C40 Camera control maximum length of cable RJ45 to d - SUB

Hello

What is the maximum cable length for the control of camera on a Cisco C40 port?

Thank you

Kyle

According to the PrecisionHDMC camera Guide, page 17, the camera cables that usually come with codecs can be 5, 6.5, or up to 20 meters.  Anything more than 5 meters requires the camera powered by the power of the camera and not the codec using the camera control cable itself.

I have a few installs custom where the camera control cable is well up to 75-100 feet.  Just follow the outputs pins on the same page as above to make your own cable and don't forget to use the POWER-CAM-V = power supply to power the device.

Tags: Cisco Support

Similar Questions

  • Maximum length of a clip transfer?

    I plan to transfer more than 3 dozen mini DV tapes on a hard drive through import Final Cut media.

    Since I'm not still on the creation of projects, I wonder if there is a maximum length of time that can be transferred as a single item - bottom line: can't I just let go a full 60 minute miniDV Tape for transfer and wait until later, to work from that single clip 60 (Cup/culture/Edition of him)? The idea behind my question, of course, is that I don't want to sit for 36 hours...)

    Anyone ever done this?

    Thank you

    That is a good question. Many users have reported problems with the capture of band through FCP import feature x. My experience has been very good - via a camera or an IO device... but I have met occasionally capture fragmented clip - sometimes as short as less than a second clips - which is tedious to deal with. My suggestion: some test clips. If they capture well, great. If not, cancel and use QuickTime Player to capture.

    Post back and tell us how you did it.

    Russ

  • What is the length of cable max mini display port HDMI

    What is the maximum length of MiniDP to HDMI cable without loss of video signal?

    Jim

    Mini Display port, length max HDMI?

    http://www.PopularMechanics.com/home/how-to/a6751/how-to-extend-your-HDMI-cables /.

    http://forums.MacRumors.com/threads/long-mini-DisplayPort-cables.1178231/

    http://superuser.com/questions/451126/mini-DisplayPort-cable-Max-length

    It seems that it is very dependent on the quality of the cable and the resoloution

  • When loading, error: field in the data file exceeds the maximum length

    Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    PL/SQL Release 11.2.0.3.0 - Production

    CORE Production 11.2.0.3.0

    AMT for Solaris: 11.2.0.3.0 - Production Version

    NLSRTL Version 11.2.0.3.0 - Production

    I am trying to load a table, small size (110 lines, 6 columns).  One of the columns, called NOTES is less error when I run the load.  That is to say that the size of the column exceeds the limit max.  As you can see here, the column of the table is equal to 4000 bytes)

    CREATE TABLE NRIS. NRN_REPORT_NOTES

    (

    Sys_guid() NOTES_CN VARCHAR2 (40 BYTE) DEFAULT is NOT NULL.

    REPORT_GROUP VARCHAR2 (100 BYTE) NOT NULL,

    POSTCODE VARCHAR2 (50 BYTE) NOT NULL,

    ROUND NUMBER (3) NOT NULL,

    VARCHAR2 (4000 BYTE) NOTES,

    LAST_UPDATE TIMESTAMP (6) WITH ZONE SCHEDULE systimestamp NOT NULL default

    )

    TABLESPACE USERS

    RESULT_CACHE (DEFAULT MODE)

    PCTUSED 0

    PCTFREE 10

    INITRANS 1

    MAXTRANS 255

    STORAGE)

    80K INITIAL

    ACCORDING TO 1 M

    MINEXTENTS 1

    MAXEXTENTS UNLIMITED

    PCTINCREASE 0

    DEFAULT USER_TABLES

    DEFAULT FLASH_CACHE

    DEFAULT CELL_FLASH_CACHE

    )

    LOGGING

    NOCOMPRESS

    NOCACHE

    NOPARALLEL

    MONITORING;

    I did a little investigating, and it does not match.

    When I run

    Select max (lengthb (notes)) in NRIS. NRN_REPORT_NOTES

    I got a return of

    643

    .

    Which tells me that the larger size of this column is only 643 bytes.  But EACH insert is a failure.

    Here is the header of the file loader and first couple of inserts:

    DOWNLOAD THE DATA

    INFILE *.

