c\windows\system32\spoolsv.exe
THIS ERROR THE PRINTER IS CRAZY. NO SOLUTION WORKS FOR GOOD. THE PRINT SPOOLER STOPS EVERY TIME OR EVERY OTHER TIME IT IS USED. IS THERE A SOLUTION FOR THIS?
Hello
Please do not type in capital letters as it is difficult to read and considered to be shouting.
------------------------------------------------------------------------------------------
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e
===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).
Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems
Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
------------------------------------------------------
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/
Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx
If you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------
Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htm
How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html
------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Recently my computer showed an error of 'Interactive Services '. When I click to see the message it says something about a 'runtime error '.
"Program: C:\Windows\System32\spoolsv.exe '.
The application requested execution to terminate in an unusual way.
For more information, contact the application support team"
Also since this error started upward, I had problems with the help of Firefox, iTunes, and Microsoft Word. I also was unable to redownload C++ as one of the solutions on this website told me to do. I tried to perform a "clean boot", but there was now changing. Please help me.
Hi LirrulTopz,
Please see the post below with a similar problem and fix possible?
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I constantly get an error message that an application requests an execution it unusual way.
Microsoft Visual C++ Runtime Library
Program: C:\Windows\System32\spoolsv.exe
Recently had a Lexmark technician solve some printing problems.
Hello
Is the error specific to execution of any program or is this random?
Please follow the links below to solve the problem.
Method 1
Try to leave you is clean boot computer in order to eliminate the causes as interruption of third party software.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2
Run a file system Checker to verify system files corrupted.
Run a System File Checker tool
http://support.Microsoft.com/kb/929833
Method 3
Remove temporary files in the folder of spool.
a. click on start
b. type Cmd (right-click and choose Run as administrator before you open the program)
c. Type or copy paste the following command
net stop spooler (press enter)
d. navigate to C:\Windows\system32\spool\PRINTERS
e. delete all files with the following extensions
*. SPL and *.shdf. copy - paste the following command in the command prompt window
net start spooler (press enter)Now restart and check if you receive the same error message.
If the steps above do not in normal mode, and then repeat the method 3 in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Hope this helps
-
windows\system32\spoolsv.exe
Hi emilee ely,.
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Visual C++ and would be better suited in the Visual C++ community. Please visit the link to find a community that will provide the support you want. Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can not start the print spooler as it says that the following file is missing. C:\WINDOWS\system32\spoolsv.exe. How can I download it?
Do a search on your computer, it may have been accidentally moved to another directory. You can also run the System File Checker:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833or you can just try to copy the file from another computer.
-
The error message above appears whenever I start the computer. The exact message is as follows
Runtime error
Program: C:\Windows\System32\spoolsv.exe
"This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.
Thank you very much for the help. I did the safe mode start which has not corrected the problem. I pass on the clean boot method. In accordance with your instructions, I eliminated the elements until I found the software that has been the cause of the problem. To my astonishment, that it was of "Pure Networks Inc.", that is, I'm sure you know, my Linksys wireless router from Cisco. ONC program has been eliminated so was the mistake. I will now contact Cisco to try to find a repair/patch for the issue.
Thanks again for your help!
Gary
-
errow message dll or c:\windows\system32\spoolsv.exe
original message - errow message dll or c:\windows\system32\spoolsv.exe...how fix you?
Hi, Debbie Ann,.
A. when exactly do you get this error?
B. when it last work very well?
In the meantime, you can perform an auditor of system files (sfc scan) on your computer and check if it helps.
http://support.Microsoft.com/kb/936212
Bindu S -Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
runtime error c:\windows\system32\spoolsv.exe
runtime error c:\windowa\system32\system32\spoolsv.exe
How can I solve this problem
Hello(1) when exactly you get this error message?(2) remember to make changes to the computer before the show?I suggest you to follow these steps and check if that helps.
Step 1:Try to start the computer in safe mode and check if you get the same error message, here the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf you are not able to find the problem in safe mode to perform step 2.Step 2:
Try to perform the clean boot and check if it helps, here is the link:
http://support.Microsoft.com/kb/929135
Note: Make sure that restore you the computer to a normal startup mode once the diagnosis is made. Follow step 7 of the above mentioned link.Step 3:I suggest you a scan currently running on your system.Hope this information is useful. -
I noticed my extra long taking computer to start from a few days ago. I can't access the internet until the second message appears after the error message. This message says "spooler subsystem app stopped working and was closed". I have Norton 360 protection and my OS is Vista Basic. I did a scan antivirus with no problems detected. The only time that this message is when I start my computer. Help!
