C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error when it tried to update to windows live messenger

Original title: installing windows live messenger update revealed a .dll file bad, maybe direct3d related.

I am running windows Vista professional, service pack 2. I just updated windows live essentials, specifically the Messenger and have since lost feature program.

The launch of the program, I get an error message saying:

"
Msnmsgr.exe - bad Image

C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
"

subsequently I do not have much in graphical material in the e-mail program, insofar as a chat window is empty (but I can still type messages and send them, without being able to see, or no response). I don't see this problem in any other program, but perhaps no other programs try to use graphics in this way. In principle, I could downgrade windows live Messenger back to what it was, but that seems more to avoid the problem rather than solve them.

I had a quick glance in the D3D10Level9.dll file, in the system32 folder: it has no size and is apparently empty. Conclude that this file is just broken and needs to be replaced?

An internet search indicates that this file is described as "Direct3D 10 to Direct3D9 translation Runtime". I was wondering if it was a directx problem, so tried to reinstall that. It did not work.

It seems to me that I need a replacement for this particular dll file that actually works, but I'm incredibly careful to find a replacement and the "tips" on how to mess with some arbitrary site system files.

Could someone offer any advice on how I should proceed with this? What danger is there to find me a replacement dll file, change the privileges of the corrupted file, so I can replace it and make the switch? It would be the right thing to do? My analysis of the situation is correct? Could it be solved with a relocation of a program?

Thank you very much

Uninstalling and reinstalling the update of windows for a year that has put the file d3d10level9.dll on the computer, the problem has been resolved.

Tags: Windows

Similar Questions

  • C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

    I can't open windows live mail and other programs that also many installers will not work for this reason.

    I get the following error:

    wlmail.exe - incorrect Image

    C:\Windows\System32\wship6.dll is not designed to run on
    Windows or it contains an error. Try to install the program using the
    the original installation media or contact your system administrator or
    the Publisher of the software to support

    I had to click OK 4 or 5 times to make it go away

    Many installers will not work because of this.

    System information:

    OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
    Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
    Number of processors: 4
    RAM: Mb 5610
    Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
    Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
    Motherboard: Hewlett-Packard, 358B
    Antivirus: Norton Internet Security, updated and activated

    Here's what I did to remedy:

    I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

    I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

    ( 1 copy the file in a place should be on my boot drive (c :) in my case))

    2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

    3 . Select repair your computer and press enter.

    4 . Select the option for command line

    type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

    type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

    type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

    If this does not work, you may need to replace syswow64 system32 in all the above instructions

  • Bad Image C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error

    Hey,.
    Everytime I open an application I get the following message
    C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error
    The program of all the work after clicking on ok
    This has happened since my last update automatic
    Im running a fairly new HP with vista home premium 64-bit
    This is not the first time that this happens and im HD crashed a few weeks ago.
    So basically, it is a clean installation, a few weeks ago.
    IM thinking it is a 64 bit to 32 bit problem accentuated by the updates but I ng3epa have no idea
    Help

    Hi, cdg59!

    It seems that your system is damaged.

    You might want to try the suggestions in this post: http://linenbach.com/tiki/tiki-view_blog_post.php?find=&blogId=1&offset=60&sort_mode=created_desc&postId=465 that talks about how to solve problems with wtsapi32.dllprecisely.

    Alternatively, you can look over The system in Vista Recovery Options (http://windowshelp.microsoft.com/Windows/en-US/Help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx), specifically Startup Repair (http://windowshelp.microsoft.com/Windows/en-US/Help/5c59f8c1-b0d1-4f1a-af55-74f3922f3f351033.mspx).

    Please, let us know if this solves your problem or you need assistance!

  • C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.

    original title: C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for pension

    The battery died and when I restarted my computer I started having this error message last week whenever I start my computer. Explorer opens but doesn't load properly, not usable.  Service pack 2 is installed when the first available.
    C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support
    I tried MS fixit but nothing helped.  Need help.

    Chances are that you see the effects of ongoing hijackware infection!

