C309a: HP driver update for HP Photosmart C309a series

When you perform the update of windows, I have continual wants updaet HP driver for HP Photosmart C309a series.  He did the update, and then wants to do it again the next time Windows Update is run.  If I look at the history of Windows update, it is many, many times.  The screen "View installed updates" Control Panel does not, however.  Microsoft says that it is a problem of HP.

Help!

Thank you

Wayne

Hello @Wayne0825,

Tags: HP Printers

Similar Questions

  • 14 - n204sf Pavilion: Pavilion 14-204sf has an AMD graphics card but driver update for a nVidia

    Hi, in my attempts to find a solution to my problem with the current for my Pavilion 14-n204sf graphics driver, I found on the web from the list of available drivers HP site in which the graphics driver is a Nvidia card in the machine is an AMD Radeon 8670 M as shown in the master database and reported in the control panel of the machine. What is the reason for this discrepancy? Do both adapters use the same driver or is this just a mistake - and in this case, where is the Radeon driver?

    Thanks in advance for your help.

    Hi @jlb21,

    Thank you for your inquiry.

    I understand that you upgraded your system to Windows 10 now looking a driver updated for the AMD Radeon 8670 M and there is not a list on the page of software and the driver for your model.

    If this does not work, you can try to install a driver on the AMD website, but can find that you do not get the same options as before.

    Drivers + download - drivers & Support AMD Center

    You may consider contacting HP support for assistance or perform recovery to factory.

    HP computers - performing a recovery of HP (Windows 8) system

    If you decide that option and that you don't create recovery media, you can get a kit of HP support recovery.

    Contact HP to Contact HP Support assistance

  • F5521gw Driver Update for T420s in accordance with the T430 systems...

    Hi guys,.

    You have pushed out a 7.1.1.0 update driver for the F5521gw card for the T430 but have not updated the T420 systems for the same card.

    Pilots of the T430 works on my T420s so out of curiosity, why isn't he there had an update for us guys?

    Be nice to think we were not left behind, we are not yet barely a generation old yet!

    DangerMouse,

    Unless the updated driver will be fixing some bugs or improved then the development team will not release the update that the team would be more focused in the fixing of the drivers or software with bugs.

    Thank you for taking the time to install the 7.1.1.0 and the display back. So for those who want to try the 7.1.1.0 pilot on their T420s or T420 with Ericsson card, they can do so, however, it's at their peril to is not in the list of compatibility of Lenovo.

    Thank you

  • Windows Update wants to make a driver update for my wireless 1505 dell minimap

    I have a dell inspiron 1720 with a dell 1505 wireless Mini PCI card.
    I've used rc1 Win7 32bits almost since release and had the same problem but blamed the rc1 status.

    I recently installed win7 ult 64 bit and the initial drivers automatically install for this card (version 4.176.75.21) released on 10/01/2008 work very well and I can connect to my router N to 270 MB/s.

    However, Windows Update wants to update the drivers of 5.30.21.0
    on this operation, it limits the connection to 54 Mbps

    After speaking with the support of dells, they claim that the 5.30.21.0 drivers are not intended for the mini-map 1505

    restore drivers allows me to connect again to 270 MB/s

    I'm pretty happy with it except for 2 things.

    1. I fear that other people with the same card be the victim of a bad update from microsoft.

    2 and my main concern is that I had a very hard to solve the problem with the 4.176.75.21 drivers when using the win7 RC 1.  My computer when making fashion 'sleep' declares that he is not stopped correctly and he was attributed to incorrect wifi drivers.

    It is extremely difficult to solve because it is not all the time.

    I'm just the eccentric? I have hard to find someone else with the same question. but that could come from several different reasons.

    any help would be appreciated.

    Live and learn. Experienced users only get updated driver required/need to download pages for the device manufacturer or the computer, never update Windows.

    To avoid the download and/or installation of driver updates, you need to configure automatic updates to the updates but let me choose whether to download and install them . If & when there is an update, you don't want to download/install, disable the update then "hide".

    See http://windows.microsoft.com/en-us/windows7/Change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How can I find and download a driver for hp photosmart c4600 series?

    connecting a printer to my computer and the need for internet downloads because I don't have the cd

    The HP Support site has pilot full support for the XP operating system and the printer Photosmart C4600 series. Here are a few links to specific models using Windows Xp 32-bit:

    Range of all-in-one printers, HP Photosmart C4640
    Range of all-in-one printers, HP Photosmart C4650

    HP Photosmart C4680 all-in-One Printer

    Be sure to get the correct driver for your 32-bit edition or 64-bit of Windows XP.

    Additional compatibility information for 64-bit XP systems can be found here: Windows XP Professional x 64 Edition solution Center

  • Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

    Hello

    The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

    Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

    Windows Vista/Win7 32-bit driver v15.49

    Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

    Driver Ethernet (v73.14 +) WHQL

    (V73.16) network management tools "Sedona".

