact goal of RIO, and I abandoned the host vi (and not by pressing the stop button), the code in the SCTL stops, but on the other the loop is not. Can anyone help?

    Greetings Andrew P.

    I took a quick look at your code, and while I'm not completely sure of the cause of the behavior that you are experiencing, I noticed a few things in your FPGA code.  First of all, it seems that you use an appropriate method to report the other loop the SCTL is stopped due to the delay of heartbeat.  Secondly, it seems that the logic around the heart rate monitor can be a bit off.  Currently, you are taking the current value of the entry of Heartbeat/command and comparing it to the value returned by the shift register using a not equal to vi comparison.  This allows to detect a change in the status of this entry if the shift register is providing the value of previous to this entry.  However, it seems that you take the value of the comparison is not equal to to fuel the shift register, rather than the current value of the control of heart rate.  What happens if you change?

    Kind regards

    Michael G.

  • 10 comments VM Windows will need to be recreated when moving to El Capitan Yosemite in the host operating system?

    I have 8 Fusion installed on Yosemite. I have a guest VM Windows 10 and works well. When I install El Capitan, do I have to recreate the Windows 10 VM guest or it should run with El Capitan as the host operating system? Thank you!

    Hello

    Upgrade to El Capitan shouldn't matter to your guest operating system, it must continue to operate as is.

    However, DO NOT wipe your drive on the update as then it might erase your VM.

    So best thing - as always - is to make a backup of your VM - with the virtual machine closed down and merge not running - before the upgrade to El Capitan.

    --

    Wil

Maybe you are looking for

  • Can I use Virgin Media email and gandi mail net on same Thunderbird set up?

    Having problem for Thunderbird at the second address Virgin Media email see (new) and webmail not much better. If I create a Gandi net account will both my V Media address 1 and new address Gandi be available the same Thunderbird set up? Regards, Phi

  • GarageBand

    HelloW, I bought an iMac and garageband app came with it.I chose the option download all available sounds and he keeps shoing circles need the sounds that he have not yet downloaded it, but it is not actually download anythingWhat can I do?

  • Break a file .rtf with new names

    Hello I have a huge rtf file which I hope to break in different files based on an identifier that is at the top of each part I want to break up. These files should still be rtf as they all html links I need to keep. The structure of the file is: 3 RE

  • 80072F8F Windows 7 update error code

    Hello I'm having problems with the Updater for windows 7.  I get error code 80072F8F regarding the date and time settings.  These settings are perfect. I tried the solutions found to http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a3a

  • Vista installs updates over and over again

    My PC keps install the same Microsoft updates over and over again whenever I stopped him?