C000021a error: {fatal system error} when starting laptop PC M30 series

Similar Questions

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• error when starting application switching.

  error when starting application switching.

  You are running version 120.15.12010000.3 adstrtal.sh

  adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.

  USE: adstrtal.sh < appsusername/appspassword >

  < applications_username/applications_password > adstrtal.sh - secureapps

  adstrtal.sh - nodbchk

  adstrtal.sh: leave with the State 1

  Database and listner properly.

  am able to connect from server applications without any problem.

  As binary owner run

  CD $ORACLE_HOME/bin

  . / genclntsh

  It will recreate binary libclntsh

• error when starting agent planner3.0 in connection server5.2 mode

  I'm now deploy see 3.0 BOF Horizon view 5.2 planner, planner is downloaded from site(Viewplanner-3.0.0.0-1174010_OVF10.ova) web internal version, but will produce an error when start agent view server5.2 online scheduler,.

  Traceback (most recent call last): File "c:\python26\lib\site-packages\win32\lib\win32serviceutil.py", line 806, in SvcRun self. SvcDoRun() file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\serviceagent.py", line 73, SvcDoRun, file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\twisted_interface.py', line 39, in listening file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py", line 36, in __init__ file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py', line 58, in readServerInfo IOError : (2, "No. such file or directory ', 'C:\\IP.txt')

  I found there is no IP.txt file in C:\ and then manually create, add content:

  HARNESSIP = 10.189.112.133

  VIEWIP = 10.189.112.132

  LOGIN = administrator

  PASSWORD = ProArp13 #.

  Domain = cqmccloud.com

  but restart the agent service, remain of this error takes place, any help? Thank you!

  PS: (2, ' No such file or directory ', 'C:\\IP.txt'), perhaps needs c:\IP.txt, not C:\\IP.txt.

  Henry

  This file is put in the package during the installation of the harness. If you skipped this step, it is likely that the IP.txt file was not in the packages of the agent.

• Error when starting the weblogic Server

  Hi all
  
  I get the following error when starting the weblogic server (10.3.5.0). I couldn't access the EM.
  
  < 9 July 2012 19:00:23 IST > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.EMDClientInitializer.setHttpConnectionTimeout(EMDClientInitializer.java:97)
  
  at oracle.sysman.eml.app.EMDClientInitializer.init(EMDClientInitializer.java:85)
  
  at oracle.sysman.emSDK.svc.ServiceUtil.initService(ServiceUtil.java:94)
  
  at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:432)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
  
  ... more than 40
  
  PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.
  
  < 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  Truncated. check the log file full stacktrace
  
  >
  
  < 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:1242)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:482)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  Truncated. check the log file full stacktrace
  
  >
  
  < 9 July 2012 19:00:49 IST > < error > < hats > < BEA-149231 > < cannot create the activation to true for the em application state '.
  
  weblogic.application.ModuleException:
  
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
  
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  
  
  
  
  
  How to solve this problem. Pls suggest me.
  
  
  Kind regards
  Deena.

  Copy the file http_client.jar in $ORACLE_HOME/Yes/jlib to $DOMAIN_HOME/lib. Also check if the classpath has been defined for this under $DOMAIN_HOME/bin/setDomainEnv.sh jar file

  https://forums.Oracle.com/forums/thread.jspa?MessageID=10200685

• ORA-1033, ORA-00020: ERRORS WHEN STARTING THE DATABASE

  Hi... I am the server of Oracle 11 G (11.1.0.7.0) and here is the overview of the alert.log.
  
  It seems that 2-3 processes had problem while starting up... but later, they began... I checked in the alert file.
  
  ________________________________________________________________________________________
  ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00450: background process "CJQ0" is not started
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00450: background process "CJQ0" is not started
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  
  
  ________________________________________________________________________________________
  
  
  This doesn't come very often, but once in a blue moon... so is there a reason behind it? because it seems an error when starting only?

