C support AND myRIO 1.0-> symbol... cannot be resolved

Similar Questions

• an add on icon called 'supported site' contains the history of the site supported and cannot be removed or deleted. That's what I want to do, but cannot do so

  In the same menu adjacent to the star favorite is an icon that opens with the name 'Sites supported' and he holdds the history of visited sites (this is not the historical record). I have the site set up for not remembering history.
  Down to brass tacks. all I want to do is permantly get rid of this icon (supported sites) and its history.
  I started Firefox in safe mode, and the icon will not appear. But as soon as I re - open firefox, yes you guessed the bloody icon and all its content is still their.

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac = < Command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Find the module, then select delete.

  However, if there is no button Delete, then it is a plugin.
  You need to remove the main program from your system.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• laptop comes with Startup Repair tool and said then it cannot be resolved, then the laptop is blocked.

  Original title: Hi I am not a techi but my computer laptop girls arrives with the Startup Repair tool and said then it cannot be resolved, then the laptop is blocked. Help! What should I do? Be sure to talk to a techno-phobe.

  Just automatically go for boot errors and nothing more! Help

  Hi JacinthaDahl,

  1. you receive an error code or error message when you start your computer?

  2 have you made changes to your computer recently?

   
  
  I suggest you follow the methods and check if it helps.
   
   
  Method 1: Perform a startup repair, check to see if it helps.
  To run the Startup Repair tool by using the Windows Vista installation disc
   
   
  If you have the Windows Vista installation disc, follow these steps to use the Startup Repair tool:
  (a) Insert the installation disc.
   
  Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.
   
  (b) restart the computer. To do this, click Start, click the arrow next to the button lock and then click on restart.
   
  Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.
  (c) set your preferred language and then click Next.
   
  Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.
   
  (d) click on repair your computer.
  (e) in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  (f) in the System Recovery Options menu, click Startup Repair to start the repair process.
  (g) when the repair process is complete, click Finish.
   
  Referral link: http://support.microsoft.com/kb/925810
   
   
  Method 2: Perform a restore of the system for the installation disc and check if it helps.
  Please follow these steps to do system restore
   
  (a) Insert the Windows Vista or Windows 7 DVD and then reboot the computer.
  (b) when you receive the following message appears, press a key: press any key to start from the CD or DVD.
  (c) set the following preferences and then click Next:
  i. the language to install.
  II. time and currency format.
  III. keyboard or input method.
   
  (d) click on repair your computer and select the operating system you want to repair, and then click Next.
  (e) click System Restore, and then click Next.
  (f) click on restore that you want to use and then click Next.
   
  Note: Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.
  (g) confirm the disks that you want to restore, and then click Next.
  (h) click Finish, and then click Yes when you are prompted.
  (i) when the system restore process is complete, click on restart to restart the computer.
  
  (j) after the computer restarts, click on close to confirm that the system restore process has finished successfully.
  Referral link: http://support.microsoft.com/kb/940765
   
   
  Method 3: You can also check out the link and check if it helps.
  http://support.Microsoft.com/kb/934540

   

• When I try to play a CD or DVD, the door opens and I get a message "insert a support and try.

  When I try to play a CD or DVD, the door opens and I get a message "insert a support and try. But the anti-virus scan of the device and report No. ERROR. Only play is not possible

  When I try to play a CD or DVD, the door opens and I get a message "the drive is empty. Insert media and try. " But many programs, such as antivirus programs analyzing the device and NO ERROR report. It is not possible to play alone.  No player of media, including Windows Media Player 11 or Windows Explorer does not recognize the presence of the media. I tried with many CD and DVD that plays normally on other computers with similar OS and also on DVD players.

  My computer has Windows Vista Home premium with Service Pack 2.

  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Hello

  Click right tab taskbar - task - process - make sure WMPlayer.exe Manager, nor any other
  the player is responsible - in the affirmative PROCESS END on them and try again.

  -----------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
  They may be delivered, but it is generally more economical to replace the disk. Can burn you
  a mastered CD and a DVD mastered on this computer and laptop and other computer
  machines? Can you do the same on the laptop and play in this machine?

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• For recovery media, which is 'start support' and 'media '.

  What is "Bootable media" and "Media" and what is the difference between the two?

  I ask because my ThinkVantage Toolbox is prompting me to "Create recovery media", and when I try to do, it offers me the choice to create the recovery 'Boot' or «Media» media  I would like to know what each one is.  I searched at length but can't find description of what they are and the difference between them.  Please advise: what is it?

  jfatlenovo, welcome to the forum,

  the difference is the following; If you want to create your backups using R & R to the external network or drives the 'start-up support' will allow you to access these backups after the start of it.  * Very important; If you choose to do a disk external drive bootable, this procedure will delete the files you have already stored on it - save it first.

