'C0000005' exception Access Violation error when I open application of embroidery

Similar Questions

• Get an Access Violation error when playing games

  OP: Access Violation errors!

  I have download games on a game site that I trust and don't usually have problems. In the last 4 months, some of the new games that I downloaded and tried to play, give me the Access Violation error when I try to open the game to play the demo. Now just recently I noticed that several of my games that I bought and played for months, give me also Access Violation errors. I worked on it for months with people in customer service (on the site of games) and have not solved. The strange thing is, I can play some of these games on different websites without any problems or Violations of access at all. Yet the customer service people keep trying to 'fix' my computer, as if it were from my computer something to make this happen. At this point, I'm so frustrated that I had to try to get you all to see if anyone has experience this problem before and/or solved this kind of case before. I tried to turn off my Norton before download and play without success. I've updated everything that could be updated in regards to drivers, and such go.
  My system is Vista 32 bit, IE8, Norton Security and anti-virus.  Thanks for any help!

  Hello saund477,

  My research, I find that it is a known problem with Big fish games. I also see that some users were able to solve this problem and play games by disabling the antivirus program on their computer.

  I suggest that you turn off the Anti Virus program and check if you are able to play the game.

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  You can refer to the thread below that I found that the forum of Big fish:

  http://forums.bigfishgames.com/posts/list/4106.page

  I also suggest that you post your question to the Bigfish forum for a better answer to this question, because the problem is only with Bigfish games:

  http://forums.bigfishgames.com/games/list.page

  About the error when you try to run the command, it seems that you type the command correctly, make sure that you type the command correctly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Access violation errors when I try to play games: 0X0180C4D1

  In the last week, I started to get an error message more (but not all) of my games and can not play.  The message is:

  Error: violation at 0X0180C4D1 (tried to read from 0X01FA0290), program terminated access.  Technology on the game site has no
  previously encountered.  Anyone know what this means?

  Hello

  1 did you change on your computer?

  2. what game you try to play?

  3. you play games online on Internet explore?

  4. What is the exact error message you received?

  5. what web browser are you using to play the games?

  Method 1:

  I suggest you perform the clean boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 2:

  If you use Internet explorer, I suggest you to see link and check.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Access violation error when you try to read the program 0 x 00000000 program completed.

  This error message keeps popping up when using certain programs.  Inevitably, it stops the program and I lose all data.  The upgrade of Vista SP2 has made things worse, and now my system is crawling along as it has not been fed over the years.

  Lou,

  What firewall and antivirus/security suite is used?

  The system was scanned with the antivirus software installed and said AV has been updated with the latest definitions?

  Can you please post including 'some programs' you are talking about.

  Maybe a maintenance tasks common system can help, clearing Temporary Internet files, cookies and history in Internet Explorer

  Use the cleaning disc http://www.vista4beginners.com/Disk-Cleanup>

  CCleaner - when disk cleanup is not enough http://www.vista4beginners.com/CCleaner

  How to use Check Disk (chkdsk) in Windows Vista http://maximumpcguides.com/windows-vista/how-to-use-check-disk-in-windows-vista/>

• While playing axis & allies game I get this error message "thread PRINCIPAL caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94".

  I have an old axis & game cd-rom of the allies that gives me a fit. I get an error message and instructions on what to do, but there is no what to do. So, here is what the error looks like with bells and whistles of boxes/windows.

  Fatal error of initialization:

  thread HAND caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94

  Then, he wants me to send log files that do not exist to "Atari." Heres so I know... This error is an access violation, which means that a certain part of the space no longer exists on my computor. Is there any help?

  Running win 7. must use compatibility to run cd rom.

  It allows to run fine with no probs.

  Thanks in advance for any advice.

  Original title: can not play my game development boo hoo...

  HI U.C.Newman,

  Thanks for the reply.

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• Error when you open Add or remove programs: "failed to create value" At Line 451 how this can be corrected?

  Once all updates completed, I now can't add remove programs to work.

  I get the following in a box error message: "failed to create value"at line 451.

  Someone knows how to fix this?

  Hi ZebWebb,

  1. What service pack is installed on the computer?
  2. You have security software installed on the computer?

  If you have recently installed Windows XP SP1 on the computer, then see the article and check if that helps.

  Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

  http://support.Microsoft.com/?kbid=823768

  If you have not installed Service Pack 1 of Windows XP on the computer recently then check if the problem persists in the safe mode and after return details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• "Access denied" error when updating driver

  My monitor is an HP w2207h (screen 22 "HD flat).  I get "Access denied" error when you try to manually update the driver by using Device Manager.  When I use the installation of HP or Windows Update utility, I just got a message that an error has occurred.  I've recently updated my NVIDIA driver using windows update (VISTA 64).  On reboot, I get a message asking me to select a driver for my HP flat screen monitor.  When I try to install the driver by using the auto option or by downloading manually from HP, I get an "Access denied" error message.  I am the administrator on the computer.  Can you help me solve this problem?