  ORA-00020: maximum number of processes (string) exceeded
  Cause: All process status objects are in use.
  Action: Increase the value of the initialization of the PROCESS parameter.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17766/E0.htm#sthref23

• Error when starting server in UNIX environment

  Hello
  
  I get the following error when starting the server:
  
  Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) start.
  ---------------------------------------
  Type: error
  Severity: 40
  Time: Thu Jun 3 06:41 2010
  File: project/webcatalog/localwebcatalog.cpp line: 761
  Properties: ThreadID-1
  Geographical area:
  saw.catalog.local.readObject
  saw.catalog.local.loadCatalog
  Saw.webextensionbase.init
  Saw.sawserver
  
  Error outside of the catalogue of presentation.
  ---------------------------------------
  Type: error
  Severity: 40
  Time: Thu Jun 3 06:41 2010
  File: project/webcatalog/localwebcatalog.cpp line: 761
  Properties: ThreadID-1
  Geographical area:
  saw.catalog.local.readObject
  saw.catalog.local.loadCatalog
  Saw.webextensionbase.init
  Saw.sawserver
  
  Error outside of the catalogue of presentation.
  ---------------------------------------
  Type: error
  Severity: 20
  Time: Thu Jun 3 06:41 2010
  File: project/sawserver/main.cpp line: 338
  Properties: ThreadID-1
  Geographical area:
  Saw.sawserver
  
  Error loading of security account.
  ---------------------------------------
  
  
  Tried to use a unstructured lock.
  The current owner thread ID: 0 (0x0)
  The current thread ID: 1 (0x1)
  Lock pointer: 0xf2a2efa8
  Lock created in the file: server/include/Utility/Generic/SUGRecursiveLock.h
  Lock created online: 34
  Lock created in the function: NQRecursiveLock < NQCriticalSection >: NQRecursiveLock
  Error in file: server/Utility/Generic/NQThreads/SUGCriticalSection.cpp
  Error on line: 242
  Error in function: NQCriticalSection::Acquire
  
  [/ orapsdev/BI/setup/sawserver.sh[7]: 786638 trap (coredump) ITO/cancel
  
  Kindly help to find a solution to this.
  
  Kind regards
  Rahul

  Hello

  I came accrossed this kind of problems before, when I checked the log, I found almost the same error that you mentioned and BI Preenstation services is not started upward.

  As my experience, there is something wrong with the catalog of presentation, I changed the catalogue at samplesales and it's ok, so I fired the specific catalog, and then it's ok.

  I hope this can help.

  Thank you & best regards
  Henry

• Windows XP Pro. Svchost use 100% system resources when starting. What is the purpose of svch.exe?

  Windows XP Pro. Svchost use 100% system resources when starting. What is the purpose of svch.exe? RWM

  Hi r_miller,
   
  Follow the suggestion given in this article to resolve this problem:
  FIX: When you run Windows Update to check for updates that use Windows Installer, including Office updates, you may experience a memory leak, or you may receive an error message for the Svchost process

• Satellite M55-S325 - error when starting of the OS and reinstall

  OK, so I got the Satellite M55-S325 for awhile.
  But after a while, he started to read errors when trying to log on to my normal account, so it me logged on temporary.
  After you perform a system restore and go back to my old account, I backed up my work just in case it happened again - and he did.

  This process is repeated several times until the laptop has reached the point where it starts... the windows splash screen appears, but after it is loaded, it will restart and go to the crash of the screen where I have the option "Start windows normally", when I press this option, he repeats the entire process of restarting after the splash screen.

  I tried to reinstall the operating system, and it worked once. It has been fully functional for a few days after I installed the necessary drivers. But then it happened again (the repetitive cycle of rebooting). Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.

  Someone has an idea of what's going on?
  What is the motherboard, or a damaged drive? Maybe something wrong with the BIOS? I have to get a new HARD drive if it's associated drive?

  Any help would be appreciated, thanks.

  Hello

  > Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.
  I think that this could happen due to HARD drive failure if you get an error during reading of data from the HARD drive then the first device that should e tested is the HARD drive.