    BADFILE '. / NRIS. NRN_REPORT_NOTES. BAD'

    DISCARDFILE '. / NRIS. NRN_REPORT_NOTES. DSC"

    ADD IN THE NRIS TABLE. NRN_REPORT_NOTES

    Fields ended by '; '. Eventually framed by ' |'

    (

    NOTES_CN,

    REPORT_GROUP,

    Zip code

    ALL ABOUT NULLIF (R = 'NULL'),

    NOTES,

    LAST_UPDATE TIMESTAMP WITH TIME ZONE ' MM/DD/YYYY HH24:MI:SS. FF9 TZR' NULLIF (LAST_UPDATE = 'NULL')

    )

    BEGINDATA

    | E2ACF256F01F46A7E0440003BA0F14C2; | | DEMOGRAPHIC DATA |; A01003; | 3 ; | demographic results show that 46% of visits are made by women.  Among racial and ethnic minorities, the most often encountered are native American (4%) and Hispanic / Latino (2%).  The breakdown by age shows that the Bitterroot has a relatively low of children under 16 (14%) proportion in the population of visit.  People over 60 represent about 22% of visits.   Most of the visitation comes from the region.  More than 85% of the visits come from people who live within 50 miles. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    | E2ACF256F02046A7E0440003BA0F14C2; | | DESCRIPTION OF THE VISIT; | | A01003; | 3 ; | most visits to the Bitterroot are relatively short.  More than half of the visits last less than 3 hours.  The median duration of visiting sites for the night is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of these visits are shorter than the duration of 3 hours.   Most of the visits come from people who are frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times a year.  Another 8% of visits from people who say they visit more than 100 times a year. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    | E2ACF256F02146A7E0440003BA0F14C2; | | ACTIVITIES |. A01003; | 3 ; | most often reported the main activity is hiking (42%), followed by alpine skiing (12%) and hunting (8%).  More than half of the report visits participating in the relaxation and the display landscape. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    Here's the full start of log loader, ending after the return of the first row.  (They ALL say the same error)

    SQL * Loader: Release 10.2.0.4.0 - Production Thu Aug 22 12:09:07 2013

    Copyright (c) 1982, 2007, Oracle.  All rights reserved.

    Control file: NRIS. NRN_REPORT_NOTES. CTL

    Data file: NRIS. NRN_REPORT_NOTES. CTL

    Bad File:. / NRIS. NRN_REPORT_NOTES. BAD

    Discard File:. / NRIS. NRN_REPORT_NOTES. DSC

    (Allow all releases)

    Number of loading: ALL

    Number of jump: 0

    Authorized errors: 50

    Link table: 64 lines, maximum of 256000 bytes

    Continuation of the debate: none is specified

    Path used: classics

    NRIS table. NRN_REPORT_NOTES, loaded from every logical record.

    Insert the option in effect for this table: APPEND

    Column Position Len term Encl. Datatype name

    ------------------------------ ---------- ----- ---- ---- ---------------------

    FIRST NOTES_CN *;  O (|) CHARACTER

    REPORT_GROUP NEXT *;  O (|) CHARACTER

    AREA CODE FOLLOWING *;  O (|) CHARACTER

    ROUND                                NEXT     *   ;  O (|) CHARACTER

    NULL if r = 0X4e554c4c ('NULL' character)

    NOTES                                NEXT     *   ;  O (|) CHARACTER

    LAST_UPDATE NEXT *;  O (|) DATETIME MM/DD/YYYY HH24:MI:SS. FF9 TZR

    NULL if LAST_UPDATE = 0X4e554c4c ('NULL' character)

    Sheet 1: Rejected - error in NRIS table. NRN_REPORT_NOTES, information ABOUT the column.

    Field in the data file exceeds the maximum length.

    I don't see why this should be failed.

    Hello

    the problem is bounded by default, char (255) data... Very useful, I know...

    you need two, IE sqlldr Hat data is longer than this.

    so change notes to notes char (4000) you control file and it should work.

    see you soon,

    Harry

  • sqlldr question: field in the data file exceeds the maximum length

    Hello friends,

    I am struggling with a load of simple data using sqlldr and hoping someone can guide me.