    SATAIDE (v11.1.0.33) WHQL driver

    SATARAID Driver (v11.1.0.33) WHQL

    Application RAIDTOOL (v11.1.0.30)

    SMBUS (v4.74) WHQL driver

    SMU (v1.71) WHQL driver

    GPU (v190.38) WHQL driver

    PhysX (v9.09.0428)

    Away Mode Driver (v6.0.6000.114) WHQL

    Installer (v7.57)

  • What is the most recent NVIDIA graphics driver update for 32-bit windows vitsa specifications

    I looked on the site of NVIDIA and Geforce I can't get the graphics driver for my compaq cq50 computer I'm right now 8200M graphics drive but I can't find an update for it that will support my OEM. Is could someone please help me update my portable computers graphics driver?

    ...

    nVidia <> Microsoft.

    I guess what you're saying, is that you have Windows Vista 32 - bit and a video chipset from nVidia GeForce 8200 M.  I guess you went to nVidia and their utility to scan to see if you have the latest driver graphics driver?

    What he have to note you (if it is authorized on computer laptop yor by OEM) is:

    Verde 285.62 pilot

    Version: 285.62 - WHQL
    Release date: Monday 24 October 2011
    Operating system: Windows 7 32-bit, Windows Vista 32-bit
    Language: English (United States)
    File size: 150,63 MB

    You could try to remove the currently installed driver and before rebooting, install the one linked above.

  • more recent good video driver updates for M4600 with ATI M5950 video card

    My hard drive has failed recently and I had to reinstall from scratch. I used it for a few months now without other problems.

    Currently, I am having a problem where a program (formZ) modeling in 3d displays wired but no polys in its modes of rendering opengl. I had this problem in July 2014 and it is resolved by updating my drivers which was available on the website of dell at this time. I have also some odd polys displaced and shadow flicker in sketchup which I didn't have before.

    According to me, it's my drivers, but the most recent driver available for the m5950 on the m4600 has 'changed' in October 2013 and when I install it, the problem is not resolved.

    Someone at - it a newer driver that 8.850.7.8000 (as of 12/19/2011)?

    Well yes that suits him.

    Although not quite, the link that you sent me was for certifications of driver for specific programs and some video cards, not including mine. However, I could find what I needed on the site of AMD:

    http://support.AMD.com/en-us/KB-articles/pages/workstation-graphics-drivers.aspx

  • Reference Dell touchpad driver updated for Windows 10 new gesture

    Hello

    A new major upgrade for Windows 10 has been released a few days ago, and the update included a new gesture that allow the user to pass the workstations with 4 fingers on the touchpad and slide between the left or right to switch workstations.

    This new gesture does not work on my touchpad and I guess this can refer to the current version of the touchpad driver is not yet supported in this function because other gestures as three finger swipe to move all open windows and three finger tap to call Cortana are always works well for me.

    I was wondering if there is no update for the driver for the touchpad to soon, or all those were just my own question...

    Thank you!

    CALVINLAU0914,

    Can you give us the model of the computer you have so that I can look for drivers?

  • replacement for hp photosmart product series home photo Center

    I'm know what product # or name replacement for HP Photosmart A820 Home Photo Center series Q8550A. Really not sure if HP doing any type of replacement product or not

    THX HevnLghHP,

    Discovered that HP has dropped this product without any type of replacement.  They don't have even as a spare part in PartSurfer... guess I'm out of luck.

  • Driver update for Satellite 5100 503 with NVIDIA geforce4 440 Go

    Hello there,
    It is a German call...
    I need an update of the graphics driver to a computer laptop toshiba satellite 5100 503, the nvidia geforce4 440 Go, that you can't get on the nvidia site, where have no mobile system to get.
    My laptop is quite slow. I want just to speed up its performance.
    Thank you outthere

    This old laptop model is certainly not longer supported and you do not find an update on the Toshiba support page. What you can do is to look around to find the laptop with the same graphics card, but maybe with newer driver and try to install it.

    Can you please tell us why you need more graphics performance? For games?

  • Intel Rapid Storage Technology driver update for HP ENVY Phoenix 810-135qe desktop

    Hello

    I recently bought a HP ENVY Phoenix 810-135qe desktop computer, during a performance of the construction in the auditor of updates to HP program that it is announcing the following update available for my machine and I was wondering if there were more details about what he actually did and/or updates/patches?

    Intel Rapid Storage Technology driver

    Description
    This package provides the driver for Intel Chipset SATA RAID solutions and SATA AHCI Controller in models supported that are running a supported operating system.

    Communicate details
    Exit the: 2014-01-23
    File name:sp65114.exe [1/1, 17.92 M]
    A Version12.8.2.1000 Rev.
    Compatibility:
    Microsoft Windows 7 (64-bit)

    Fix/development
    -Provides original drivers

    As you can see the description of correction and improvement really provided no details as to what is fixed or improved.