  • C:\Windows\system32\wpd_ci.dll is not designed to run on windows

    When connecting my ipad or iphone 4s, I get the following error, and the device is not recognized in itunes.  I have uninstalled and reinstalled itunes and been on th phone to Apple with the chance of the o.  Any ideas?  Thank you

    C:\Windows\system32\wpd_ci.dll is not designed to run on Windows or it contains an error.

    Hello

    Your question is on iPad, iPhone, and iTunes; who are all the Apple products.

    Please try their focus groups.

    Here is a link to the iTunes from Apple community:

    https://discussions.Apple.com/community/iTunes

  • The bad image error. C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

    Whenever I try to install the material using a USB port, I get an error from the bad image. It is said:
    C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

    Any help will be useful.

    Thank you
    Jeff F.

    Hi Jfog18

     

    1. what material are you trying to install?

    2 have you installed for the device that you connect software?

    3. were you able to connect the hardware device much earlier?


    Method 1:

    You can analyze your computer using online for computer viruses antivirus scan. Rerailway to the link below to complete the virus scan online. Check if this help -
    http://OneCare.live.com/site/en-us/default.htm

     

    Method 2:

    You can perform a SFC scan and check if the problem is resolved.
    To Perform a Scan SFC -
    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
    b. type the following command and press ENTER:
    sfc/scannow
    A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
    c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
    d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
    e. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link below for further guidance on scan SFC - mentioned
    http://support.Microsoft.com/kb/929833

    I hope this helps.

  • 'C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error' whenever I turn on my computer

    Hello

    My computer was freezing whenever I turned it on in normal mode. It is also frozen when I turned it on in SafeMode with network. After that, he would not be able to start up. At one point, I was able to boot into safe mode and do a system recovery to an earlier point in time that I tried it and it worked. I am now able to boot into normal mode. But whenever I start my computer, I get this error message:

    "C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error...". »

    I want to assure you that I can solve this problem. Can you help me? Is this a Vista problem? This would resolve if I installed Windows 7. I was already thinking to do this...

    Thank you!

    Replace damaged files by your Vista DVD files:

    http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • "Winword.EXE - bad image" "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try the program mode.

    Original title: 'Bad image 32 system error'

    Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

    This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

    It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware.  Examine for example the Uploader on VirusTotal.com and checking the results provided here.

    Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.

    Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).

  • Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

    Help, please!
    I started my computer today and it came with this error:

    "sidebar.exe - incorrect image.
    Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

    I click on OK, then he said:

    "Acrotray.exe - incorrect image.
    Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

    I click OK and then it says:

    "hpqtra08.exe - incorrect image.
    Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

    Also I got an error report saying that windows sidebar stopped working.

    My computer is VERY slow in all the commands I give.
    I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

    Do you have an idea what is happening with my computer and what I can do to fix this?

    Thank you very much!

    Hi deacon829,

    You did changes to the computer before that happened?

    Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If you try to install any application before this program, try to uninstall them.

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

    Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

    Look for steps to restore of the system in the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    If the problem persists,

    Step 4: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error" appears randomly

    Original title:

    The title above guard poop upward on my screen, I don't know what to do about it. in the box it says also "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation medi or contact your system admisistrator or the provider of software for support. .... BUT I do not understand what is the program and everything I try to repair by ATI shows nothing abnormal. HELPPPPPP!

    Hello Deborah,.

    I suggest you perform a System File Checker analyzes your computer and check for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • Error MESSAGE "C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error."

    C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system or software support provider administrator.

    How can I solve this problem
    Comments will be appretiated
    Guillaume Ramond

    Original title: error MESSAGE

    Hello William,.

    1. when exactly you receive this error message?

    2 did you do changes on the computer before the show?

    3. you are trying to install or run a program in this error message?

    This could be caused due to damaged DLL files.

    I suggest you to perform system File Check to fix the corrupted system files, and then check how it works.

    See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

    Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

    Try this and respond with more information about you to provide the best solution.