    Ref: I use Oracle 11.2 on Linux 5.7.
    ===========================
    Here is my table:
    SQL> desc ntwkrep.CARD
 Name                                                              Null?    Type
 ----------------------------------------------------------------- -------- ------------------
 CIM_DESCRIPTION                                                            VARCHAR2(255)
 CIM_NAME                                                          NOT NULL VARCHAR2(255)
 COMPOSEDOF                                                                 VARCHAR2(4000)
 DESCRIPTION                                                                VARCHAR2(4000)
 DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
 LOCATION                                                                   VARCHAR2(4000)
 PARTOF                                                                     VARCHAR2(255)
 *REALIZES                                                                   VARCHAR2(4000)*
 SERIALNUMBER                                                               VARCHAR2(255)
 SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
 TYPE                                                                       VARCHAR2(255)
 STATUS                                                                     VARCHAR2(255)
 LASTMODIFIED                                                               DATE
    When I try to load a text file data using sqlldr, I get the following errors on some files that do not charge.

    Example:
    =======
    Sheet 1: Rejected - error on the NTWKREP table. CARD, column REALIZES.
    Field in the data file exceeds the maximum length

    Looking at the actual data and count the characters for the data of the "CONSCIOUS" column, I see that it is basically a little more of 1000 characters.

    So try various ideas to solve the problem, I tried to change to "tank" nls_length_semantics and re-create the table, but this does not always helped and always got the same errors of loading data on the same lines.


    Then, I changed back to byte nls_length_semantics and recreated the table again.
    This time, I have changed the table manually as:
    SQL> ALTER TABLE ntwkrep.CARD MODIFY (REALIZES VARCHAR2(4000 char));

Table altered.

SQL> desc ntwkrep.card
 Name                                                              Null?    Type
 ----------------------------------------------------------------- -------- --------------------------------------------
 CIM_DESCRIPTION                                                            VARCHAR2(255)
 CIM_NAME                                                          NOT NULL VARCHAR2(255)
 COMPOSEDOF                                                                 VARCHAR2(4000)
 DESCRIPTION                                                                VARCHAR2(4000)
 DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
 LOCATION                                                                   VARCHAR2(4000)
 PARTOF                                                                     VARCHAR2(255)
 REALIZES                                                                   VARCHAR2(4000 CHAR)
 SERIALNUMBER                                                               VARCHAR2(255)
 SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
 TYPE                                                                       VARCHAR2(255)
 STATUS                                                                     VARCHAR2(255)
 LASTMODIFIED                                                               DATE
    Yet once, loading data failed with the same error on the same lines.

    So, this time, I thought that I would try to change the data type of column in a clob (navigation), and again, it is still impossible to load on the same lines.
    SQL> desc ntwkrep.CARD
 Name                                                              Null?    Type
 ----------------------------------------------------------------- -------- -----------------------
 CIM_DESCRIPTION                                                            VARCHAR2(255)
 CIM_NAME                                                          NOT NULL VARCHAR2(255)
 COMPOSEDOF                                                                 VARCHAR2(4000)
 DESCRIPTION                                                                VARCHAR2(4000)
 DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
 LOCATION                                                                   VARCHAR2(4000)
 PARTOF                                                                     VARCHAR2(255)
 REALIZES                                                                   CLOB
 SERIALNUMBER                                                               VARCHAR2(255)
 SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
 TYPE                                                                       VARCHAR2(255)
 STATUS                                                                     VARCHAR2(255)
 LASTMODIFIED                                                               DATE
    Any ideas?