    If I need to apply this patch, it would be nice to understand a little better what to expect and what is fixed and/or improvements.  You have to forgive me because I'm old school and I usually generally follow the routine "if it ain't broke don't fix it".  I'll do what it takes well so I have a better understanding of what is going to happen in the case where updating mess something inadvertently.

    Thank you

    JCOOPER2

    Hello:

    What is the technology Intel Rapid Storage Technology software.

    http://www.Intel.com/support/chipsets/IMSM/sb/CS-020784.htm

    It is not necessary to install the update if you do not want.

    I doubt you will notice a difference in performance if you have it installed.

    It is unlikely that all the problems would result in the update (however could apply Murphy's law), but like you said... "If it ain't broke, don't fix it."

  • Looking for a NVIDIA nForce Serial ATA Controller Driver Update for HP Pavilion Elite e9140f

    Hi, I added a second hardrive that is 3 TB and my desktop is running windows 7 with SP 1.  I have been informed by Acronis technical support I need to get an NVIDIA nForce Serial ATA Controller update (I have version

    NVIDIA nForce Serial ATA Controller version 11.1.0.29 installed).  Can someone tell me what version I need update too and where to download?  Thank you!  Mark

    The last driver from Chipset from nVidia for your computer is located on the nForce Chipset Driver Version 15.56 download page. This driver install NVIDIA nForce Serial ATA Controller driver v11.1.0.43. This driver, however, isn't likely to solve your problem.

    You will need to check that the hard drive is seen in BIOS until the computer will recognize the drive. You will need to run the Windows 'Disk management' console to partition the hard drive in at least two partitions, MBR or GPT partition before you can use the drive.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • driver of scanner/update for Sony VPCM11M1E/B and USB driver updates for a computer laptop Packard Easynote TS

    I get a scanner driver that pop up in the corner of my screen Sony I can't remove it by deleting using the control/alt someone advise or help please.

    Also, I get a message on my laptop HP Easynote TS my Bus driver series universal needs to renewal/update, the driver seems to have disappeared?
    Thank you
    Silent pensioner

    Hi Ian,

    I appreciate the efforts that you put to publish the query on this forum.

    Please help me with the following information about the issue:

    (1) you receive the notification/pop up in the taskbar?

    (2) when you receive these pop-ups? This is when using the device?

    (3) do you find problems when you use the scanner device or USB on laptop computer Sony or HP Easynote laptop devices respectively?

    (4) have you tried to install updates of the notification?

    (5) where have you checked the status of the driver for the USB controllers? Is it under Device Manager? +

    I suggest you to check the status of the driver for the device in Device Manager. Check out the link to do so:

    http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

    This could be related to updates driver from the manufacturer, on their respective Web sites.

    I suggest you to try updating the driver for the scanner and USB controllers and check if it helps.

    You can visit the following links to download and then install the required drivers:

    Sony Web site:

    http://www.Sony.co.UK/support/en/product/VPCM11M1E_B/updates

    Packard Easynote story:

    http://www.PackardBell.co.UK/PB/en/GB/content/download

    After installing the drivers, check if you get the same notification.

    Please let us know about the results. We will be happy to help you.

  • HP pavilion dv7-6c80eo, no graphics driver updated for 2011?

    Hello, I wonder if it is really true that there has been no update on the graphics driver for this pc 2011 on hp taking over the site. I am not able to update via the website of amd because it indicates that the driver is not compatible with my pc hardware, so it sucks really bad...

    Say it's a bit much, considering that there are Windows 8 AMD and Intel graphics drivers available for download which bear a date of 2012.  There is a portable to many manufacturers who do not even have the graphic drivers for Windows 8. Your the fact.

Maybe you are looking for

  • lost phone

    I lost my iphone, now I want on my phone so no one can use the blacklist.

  • 'Artist' in the sidebar tab: Albums appears do not?

    OK people, This can be a bit on the side KNOCK, but thought that I ask anyway. When you go to the "artist" in the sidebar, below each artist, you get a few short texts like "10 songs, 2 Albums". I noticed that some artists list only say "2 songs" How

  • PSC disconnected in MAX but meets the UDP broadcasts

    Hey guys,. I have 4 controllers of PCP in the control of a whole bunch of sensors on the ground. Each sensor has its own calibration, and so I built an OO hierarchy based on dynamic distribution to cope. Now, there is a piece of generic software and

  • GPIB-USB-HS shows no MAX after that I used the wizard NI VISA DRIVER

    I accessed GPIB USB HS in the MAX software. As I was not able to communicate NF RLC remotely, so I tried Wizard DRIVER VISA OR according to tutorial Assistant pilot NI VISA , however, thnings went wrong and I am not able to see same GPIB to the MAX s

  • Operate devices cDAQ in Labview 8.0

    Can you run cDAQ features in Labview 8.0 using the latest version of DAQmx Labview 8.0-supported? I bought a cDAQ-9174 and some modules, but the included driver disk (DAQmx 9.5) is not supported in 8.0 LV. Is it possible to install drivers without in