c:\windows\system32\ntoskrnl.exe is currupt
Hi gurus,
I am running vista professional.
When starting my computer, I get system32\ntoskrnl.exe - cannot verify the signature
I then insert the disc and choose repair
A system recovery screen opens with Windows Vista (recovered) - load drivers or next
A load the drivers of C: or CD?
I also noticed I have a Boot (x :)) - don't know what it is?
How can I re-mode Vista?
In the C:\system32\ntoskrnl.exe when I select
I get a pop up specified locotation does not provide information about your hardware
Add drivers?
Don't forget that I can not open Vista?
Thank you
Albert
Hello
· What is the exact error code or the message you received?
· Have you tried starting mode safe mode with networking?
I suggest you perform the steps below and check it, if it helps.
1. boot in Windows Vista CD WinRE.
2. Rename C:\WINDOWS\system32\ntoskrnl.exe
3. copy ntoskrnl.exe in C:\WINDOWS\system32 C:\WINDOWS\system32\dllcache of
4 reboot
You need to load the driver on the CD: when it asks.
To reinstall Vista or related topic, please follow the link below.
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
hope this solves the problem.
Tags: Windows
Similar Questions
-
File:\windows\system32\ntoskrnl.exe
I need serious help!
Some wonder how I deleted some system 32 - files
Anyway now I can not connect my computer backinto.
I am running Vista Business as my OS
At startup, I wonder to insert my disck installation and restart - does not work - also tried repair - same result
The error:
File:\windows\system32\ntoskrnl.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file
Please can someone help?
Thank you
Albert
Heya,
Here are some links that may help solve the problem. -
Original title: black screen
Attempt to restart the Gateway system running XP Pro. The message "Windows has not start because the following file is missing or corrupt:
\system32\ntoskrnl.exe" Please reinstall a copy of this file. What do I do and where is this file? There is a good chance that the disk check running the Recovery Console will solve the problem.
1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
6. at the end of the output of scan type > press ENTER.
7 restart your computer.If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console
-
Toot of Dell Inspiron 910 windows system32 ntoskrnl.exe error
I booted up my laptop Inspiron 910 and got the following error message:
Windows root system32 ntoskrnl.exe missing or corrupt please reload the disc.
I tried several attempts through the advanced options [F8] and always comes back to the same error message. I changed the BIOS to allow the disc to load first. I put the Microsoft Windows XP Home Edition SP3 CD and you press a button to start. Setup begins to install the files, but then I get the blue screen of death.
It reads:
A problem has been detected and windows has shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0X0000007B (0XF7A5E63C, 0XC0000034, 0X00000000, 0X00000000)
I also run diagnostics and got these error messages:
Error Code 0F00:0244 Msg: DISK_0_Block 13533192 cannot read, replace the drive or remove the write protection
I also have the same error codes in the following blocks:
13533193
13533194
13533195
13533196
13533199
13533208-13533215
13533224
13537707
Any assistance or solutions would be useful!
Thank you
Hi rmina71,
· Have you made changes on the computer before this problem?
Follow the steps in the article.
-
Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:
\SYSTEM32\NTOSKRNL.exe is missing or damaged At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.
I am running Windows XP operating system.
Is there a solution for this?
Thank you
Hello
· What is the number and the model of the computer?
· What is the service pack installed on the computer?
Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477
-
need to re - install < root windows > \system32\ntoskrnl.exe
My computer does not load Windows. I use XP Professional Sp3 (I think). My drive is XP Professional SP2.
When I try to boot from the cd, I finally get to a screen that gives me the Windows installation press options 1) enter or 2) to repair XP using the recovery console. Press r.
No matter which option I choose, I get the message "implementation did not hard disk drives in your computer."
I pressed F8 and used the "disable auto reboot" and received the message "Windows has not start because the following file is missing or corrupt:
\system32\ntoskrnl.exe please reinstall a copy of the above file" How can I do this? Thank you, the Safi
Shouldn't you have the following option under integrated peripherals:
On Chip IDE - SATA Controller [SATA, RAID or off]
You don't want RAID!
