C210 M2 hangs at "hardware platform, configuration and test".

Hello

We did a MMIC and update the BIOS on one of our servers to the latest version. System tells us that everything went well and the logging in the BIOS also worked well.

The confusing thing is, even if the BIOS itself showed the correct version, the Webgui interface shows the old one.

After leaving the BIOS screen and restarting the server twice for the installation of the OS, it now crashes after "memory test" to the 'config '. and test. step of the hardware platform.

Even trying to perform a recovery of the BIOS translates into find resumed his success after a few seconds and then (scope of the BIOS / show details in CLI changes status of recovery of the BIOS called "None") stops.

We´ve deleted each addtl. material such as PCI-card expansion and key USB system, cannot find error messages or stuff like that, we have simply wants this configuration and test step.

has anyone seen similar behavior or idea how to move forward here?

Rgds.

Markus

Hi Markus,.

Try resetting the CMOS (see link below) configuration

With the help of the J1E6 of the rider Clear CMOS (Page 36)

http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C210M1/install/C210M1.PDF

Tags: Cisco DataCenter

Similar Questions

  • C240 M3 blocked "memory configuration and test..."

    Hello

    This server was returned by just us to Cisco, which had lent because it was new.   We try to return to service, but have encountered the following problem.

    At first startup, the server receives as much as 'memory configuration and test..' message.  Just this message, it shows no progress in actually memory test.   After a few seconds it turns off, and then turns upward again, repeat that a few times before sit down you with the "memory configuration and test.." message at the top of the screen, but now also showing the address IP of MMIC inside.   The four led above the power button shows green fixed and switch ID unit than the blue LED power buttons, as they should.

    I can get to the MMIC login screen, but the password to the default password so can't get farther in this direction until we discover the new username/password details.  Unless anyone knows how to reset the default MMIC.

    I tried the following recovery steps...

    (1) if we set the J2065 ' Clear CMOS' jumper, the server doesn't work.  It powers up to the day before, but does not respond when you press the power button.

    (2) to the "recovery" of the J2068 rider don't seem to have any effect, the server does not read the USB key recovery file.

    Any ideas?

    Thank you

    Tony S

    I remove the CMOS battery for a while, put back in place, try again and if still nothing... I would look for a motherboard replacement.

    -Kenny

  • UCS 200 M1 power Hang @ 'configuration and test of memory, please wait... »

    Hi all

    I am new to the solution of the UCS and tried recently updated the BIOS via the host update utility and MMIC. There were a few warnings version that prevented the upgrade, but I was able to update the firmware of the NETWORK adapter.

    CIMC is at version 1.0.2 and BIOS at C200.1.4.1.0.071320110702.

    I'm not sure how to read the version of the BIOS however.

    When the server is turned on, there are 3 long beeps and it crashes to the configuration and memory test, please wait...

    In any case, I am tired of the BIOS recovery procedure using the J1E5 jumper without success.

    If anyone has experienced this?

    Thank you in advance.

    Calvin.

    Host upgrade utility is not supported until version 1.2.

    This may have been the cause of some of your upgrade issues.

    You run a BIOS of 1.4 to what I see. You will need to update your version MMIC for version 1.2 and the. Use the HUU to 1.4

    Sent by Cisco Support technique iPhone App

  • Configuration and test reagent breakpoints

    So I try to work out the kinks with setting breakpoints and test them.

    A no matter what we tried this application from Google.

    Tester of breakpoint. -He clings to your browser for

    1200 px

    992 px

    768 px

    480 px

    Is this enough to test it all? What happened between the test point when you drag the width of the browser and the site begins sliding and completely combining between breakpoints?

    What is the best way to manage this alignment sliding and updated?

    Thus, for example, that you create a test with these points of rupture site and a box in the middle that is 100px x 100 x 1200 breakpoint. You put some text in the box. Make adjustments in other breakpoints and it seems good but sliding the browser beyond 1200 box roughly stretches. Between the two breakpoints of the wagons of text above until it reaches the breakpoint and corrects itself. What are you doing for the inbetween the breaking points?

    What is the best way to stop this?

    Thank you

    B

    I was defining my breakpoints in 1600, 1440, 1280, 1024, 960, 768, 480, 320. That's a lot, but everything seems to be lining up well on all devices. You can make your non progressive box on any breakpoint. You can also correct its position on all breakpoints, or only those you choose. For the most part you can lock it if you must. Also, don't worry about what it looks like when you descale on the desktop. If you use the breakpoints I listed above it will look good on computer or device to anyone. BTW, I got the breakpoints that precedes Nike design criteria.