  If you n t want to buy a new disk only to run tests, then you could contact the mobile technician who could check the HARD disk and could eventually replace them.

  Welcome them

• A message from Microsoft Visual C++ Runtime Library error when starting

  In the last three days, I ran into a strange error whenever I turn on my laptop. When starting (before it reaches the screen where I can connect) I get the following error message:

  Microsoft Visual C++ Runtime Library

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.

  When I click 'OK' or 'x', the message will disappear, reappearing moments later. This continues anywhere from two or three close to two dozen times before that I can finally access the screen to connect. I tried to reinstall the components of Visual C++ libraries and also reset the computer with msconfig absolutely without success.
  My laptop is a Toshiba Satellite, the operating system is Vista and I did not any notable change in the past week.

  Hi JA_603,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Microsoft-Visual-c-runtime-library-runtime-error/61f42f35-7B18-491F-BAE3-e2669199cc85

  I hope this helps!

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• c000021a error when installing Windows 7

  I have just a coppy of windows 7 and I tried to install, after putting the cd in the drive and restart the compuhter. Windows began to load the files and after a while her seemed Blue Screen of Death with a message: "Stop: c000021a (fatal system error), the initial session of the process or system process ended unexpectedly with status 0x00000000 (0 xC0000001 0x001003f0)." The system has been shut down. »

  Does anyone have a solution?

  Thank you

  You run the Windows 7 Compatibility Checker?
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

  I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

  The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

  I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

  To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

  If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

  Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

  That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 80070057 error when start to create a disc of reapair?

  Does anyone know about the 80070057 someone knows about air 80070057 creating a repair disc error when creating an ERD?  Tried to load the ISO file to know avail.  Tried running command line recdisc, nothing.  Tried to run system recovery, nada!  Ran sfc/scannow, not!  Short of re - install... Any thoughts?

  Thank you

  Clay

  Hello

  Thanks for posting your query on Microsoft Community and your efforts to resolve the issue is much appreciated.

  According to the description of the problem, you cannot create an ERD and get the error code 80070057. The question might be if there is a corruption of system files or the responsible for the backup of files get corrupted. So, try the steps below and see if it helps you to solve the problem.

  Method 1:

  I suggest you to consult the steps described in the article mentioned below and see if it helps you to solve the problem.

  "0 x 80070057" error message when you back up files in Windows 7

  http://support.Microsoft.com/kb/982736

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  Method 2: Try to create a repair disk in a clean boot state;

  Perform a clean boot.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. To start the computer bot clean you can see the steps in the below link.

  http://support.Microsoft.com/kb/929135

  (a) start the system by inserting the Windows 7 installation disc.

  (b) when it gets to the main window, click repairin the lower left corner.

  (c) select command prompt from the main menu of the repair.

  (d) at the command prompt, type in recdisc, and then ENTER.

  (e) you will get the popup to select what drive letter to create the recovery disk to.

  (f) have a clean DVD into the DVD drive, and then select start.

  It has to become your created system repair disc.

  Important: To reset the computer to start as usual.

  Note: When you have finished troubleshooting, follow these steps to start the normal start.

  (a) click the Start button, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Error when starting Virtual Machine

  I get this error when you start virtual machine

  Message from localhost.localdomain: VMware ESX

  Could not find the virtual disk "FedEx, Windows 2008.

  R2.VMDK ". Please check that the path is valid and try

  Once again. Failed to open the disc

  ' / vmfs/volumes/4bf00f15-0c137e98-8169-00221 -.

  9880d 03/Windows 2008R2 FedEx/FedEx 2008

  Windows R2 - 000004.vmdk' or one of the

  It depends on the instantaneous discs. Reason: the

  system cannot find the specified file.

  Info

  2010-06-02 04:09:32

  root

  
  
  Brent W Peterson
  
  My blog staff non-techie, unconnected with

  I use nano as my editor, but you can also use vi.  Also, I would make it to the console