You should be able to select SATA and then SAVE the changes that you exit the BIOS (sometimes people forget this step!).
Not all mobos have the ability to disable sata ahci. The sata/raid controller driver is needed for windows recognize the drive sata hard. Having the pilot does not mean that you have to configure or use the raid features. RAID is simply two working as one of the hard drives. Most of the drivers manufacturer mobo that I take care of combine sata and raid drivers for the controller in a single package. Here is an example of a driver for Intel Matrix Storage Manager. It is a common driver needed for Windows to recognize a disk sata hard connected to a motherboard Intel. If the options as shown in the above post by Jose do not appear in the bios then install drivers, as I said. For this reason, Windows gives you the opportunity to press F6 to install the drivers before the implementation.
Intel(r) 82801ER SATA RAID Controller
PCI\VEN_8086&DEV_25B0&CC_0104=%systemdrive%\drivers\MSD\IMver5\iastor.inf; I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/ -
Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:
\System32 \ntoskrnl.exe.
Please reinstall a copy of the above file.I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.
can any1 give me a simple cut down on what to do (step by step).
Thanks in advance.
Hello Jamdutch,
Thank you for your message. Click HERE for instructions to perform a repair of the system installation. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt:
\system32\ntoskrnl.exe. Please reinstall a copy of the above file. I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.
I tried to restore my computer and there is no restore point.
I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:
Turn on your computer and insert the CD or the DVD of Windows Vista.
Install Windows page, follow all of the instructions that appear, and then clickInstall now.
On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.
On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.
On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.
Follow the instructions on each page. On the type of installation do you want? page, clickCustom.
On the place where you want to install Windows? page, select the partition where you want to install.
Click next to begin the installation. You can see a compatibility report.
and then had this error that says;
windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.
Now I am stuck and don't know what to do.
Someone at - it solutions for me. Help, please.
Hello
1. on which the drive was initially installed OS?
2. What partition you selected to install Windows?You can try to perform a startup repair by using the Vista installation disc.
Check out these links for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsHow can I fix a startup (startup)?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problemWhat to do if Windows does not start correctly:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaIf nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.
Kind regards
Afzal Taher - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP. How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?
Susan77,
Try the items listed in this article: http://support.microsoft.com/kb/314477
It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria! -
I have windows xp home edition version 2002 with computer acer bought in 2006 from Bahrain
Hello
You need a Windows XP installation CD to start and follow the steps outlined in the article below to solve the problem.
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
http://support.Microsoft.com/kb/314477I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
cannot connect to the system, root windows > \system32\nloskrnl.exe... is missing
my computer, it I can't to this topic, tells me what the title saids.
original title: root>\system32\nloskrnl.exe windows... is missing
Hi, Skillsaw45,
Try the following:
1. start the Windows XP CD recovery console.
2. Rename C:\WINDOWS\system32\ntoskrnl.exe
3. copy ntoskrnl.exe in C:\WINDOWS\system32 C:\WINDOWS\system32\dllcache of
4 reboot
-brubber (MVP)
http://social.Microsoft.com/forums/en-us/whssoftware/thread/1e21375f-5166-44BA-BE24-9c0cbb04212c
-
Free download windows root system32/ntoskrnl.exe
My pc using windows XP Home Edition will not start massage says file missing or corupt
/system32/ntoskrnl.exe is it possible to download this file on a cd on a different pc and install the file in the pc easily? Thanks for any HELP! Hi LorraineParker-Jackson,
· What is the number and the model of the computer?
· Do you remember any recent changes made before the show?
· What is the service pack installed?
I suggest you follow the steps in the link below and check if it solves the problem.
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
http://support.Microsoft.com/kb/314477
I hope this helps.
-
When I pass my computer on a message informing you that windows didn't start because a file is manquant-windowsroot7\system32\ntoskrnl.exe, can you help me?