  • C:\windows\system32\MFC42u.dll is not designed to run on Windows or it contains an error, open MSCONFIG, MMC or paint

    Originl title: MFC42u.dll

    I have a situation where when I try to access MSCONFIG, MMC, or all things, paint on my box of Win7 it's return to launch that "C:\windows\system32\MFC42u.dll is not designed to run on Windows or it contains an error.  I tried SFC to correct this, and he says he can't.  Short of a relocation, does anyone have an idea as to what I could do to fix this?

    I did further research and found an article about this problem with an update of safety with an associated fix.  When I get a second I'll post the article.

  • Error message appears when you try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error

    Original title: icm32.dll error message of World of Warcraft

    Error message appears when I try to connect to World of Warcraft.  The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error.  This pop-up has an "OK" button that you can click, but the message appears again and again.  I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged

    System Type x 64-based PC
    Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
    BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011

    What should I do to solve this problem.  And any idea on what may have caused the problem.

    Thank you

    Hello

    1. What is the exact full error you get when you try to play the game?

    2 have you made changes on the computer before this problem?

    Method 1:

    I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2:

    I suggest you to check the question in the clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 3:

    I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

    If the problem persists, contact the game manufacturer for assistance.

  • I can't in windows at all and a bad picture slui.exe message comes up saying that c:\windows\system32\rpcrtremot.dll is not designed to run on Windows. What is the devil?

    Computer went bad after several problems, but after that I tried to do a restore, went up the wrong at worst... start, computer can not go beyond error message saying Windows\system32\RpcRtRemote.dll... What is with all these DLLs in endangered or get damaged.

    Hi Hurigeorge,

    ·         You're able to boot in safe mode?

    ·         Since when are you facing this problem?

    ·         You did it last changes before the show?

    Method 1:

    Step 1: I suggest to start in safe mode, please see the articles below:

    What is safe mode?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: I recommend you perform the clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: Try the SFC scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I hope that helps!

  • c:\windows\system32\winscard.dll is not designed to run on windows or it contains an error.

    Every time I restarted, the above message appears. Currently the mouse and printer works is not on this computer. I tried a software to analyze and solve problems, but I still have the same problem. Also, I tried to reinstall Vista, but it was not successful, it says there is a problem it seams not to understand.

    Hello
     
    1. have you made recent changes on the computer before the issue started?
    2. what program did you use to analyze and solve the problem?
    3. what error message when you tried to install Vista?
    4. are you able to connect to the computer and boot to the desktop with success?
     
    This happens usually if a system file is missing or damaged. If you are able to log onto the computer successfully, try the next step.
     
    Step 1: Sfc scanner to fix missing or corrupt system files.
    1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.
    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    2. type the following command and press ENTER: sfc/scannow
     
    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
     
    For more information, please visit this link: http://support.microsoft.com/kb/929833
     
    There are other troubleshooting steps that we can do to solve this problem, please try the step above and post back with the results, so that we can help you further.
     
    I hope this helps.
     
    Kind regards
    Syed V
    Answers from Microsoft supports the engineer.

Maybe you are looking for

  • Apple Watch Workout: How to share training on social media

    I use the app to drive on my Apple Watch regularly. When I save a workout, it doesn't seem to be a way to visualize the results later. In addition, unlike other training applications, it seems not to be a way to publish a training on Facebook or Twit

  • Airport the Time Capsule Configuration for desktop?

    I have an airport Time Capsule that I use for support and wireless connectivity to the top of my MacBook Pro.  I have a PC connected to the time Capsule of internet access to the desktop PC.  Is it possible to set up backups from the PC to the time C

  • Webcam on Qosmio F60 flashes blue and Red

    Hi guys, I have a Qosmio F60. The problem, I think that I am facing right now, it of the flashes between blue and Red webcam for awhile and goes back to blue. And it's kind of hot behind the webcam on the laptop cover. Is it supposed to become hot wh

  • Cannot scan with PrintControl App

    I bought a M1217nfw because it was an eprint printer and print control enforcement says he supports the 1200 series.  Make this printer with the app work?  Is there a wireless all-in-one that works with the application?

  • my computer does not start what is wrong

    When I try to log on my computer screen is just _ like this and whats the problem and how can it solve this problem