    Here's a copy of the first line of data that fails to load each time any how to change the column 'TRUE' in the table.
    other(1)`CARD-mes-fhnb-bldg-137/1`  `other(1)`CARD-mes-fhnb-bldg-137/1 [other(1)]`HwVersion:C0|SwVersion:12.2(40)SE|Serial#:FOC1302U2S6|` Chassis::CHASSIS-mes-fhnb-bldg-137, Switch::mes-fhnb-bldg-137 ` Port::PORT-mes-fhnb-bldg-137/1.23, Port::PORT-mes-fhnb-bldg-137/1.21, Port::PORT-mes-fhnb-bldg-137/1.5, Port::PORT-mes-fhnb-bldg-137/1.7, Port::PORT-mes-fhnb-bldg-137/1.14, Port::PORT-mes-fhnb-bldg-137/1.12, Port::PORT-mes-fhnb-bldg-137/1.6, Port::PORT-mes-fhnb-bldg-137/1.4, Port::PORT-mes-fhnb-bldg-137/1.20, Port::PORT-mes-fhnb-bldg-137/1.22, Port::PORT-mes-fhnb-bldg-137/1.15, Port::PORT-mes-fhnb-bldg-137/1.13, Port::PORT-mes-fhnb-bldg-137/1.18, Port::PORT-mes-fhnb-bldg-137/1.24, Port::PORT-mes-fhnb-bldg-137/1.26, Port::PORT-mes-fhnb-bldg-137/1.17, Port::PORT-mes-fhnb-bldg-137/1.11, Port::PORT-mes-fhnb-bldg-137/1.2, Port::PORT-mes-fhnb-bldg-137/1.8, Port::PORT-mes-fhnb-bldg-137/1.10, Port::PORT-mes-fhnb-bldg-137/1.16, Port::PORT-mes-fhnb-bldg-137/1.9, Port::PORT-mes-fhnb-bldg-137/1.3, Port::PORT-mes-fhnb-bldg-137/1.1, Port::PORT-mes-fhnb-bldg-137/1.19, Port::PORT-mes-fhnb-bldg-137/1.25 `Serial#:FOC1302U2S6`mes-fhnb-bldg-137`other(1)
    Finally, for reference, here's the controlfile I use.
    load data
infile '/opt/EMC/data/out/Card.txt'
badfile '/dbadmin/data_loads/logs/Card.bad'
append
into table ntwkrep.CARD
fields terminated by "`"
TRAILING NULLCOLS
(
CIM_DESCRIPTION,
CIM_NAME,
COMPOSEDOF,
DESCRIPTION,
DISPLAYNAME,
LOCATION,
PARTOF,
REALIZES,
SERIALNUMBER,
SYSTEMNAME,
TYPE,
STATUS,
LASTMODIFIED "sysdate"
)

    The default data in sqlldr type is char (255)

    Modify your control file following which I think should work with VARCHAR2 (4000) REALIZES:

    COMPOSEDOF char(4000),
DESCRIPTION char(4000),
LOCATION char(4000),
REALIZES char(4000),

  • sqlldr - fill columns exceeds the maximum length

    Hi all

    DB version: 10.2.0.1.0

    We get a CSV file with 127 fields. We need to load the first 9 fields and the 127th field using SQLLDR. What is the best way to specify it in the control file?

    Currently, we give as
       ...
   ...
   C10 filler,
   C11 filler,
   ...
   C127 filler,
   column_name
  
    1. is there another available plu approach?
    2. we are inheritance issues when filling columns exceeds the maximum length. We tried to give as
                  c10 char(4000) filler  ,
  
    But it gives a syntax error. What is the work around that?

    Thanks in advance,
    Jac

    Please note that the help of EXTERNAL TABLEs or other methods is not possible for us.

    Hi JAC,

    Have you tried

    c10 filler char(4000)

    documentation

    A filler field syntax is identical to that of a column in the field, except that the name of the field to a filling is followed by FILLING.

    Best regards
    Peter

  • Field in the data file exceeds the maximum length

    Dear all,

    I'm trying to download data in a table using SQLLDR, the data field in TAR_BAD_RSN and PCL_ADD1 columns do not have more than 4,000 characters. I pasted the file desc and control table which I use. Pls help me on what I get an error msg like field in the data file exceeds the maximum length for TAR_BAD_RSN and PCL_ADD1
    :> desc dedup_target_upload_new


Name                                      Null?    Type
----------------------------------------- -------- ----------------------------
PPL_CON_ID                                         VARCHAR2(20)
PPL_CON_NO                                         VARCHAR2(20)
TAR_DIV                                            VARCHAR2(10)
TAR_MODEL                                          VARCHAR2(50)
PPL_BOOKED_DT                                      VARCHAR2(20)
PCL_FIRST_NAME                                     VARCHAR2(100)
PCL_MIDDLE_NAME                                    VARCHAR2(100)
PCL_LAST_NAME                                      VARCHAR2(100)
PPL_IBC_CODE                                       VARCHAR2(100)
PPL_DLR_CODE                                       VARCHAR2(100)
INV_CHAS_NO                                        VARCHAR2(20)
INV_ENG_NO                                         VARCHAR2(20)
PCL_MOB_NO                                         VARCHAR2(300)
PCL_PH_NO                                          VARCHAR2(300)
RC_NO                                              VARCHAR2(25)
PPL_STS                                            VARCHAR2(300)
PCL_ADD1                                           VARCHAR2(300)
PCL_ADD2                                           VARCHAR2(300)
PCL_ADD3                                           VARCHAR2(300)
PCL_CITY                                           VARCHAR2(50)
PCL_PINCODE                                        VARCHAR2(10)
FLAG                                               VARCHAR2(10)
ID_DRIVING_LIC                                     VARCHAR2(40)
ID_ELECTION_CARD                                   VARCHAR2(40)
ID_PAN_CARD                                        VARCHAR2(40)
ID_PASSPORT                                        VARCHAR2(40)
BIRTH_DATE                                         VARCHAR2(100)
TAR_PH_1                                           VARCHAR2(50)
TAR_PH_2                                           VARCHAR2(50)
TAR_PH_3                                           VARCHAR2(50)
TAR_PH_4                                           VARCHAR2(50)
TAR_PH_5                                           VARCHAR2(50)
TAR_BAD_RSN                                        VARCHAR2(4000)
TAR_STS                                            VARCHAR2(40)