  Creation of bootable media and "data media", which as far as I know cannot be done on a cd/dvd will create a set of so-called "recovery disc" which will allow you to install a system to its factory condition. useful if your drive hard drive dies, want to swap it to a new drive before giving / the system of sale on or have preview around trying to create a system to multiple boot and nuked your master boot record, (read some of the posts in these cards ). Best practice is to use 1 cd, to the 'start-up support', and then on DVD for the rest, probably 2.  This is something that you should do the same if you can not think, for the moment, a reason to explain why you should do it. Better to make now that regret to not do it later.

  Hope this helps

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved

  Setup Wizard Maintenance information
  
  Domain = cl.xxxxxx.com
  Oracle Home DB/d01/10201/oracle /
  Connection string = orcl
  Password = < not displayed > system
  The MW = database schema
  Maintenance Wizard Patch placement = / d01/10201/oracle/DB/eof/patches
  Email for anonymous FTP = [email protected]
  Protocol = http
  Port = 8080 HTTP
  Name of host HTTP Proxy = no proxy used
  Number of HTTP Proxy port = no proxy used
  My Oracle Support Username = [email protected]
  My Oracle Support = < not displayed > password
  Maintenance Wizard password = < not displayed >
  ***********************************************************************
  
  The values above are correct? Y (Y/N)
  Removing old schema Wizard Maintenance (MW)... Fact.
  Create a new schema in the Maintenance Wizard (MW)... Fact.
  Assistant Maintenance (MW) tool schema import... Fact.
  Compilation of the objects schema (MW) of the Maintenance Wizard... Fact.
  Check the status of ANONYMOUS account... Fact.
  Creating configuration files... Fact.
  Creating a DAD embedded PL/SQL gateway... Fact.
  Implementation of XML DB Repository... Fact.
  Creating XML DB Dir images... Fact.
  Creating XML DB Dir of folklore... Fact.
  Maintenance Assistant Java classes.../setup.sh loading: line 1093: /d01/10201/oracle/DB/eof/config/load_mw_java.sh: permission denied
  Fact.
  Creating portfolio for password encryption... Fact.
  Update the attributes declare...
  *
  ERROR on line 1:
  ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved
  ORA-06512: at "MW. EOF_TOOLS', line 2750
  ORA-06512: at "MW. EOF_UTIL', line 171
  ORA-06512: at line 4 level
  
  Fact.
  Stopping listening process... Fact.
  From listening process... Fact.
  Checking the process of listening... Fact.
  Closing database orcl... Fact.
  From orcl database... Fact.
  Preparation to upload static content... Fact.
  Download of static content to images... Fact.
  Download of static content to folklore... Fact.
  
  To start the Maintenance Wizard configuration, go to the following URL
  http://xxxxxxxx:8080
  
  Web browsers supported are Internet Explorer 6.0 and Firefox 3.0 and liked
  
  Completed the installation Maintenance Wizard 2.18.
  
  
  Any idea what this may be?
  Thanks in advance

  The error

  ERROR on line 1:
  ORA-29541: class MW.oracle/support/mw/SupportRuntime cannot be resolved
  ORA-06512: at "MW. EOF_TOOLS', line 2750
  ORA-06512: at "MW. EOF_UTIL', line 171
  ORA-06512: at line 4 level

  is probably caused because /d01/10201/oracle/DB/eof/config/load_mw_java.sh failed: permission denied

  Based on this script, that I would like to check to see if sqlplus is executable from the same environment that you have run setup.sh.

  Before running setup.sh please be sure that your database environment is accessible using sqlplus under user MW.

  You could place a set - x at the top of the load_mw_java.sh so that we can see more production which does not run.

  Source language:

  # $Header: 1.06 load_mw_java.sh 2009-07-24 11:30 procedures ship $
  ## +=========================================================================+

  With the command set - x:

  # $Header: 1.06 load_mw_java.sh 2009-07-24 11:30 procedures ship $
  Set - x
  ## +=========================================================================+

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• new Google Maps saye, my worm 21.0 Firefox is not supported and will not load - how to solve?

  New version of google maps is out. Went to charge and Google says 'not supported', and specifically notes that he wants to WebGL. How fdo to check if this option is enabled, or how to get it... or is it something else?
  Thank you
  Wallt

  Hello, the full version of the new google maps does not work under windows xp: https://support.google.com/maps/bin/answer.py?hl=en & answer = 3096703

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)