C100 CDRW/DVD-RW driver problem

Similar Questions

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• P30: DVD - RW drive problems

  I was recently unable to watch DVDs on my satellite P30 using my DVD player (MAST * a DVD-RAM UJ-820 s). My dvd settings have been set to code 1 when I bought the laptop. Since last week, I get an error message 'Error reading media' when I try to play the dvd. All decoded still play dvd. I tried to use other programs other than the windvd installed and windows media player, but it certainly isn't a software problem.

  Can someone help me with this?

  Hello

  You can try to make a firmwareupgrade of mast * one site!

  But when the disc or only the lens is damaged we must change the entire disc!

  When you are sure that it's a hardware problem, you should contact a Toshiba Service partner. The technicans check drive and maybe change it!

  campino Bye

• TS-L632D DVD +-RW Drive problem

  I have an Inspiron 6400/E1505 with Windows Home XP SP3.  I'm having a problem with my DVD player. I am able to play all DVDs and the photo looks good. However the sound choppy. I played the same DVD on an external DVD player and the picture and sound are perfect.  I try to update the driver/firmware and downloaded the file 'DE04-2' of the Dell site. After that I extracted the file, the application "SFDNWIN3.27.11.exe" appeared, but I was not able to open or run the installation.  Is could someone please tell me if the problem with my drive keeps the driver/firmware? If so, how can I use the application?  I thought that the driver/firmware should start with 'R '.... ».  Any help is appreciated.  Thank you.

  PS: I used to be able to watch a DVD in my player without problem. I just discovered this problem when I tried to play the DVD lately because generally, I use my laptop for watching DVDs.

  
  

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Driver DVD ROM & DVD + RW drive problems

  For some reason any time my DVD Rom and my DVD + RW readers had a problem. In Device Manager, I get a yellow exclamation and error "damaged or missing. (Code 39) "Apart from these TWO discs. Can anyone help?

  It is a common problem with the Windows operating system. Microsoft has created a tool to solve this problem. You can run the tool of the Internet link following which will identify the problem and solve the problem:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• TSST corp CDRW/DVD TSL462C driver does not work

  Hello. My D610 CD-RW/DVD unit does not work. I ran all the tests for CD/DVD diagnostic disk and they are all OK. The driver appears in 'yellow' in the system drivers list.

  I willl appreciate any help/reccommendation.

  Thank you

  
  

• CD/DVD ROM DRIVER PROBLEMS

  WHENEVER I TRY TO INSTALL THE NEW SOFTWARE TO A CD ROM IT DOESN'T SE NOTHING HAPPENING WHEN I RAN MICROSOFT FIX IT HE DETECTED A PROBLEM, IT SAYS CODE OPTIARCDVDRWAD-7563AATA 10. IT SAYS CONTACT MANUFACTURING. SOMEONE CAN ME SAY ANOTHER OPTION.

  or you could possibly answer the question and let the mods redirect?

  Saqueena, this is a pretty General error. http://support.Microsoft.com/kb/310123 let us know if find you a solution in this KB and post back.

  MCP. MCDST. LVL 80

• Dimension C521 CDRW/DVD combo drive error

  Device rom TSST corp CDRWDVD TS-H493A SCSI CD Windows can not load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I'd appreciate any help in what direction to go with that.  I searched around, but my computer knowledge is very basic.  He won't even try to play a disc at all.

  
  

• Sat Pro 490xcdt & compatible SD-2212 of CDRW/DVD combo?

  Hi, I hope someone can tell me if a Toshiba CDRW/DVD combo drive (model # SD - 2212) is compatible with a laptop Toshiba Satellite Pro 490XCDT?

  I searched the web and the toshiba FYI compatibility site but did not find any indicating one way or the other.

  Thanks for any help or suugestions.

  Hello

  Well, I put t know if this player is compatible with this unit, but I found other readers that are supported:
  Part numbers: P000242100, P00025200, XM - 1602-B, ZA2000P04

  Please visit this page where I found this info
  http://store.Yahoo.com/priorityelectronics/p0tosapro49s.html

  Good bye

• Problem M30 Satellite DVD - RW (drive SD-R6112)

  I have a satellite SM30-106 with a SD-R6112 DVD/RW drive. When you enter the drive says DVD - RW drive in my computer. The marks on the drive itself where the eject button says dvd rom/r/rw. However, when you go into the properties of the drive of the pilot says dvd - rom info. When you put in any blank DVD disc, it does not recognize or recognizes a CDRW. I tried Nero etc, but nothing seems to write. When you put a dvd - ram disc in and click dvdform it says no disk is not inserted. Software DVD RAM supplied with the machine, but nothing seems to want to write on DVD or CD - RW. Please can anyone suggest a solution?

  Hi Clive,.

  First of all, I don't think that the SDR6112 can handle discs DVD-RAM at all. According to the specs of the device, it will load only DVD-R/RW and CD-R/RW. I assume it's the least format the discs you are trying.

  Secondly, is this a recent problem or was it always like this? If you right click on the device in my computer, there should be an option on one of the tabs to allow digital writing please make sure of course that this box is checked.

  Finally, you can reload the drivers of devices (from the Toshiba website) and see if it improves the situation.

  HTH

• Portege M200 error - CD/DVD drive problem - Code 39

  I have a problem. I would like to perform a recovery on my m200 Tablet System.

  I have a dvd external drive (as the m200 has not built into the player) and the correct recovery disk.
  However, because of a problem that occurred some time ago, there is a problem with the driver (+ Windows cannot load the driver for this hardware device.

  The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.

  If someone knows a way I can fix the driver, or another way to perform a system restore, it would be extremely useful!
  A solution to the problems of one or two would be great.

  Thank you very much!

  Hello

  > The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
  Are you sure about that? This code appears in running the operating system but recovery doesn't run under the operating system currently running.
  Please try to start the recovery procedure and let me know exactly what is happening.

• Drive cdrw/dvd satellite 1950 801

  Where can I find a list of compatible cdrw/dvd player for
  My Satellite 1950 801?

  Thank you

  Hello

  Visit the following site and check what type of drive you have. You can then choose a fitting replace drive!
  http://www.Toshiba-Europe.com/storage/index.asp?nav=Hom&page=Hom&frame=home

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Equium L300 error - CD/DVD drive problem - Code 39

  * Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) *.

  This message appears in the Device Manager under CD/DVD ROM drives for my laptop and does not have any cd / dvd.

  I don't know a lot about my operating system or your laptop computer in general except that it is a Toshiba Equium L300 under Vista Home Premium

  Can someone help me with this you problem?

  You are looking for in this forum for solutions and similar discussions?
  I remember that this was already posted and discussed several times here in the forum.

  I remember that the solution is simply. the upper and lower filters must be removed from the registry key.

  As I have said; Forum search option allows to get more details!