Hi DawnKemm
Method 1:
You can check if the problem occurs in safe mode. In safe mode; you have access to only the drivers and base files.
Check out the link to start the computer in safe mode and then check-
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
If you are not faced with the question in safe mode, then you can check in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
-
After the system boot, I get an Interactive Services dialog detection box that says: "a program cannot display a message on your desktop. When click on what I see the message in the title of this post. This happens not all the time, but most of the time. It also affects our printer Lexmark wireless. On occasions, that this error occurs, some time, we can always print without problems and sometimes, or afterwards, we can print is no longer. Once he loses the ability to print, he lost until we have try to restart again. I tried to launch the microsoft tool accessible fromhttp://support.microsoft.com/kb/324757 Fix
This tool found a problem with the spooler and printer Lexmark and says that fixed it. However, after rebooting the machine twice, I had the same problem of error described above. I ran the tool again, this time, he did not find a problem. I only tried to print only a few docs and has worked until now... but I do not think that we printed enough to think that he actually corrected this problem. Any help you can provide would be apprciated! Thank you!!!
Hello
Perform a clean boot to verify if a third-party program or service is the cause of the problem. With the help of the boot, we can isolate the program
and disable it.Refer to this article for more information:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Steps to perform a clean boot:
1. click on the ORB start on your desktop
2. type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. in the general tab, click Selective startup.
4. under Selective startup, clear the check box load startup items.
5. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
6. click on OK.
7. When prompted, click on restart.NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 of the article mentioned above.
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get this message for WINDOWS 7. All the forums, I checked are very old, nt, vista. Help, please.
I updated windows yesterday and it came this morning. The computer does not work correctly. I can't imagine that a printer spool is causing all the problems. startup, Web pages very very slow, some are not used McAfee. When I view the details, he said: "... occurs when a program is not completely compatible with windows." Visual C++ is a windows program. Run all the scans available until I heard from someone.
HII Justferg,
Try the SFC scan on the computer.
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
My printers do not work and I can't add a printer... work through the help and FIX IT I guess that the print spooler service is MISSING.
I went to services and right-click on it and he was 'ARRESTED' when I START slick... it says that the file cannot be found... HELP Please
Hi, please try this:
- In the Administrative Tools folder (click Start, then Control Panel, then system and Maintenance and then Administrative Tools), open the Services snap-in.
- Locate the print spooler service in the services list and confirm that the status is started. If this is not the case, select the service, and on the Action menu, click Start.
I hope this helps.
If this does not work, you may uninstall the printer and download the latest drivers from the manufacturer's website and re install. -
How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.
Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.
Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager. Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.
Assoc .exe = exefile
Assoc .lnk = lnkfile
-
help \Windows\system32\winload.exe file is missing or damaged
Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM
\Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.
Hello
1. what operating system do you use?
2 did you change on your computer?
Method 1:
I suggest you to follow the links and check out them.
Startup Repair
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
Method 2:
How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
-
Original title: files missing error
Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe. Everything started after I ran scan and scan deleted some files infected. However, I can use the system. Where and how to download the missing files? Or how the system does not deliver messages?
Simon
Two of the three files are probably part of the malware infection and not the files infected. The third is probably the same details in this link:
http://www.Runscanner.NET/file/Hkcmd.exe.htmlTo identify what loads when you start using Autoruns (freeware from Microsoft).
http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspxWith Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. You will find the three points and they will have a description 'file is missing' against everyone. Your antivirus software has removed the files, but not the startup entries in the registry. All you need to do is delete the entry using Autoruns to eliminate the error messages.
Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.
Maybe you are looking for
-
I will be able to uninstall the update of the ios 10.0.1 software
I don't really like the new update for my iphone 6 s. I will be able to uninstall it?
-
Equium P300-16 t - alarm sound at startup
Hello My laptop is having problems to start the system. I get an alarm sound when you turn it on, so I wonder through a diagnosis of repair. I made this several times and also to reset the settings to factory once, but he continues to do. Also, I kee
-
Microsoft Visual Basic 2008 Express SP1
where can I find the load down?
-
I tried upgrading the BIOS using the HP website, but this failed. The BIOS can be updated to remove the restriction? Or, please advise what dual band network card is approved for the DV3 2300ea? I want one that will support 5 GHz and n wireless Than
-
for awhile now, I have not been able to install "Security Update for Windows Media Player 9 for Windows 2000 (KB979402)", through windows update. I always failed, and here are the steps I took: (1) tried to use windows update. the program launches, r