  • the error message "Windows Easy Transfer for Windows 7 is for a different hardware platform"

    When I try to install Windows Easy Transfer for Windows 7 to receive files from my old computer running XP32 error message appears "Windows Easy Transfer for Windows 7 is for a different hardware platform"

    What version of Windows 7 you are running 32-bit or 64-bit?

    You try to install the correct version of Easy Transfer?

    There is a 32-bit version and a 64-bit version.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  • VAPP hardware platforms

    All,

    I learn that the hardware platform for the 502/503 VAPP 7 includes consolidated vmware tools, but to add more than 8 cpu requires 8. platform material if it is not possible to change this hardware version on a paralytic. Is this correct?

    Well, Yes and no

    There is no officially tested/supported/recommended way to do this for the vc_ops product.

    but '' in general '' versions of material can be improved if you use virtual machines on a recent version of ESX that supports

    Take a look at this KB for reference VMware KB: the upgrade of a virtual machine to the latest version of hardware

    and you must manually update the vmware_tools after that.

    In addition, vcops internal configs are previously set and tested with the recommended amount of mem/cpu/storage, based on the size of approx.
    throw a bunch of additional vCPUs on this subject maybe, or maybe not, improve the performance of the system.

  • Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

    Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

    I solved the problem, installed the installer from mode Windows safe.

  • Is it possible with the serial number of an Xserve to read the configuration and the year of production?

    Is it possible with the serial number of an Xserve to read the configuration and the year of production?

    This will show you the model and year: https://checkcoverage.apple.com/

    If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)

  • VI Analyzer Questions: Change the default test configuration and screw "Pavilion".

    I have two things I continue to come through in VI Analyzer:

    1. are there in any case to set the default VI Analyzer so that it applies to all projects, I'm working on that?

    I tried to create a task in project A, registration of the configuration and any attempt to open this file in project B, but it says that the file could not be loaded. The reason for my question is that there are a few default options that just add errors that we don't care (e.g. Controls dialog on the façade - 99% of the LabVIEW code that we are working on is called from TestStand as code modules, so the front panel doesn't really count)

    2. can I score / report some screws as 'safe' for parser tests?

    Basically, some screws may fail some perfectly safe way VI Analyzer tests (e.g. non-stanard errors on a 'closing' VI, who doesn't have a case error structure so that the device always gets closed). I wish I had a way to mark the VI kind VI Analyzer would ignore this particular test. This would allow me to have a rule that says something like "before any construction, run the file configuration VI analyzer and make sure there is not error", as opposed to "run VI Analyzer and examine errors, decide whether or not they are important for the VI in question..." ». An extension to this question would be how do I perform a task VI Analyzer before building when the VI Analyzer screw do not accept files cfg for project based tasks.

    Any help would be greately appreciated!

    Thank you

    Shaun

    1. a project oriented .cfg file cannot be transferred between projects.  Could you possibly create a .cfg unrelated to the project file (under the option 'Start a new task' on the first page of the VI Analyzer) and use it?  He would have no file in the list, but it would have all of the configured tests as you want.  And you could start with this on your different projects .cfg file... you would just add screws based on file (on page 2 of the VI Analyzer), rather than have all come to you in a .cfg project-based.

    2. on page 4 VI Analyzer, you can exclude certain tests to run on some screws and save these settings in a .cfg.  This option is also exposed in the VI Analyzer API with VIAn exclude the VI.vi Tests.

  • I went to my sounds in my Panel configuration and then sounds and when he gave me the error "%SystemRoot%\media\Windows XP erreur.wav.

    original title: %SystemRoot%\media\Windows XP erreur.wav

    Hello
    When I arrived today at my computer, I noticed that I couldn't hear a sound. So I checked my speakers then I checked to see if she was silent, I then checked to see if my strings have been properly fixed. Everything is as it should be. I went to my sounds in my Panel configuration and then sounds and when he gave me the error "%SystemRoot%\media\Windows XP erreur.wav.

    Can you help me?

    Maria Romero

    Hello

    1. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps from the link below and check if it helps.

    No sound in Windows:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Hope this information is useful.

  • "Windows updates were not be properly configured and restoration of changes." The computer freeze

    I have a laptop Dell inspiron 1501 with windows vista on it.

    I don't have the disc of windows Vista DVD you are referring to, I have never recived a Dell I bought the computer on the internet with vista already installed.

    My problem is that, with respect to the windows updates, I get a message saying "Windows have been developed to date not be properly configured and restoration of changes". I have 51 updates pending, 47 of these updates is equivalent to 170 MB.

    As a result of these updates, I think it's the cause of my freezing computer once I have connected and I have to restart only having do not 2 - 3 times.