  It is alittle bit of a lenghty process, but it should help to solve the problem. Follow the steps in this KB http://support.microsoft.com/kb/315539 to show the devices 'hidden' in Device Manager. Browse the list of drivers installed for the graphics card and remove all drivers that are "grayed out" then uninstall the drivers for your monitor. Restart the system and try to install the driver at that time here.

  What can be produced is installed the drivers can interfere with the currently installed driver and this should allow the system to update the driver correctly.

• In Windows 7 my Movie Maker gives me an error when I open it

  IM using windows 7 and my moviemaker works with xp and gives me an error when I open it, what I have to do

  See what the first link says about your mistake.

  How can I correct the common errors of Movie Maker?
  http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-common-errors-FAQ

  Have you checked for an update of your video card driver version?

  http://www.Google.com.au/search?q=make+sure+your+computer+meets+the+minimum+system+requirements+before+trying+to+start+Movie+Maker+again%2c&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = e6pHUILMFaqriAehtoHACg

• Why do I get access denied error when I try to connect to the printer?

  * Original title: Please help me

  Why do I get access denied error when I try to connect to the printer?

  Hello

  Try right-clicking on the printer software when installing it and select run as administrator.

  See you soon.

• Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

  Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

  John has provided all of the above resolution, could follow please this new https://helpx.adobe.com/creative-cloud/kb/Download-error-apps-tab.html

  In the case where you do not succeed please contact support.

  Concerning

  Stéphane

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• EvaluatingTteststand 4.2.1: Null, an access violation (error 17502) pointer when trying to use a std::map mixed mode / push shared_ptr class contained in a DLL interface from a different DLL

  Hello.

  I worked on a test system that will potentially TestStand to its base and downloaded/installed the 4.2.1 assessment. The latest information of the information dialog box are:

  TestStand engine version 4.2.1 (4.2.1.83)

  Verison 4.2.1.83 sequence editor

  The system will push mobile radio using interfaces serial RS232 devices, usnig a variety of protocols series (Hayes and some protocols binary owners for other work).

  We already have in existence, a tester of soaking, written unmanaged dll in VS2005 with MFC and also managed dll that is mixed together to provide the different aspects of the functionality required for binary protocols.

  I created:

  1. a "wrapper"master"DLL for the constellation of the other dll - it offers a simple C API interface that I hope TestStand will use. "We call it"SerialSessionMgr.dll"

  2. a mixed managed / unmanaged "IJW" (it works) DLL that wraps Protocol binary log control interfaces, which are entirely management C + c++ / CLI: DLL calls "master" wrapper"this as an unmanaged interface to create instances of the class compiled by CLI which interfaces to the underlying managed dll imlpementing protocol logging. It's called "WinTseInterface.dll".

  Until I started evaluating TestStand, I struck up a test harness using CPPUnit / MFC, with which I could test SerialSessionMgr.dll and its ' use of WinTseInterface.dll and check that they worked. The sling load the DLL dynamically at runtime using AfxLoadLibrary() trying to emulate the TestStand way he uses.

  When we opened a TSE session:

  1. The SerialSessionManager made a call to the WinTseInterface.dll to 'create' an instance of logging. The instance is created in a std::map held by the CWinApp derived class, this map contains boost::shared_ptr of the class that works with a managed class. So we have a record of appeal: Client app-> SerialSessionManager {TseStartSession ()}-> WinTseInterface {WINTSE_GetWinTseBridge ()} - just WINTSE_GetWinTseBridge() creates a new instance of the unmanaged class through the managed CLI/C++ class interfaces slot, which returns the address of the SerialSessionManager, that stores.
  2. The SerialSessioManager actually initializes the WinTseBridge using a method of a class of virtual interface implements pure C++ class in the std::map in the WinTseInterface DLL. The call to initialize passes various details and actually called 'New' to create the managed class which of your interfaces to the underlying managed DLLS that implement the protocol logging.

  My DLL loading logs as seen in VS2005 debug output are joined this message in PDF format

  While trying to solve this problem, I tried:

  
  

• When you use my mobile internet, I get an EA 5005: 0 x 80070002 access violation error.

  I have a mobile internet usb key, I tried to use the other night and I now get a warning EAccessviolation I then try to uninstall the program, and I get an error 5005: 0 x 80070002. Can you help me please?

  the OS is Vista 32 bit
  program is called Rogers Connection Manager

  original title: impossible to uninstall a program

  You received this error when you want to uninstall the program from programs and features?

  Make sure you run it as administrator and try to download the installation file and run it and in the installation program, it should give you option uninstall and if not, then reinstall it and restart your PC and then try to uninstall.

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think