* original title - computer error! *
Hi shortie083,
You did it of any material changes or software on the computer before this problem?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
Root Windsows > \system32\ntoskrnl.exe
a missing file... Windows didn't start because the following file is missing or corrupt:
\system32\ntoskrnl.exe. NetBook Acer doesn't have a CD player and I don't have XP disc... cam loaded on netbook. How can I fix it? You probably are able to restore the factory settings, but it is important to keep in mind that this removes all the data files and installed programs that you will return to what it was when the computer was purchased. You must recover all data files before you try to restore. To recover files, you remove the hard drive and put in an external 2.5 USB enclosure and connect to a USB port on a different computer. You can then access and copy of the reader because it becomes an external drive of the computer.
http://www.Amazon.co.UK/2-5-SATA-eSATA-external-enclosure/DP/B000S89NQG
http://en.kioskea.NET/FAQ/2040-Acer-PC-Restore-to-factory-settings
-
I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loudI know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?
I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path. *
* Use .symfix to get the debugger to choose a symbol path. *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
Computer name:
Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
System Uptime: 3 days 5:21:50.657
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
................................................................
................................................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}
The kernel symbols are FALSE. Correct symbols to do the analysis.
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
Probably caused by: ntoskrnl.exe (nt + e95c)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: fffffa7fffffffea, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002c5a95c, address memoryDebugging information:
------------------The kernel symbols are FALSE. Correct symbols to do the analysis.
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.MODULE_NAME: nt
FAULTING_MODULE: fffff80002c4c000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f
READ_ADDRESS: could not get nt! MmSpecialPoolStart
Unable to get nt! MmSpecialPoolEnd
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
fffffa7fffffffeaCURRENT_IRQL: 0
FAULTING_IP:
NT + e95c
fffff800'02c5a95c? ???CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0
STACK_TEXT:
fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2STACK_COMMAND: .bugcheck; Ko
FOLLOWUP_IP:
NT + e95c
fffff800'02c5a95c? ???SYMBOL_NAME: nt + e95c
FOLLOWUP_NAME: MachineOwner
Nom_image: ntoskrnl.exe
BUCKET_ID: WRONG_SYMBOLS
Follow-up: MachineOwner
---------I'm grateful for any help I can get in that case.
My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU
Postal salvation,
I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.
Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).
Here's how to new:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.
virus/malware programs:
Symantec:
Works in Safe Mode and free:
_ http://security.symantec.com/sscv6/WelcomePage.asp
Trend Micro
_ http://housecall.trendmicro.com/
Ad-ware/spyware:
Ad-aware
Spybot Search and Destroy
http://www.safer-networking.org/
* It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.
See you soon,.
Steve <> Microsoft Partner
Maybe you are looking for
-
Apple music songs download on Mac
I have loaded many songs in Apple's music in my music on my iPhone and they play very well, but when I try to play them in iTunes on my Mac, they do not play. They are listed on my Mac, but do not play. If I click on the download icon in the upper r
-
Police in width fixed in the control chain
I do it an alignment in the text control and that you want to use "fixed point" or are monospaced, Consolas. Font Consolas is very basic fonts in all windows and Notepad and shows the "zero (0)" as you can see the attachment. I placed the police for
-
kV-32hs510 reset nvm system data
I was reading the repair read the warning... Note: Be careful when you use the remote control! It erases and resetALL data including the data of ATV, otherwise reset NVMcorrectly as follows: Well, I'm going to the bottom of the list thinking I was sa
-
I just installed a WRT610N and will install a WPC600N & WMP300N. Are these WPS type devices? Where I can just break through the button on the router and let it do, it is thin? Thank you Kevin
-
Develop my creative plan Cloud
Hello, I recently bought Creative Cloud Plan for photographers, but now I need to buy Adobe Illustrator, so my question is: How can I add it to my plan and how much to pay? Thanks in advance for your information.