    When the computer "freezes" the cursor does not move throughout the scene, none of the keys works, including Manager tasks etc., the only thing that works is to turn the computer off. Sometimes, there is a beep, beep once the computer crashes.

    Over 95% the updates I have try have 'no '.

    I'm lost as how to how to repair?

    All good suggestions welcome to solve this problem, the simpler the better... I don't want to have to buy a new computer... If I won't Dell... and I'll have to get the windows disc... most solutions here seem to require it...

    Hi AL0001,

    Run the chkdsk command to check that there are no problems with your hard drive. To run the disk check, follow these steps:

    1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
    2. Select Mode safe mode with command prompt.
    3. At the command prompt, type chkdsk/r (there is a space between the k and /)

    Meanwhile, check the Dell website to see how you can get a recovery disk in case you need to recover Windows.

  • Options has dissappeared form my top bar (the classic theme configuration) and with it, spell checker and al.

    Options has dissappeared since my top bar (the classic theme configuration) and with it, spell checker and al., search help find nothing useful, as usual. Am I the only one wondering how to access functions to be included under Options?

    You have solved my problem, and I wanted to thank you again for your help and your patience.

  • My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

    My Windows 7 Pro system has some serious hardware, internet connection and security issues.

    My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

    Original title: upgrade a "Fix" for existing system problems?

    My Windows 7 Pro system has some serious hardware, internet connection and security issues.

    My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

    Hello

    1 re-installing/repairing software will not fix hardware issues.

    2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

    3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    AVG will cause problems with SR too.

    «Temporarily disable AVG»

    http://www.Avg.com/ww-en/FAQ.Num-3857

    2. try to use Safe Mode system restore.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    "Start your computer in safe mode.

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    ____________________________________

    We really need for more details:

    "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

    See you soon.

  • Remove the configuration and reset password on A9K - RSP - 4 G

    We have completed the TURBOBOOT and updated version of the image, but we have to eliminate all the prior configuration and password.

    What is the procedure for that?

    Hello

    Xander and I have implemented this document presenting the different methods of password recovery.

    https://supportforums.Cisco.com/docs/doc-15870

    Let me know if that covers what you need.

    Thank you

    Sam

  • BlackBerry smartphone how to configure and use e-mail without BES

    Hello

    I'm trying to figure How to configure and use e-mail without using a BES.

    I checked with the local telephone company. And the number is not ascociated with any service of BES.

    The entry of services show no indication in this sense.

    In addition, the configuration of SIM card show that everything is disabled. This means that the phone is unlocked. At least that is my understanding.

    However, even after a wipe, the BB device does not set up an e-mail account, as described in the manual. He keeps asking for a BES activation first.

    What will do that disappears?

    And to allow the configuration of the "spam"?

    Just develop the right answer given by JSanders, you can always access your email accounts and social networks (facebook, twitter, google +, etc) on your phone, you will just have no notifications PUSHED to your phone.  You can access the internet on your phone in order to access these accounts, but it should go to them.  With BlackBerry Internet Service activated on your phone account, RIM will push these notifications of new emails, facebook messages, new tweets etc. for your phone.  That's what you'll be missing out on without active BIS.

    I wanted to just make sure that there is no likelihood of confusion.

Maybe you are looking for

  • number format for excel

    Hello My problem is to convert my numbers into a format correct excel. numbers are saved in a spreadsheet and with a Publisher file, it looks like this: 9, 723197E + 0 8, 229011E-1 When I filled out an Excel file with the data, it looks like: 9723,00

  • Unable to access the hidden administrator account to install programs

    original title: passwords and security Uncle installation the computer for us and put a lot of security, now the anti-virus is out of stock and we cannot install anything because admin settings, the admin account is also hidden but tried to reappear

  • I lost my internet ion in the toolbar

    I lost my internet ion in the toolbar. How can I get that back on the toolbar. It is the ion that shows if you connected at the local level and, or through the internet. He was here for a few days. All is well with the internet. just no ion in the to

  • OPU Test doesn't have a DVD - RW drive: HL-DT-ST DVD +-RW GT32N

    It's been a while since my dvd - rw drive stoped to function as it was supposed to. I never thought about it until today.So, I did the test and it says "Test of OPU - failed". What it means? I put something in the drive, it goes on and then my pc say

  • Agent query CVP/UCCE 10.5 Whisper - Whisper quick read failed

    Hello Cisco community support, We are currently experiencing problems with Agent Whisper, it's something we want to implement. At present when us dial in a script we headed over to the agent without a prompt whispers playing, we followed the official