load data infile 'z:\FILE1.txt' append into table dedup_target_upload_new FIELDS TERMINATED BY "     " 
TRAILING NULLCOLS(
     PPL_CON_ID          "CHAR(4000) TRIM(:PPL_CON_ID)"
,     PPL_CON_NO          "CHAR(4000) TRIM(:PPL_CON_NO)"
,     TAR_DIV          "CHAR(4000) TRIM(:TAR_DIV)"
,     TAR_MODEL          "CHAR(4000) TRIM(:TAR_MODEL)"
,     PPL_BOOKED_DT          "CHAR(4000) TRIM(:PPL_BOOKED_DT)"
,     PCL_FIRST_NAME          "CHAR(4000) TRIM(:PCL_FIRST_NAME)"
,     PCL_MIDDLE_NAME          "CHAR(4000) TRIM(:PCL_MIDDLE_NAME)"
,     PCL_LAST_NAME          "CHAR(4000) TRIM(:PCL_LAST_NAME)"
,     PPL_IBC_CODE          "CHAR(4000) TRIM(:PPL_IBC_CODE)"
,     PPL_DLR_CODE          "CHAR(4000) TRIM(:PPL_DLR_CODE)"
,     INV_CHAS_NO          "CHAR(4000) TRIM(:INV_CHAS_NO)"
,     INV_ENG_NO          "CHAR(4000) TRIM(:INV_ENG_NO)"
,     PCL_MOB_NO          "CHAR(4000) TRIM(:PCL_MOB_NO)"
,     PCL_PH_NO          "CHAR(4000) TRIM(:PCL_PH_NO)"
,     RC_NO          "CHAR(4000) TRIM(:RC_NO)"
,     PPL_STS          "CHAR(4000) TRIM(:PPL_STS)"
,     PCL_ADD1          "CHAR(4000) TRIM(:PCL_ADD1)"
,     PCL_ADD2          "CHAR(4000) TRIM(:PCL_ADD2)"
,     PCL_ADD3          "CHAR(4000) TRIM(:PCL_ADD3)"
,     PCL_CITY          "CHAR(4000) TRIM(:PCL_CITY)"
,     PCL_PINCODE          "CHAR(4000) TRIM(:PCL_PINCODE)"
,     FLAG          "CHAR(4000) TRIM(:FLAG)"
,     ID_DRIVING_LIC          "CHAR(4000) TRIM(:ID_DRIVING_LIC)"
,     ID_ELECTION_CARD          "CHAR(4000) TRIM(:ID_ELECTION_CARD)"
,     ID_PAN_CARD          "CHAR(4000) TRIM(:ID_PAN_CARD)"
,     ID_PASSPORT          "CHAR(4000) TRIM(:ID_PASSPORT)"
,     BIRTH_DATE          "CHAR(4000) TRIM(:BIRTH_DATE)"
,     TAR_PH_1          "CHAR(4000) TRIM(:TAR_PH_1)"
,     TAR_PH_2          "CHAR(4000) TRIM(:TAR_PH_2)"
,     TAR_PH_3          "CHAR(4000) TRIM(:TAR_PH_3)"
,     TAR_PH_4          "CHAR(4000) TRIM(:TAR_PH_4)"
,     TAR_PH_5          "CHAR(4000) TRIM(:TAR_PH_5)"
,     TAR_BAD_RSN          "CHAR(4000) TRIM(:TAR_BAD_RSN)"
,     TAR_STS          "CHAR(4000) TRIM(:TAR_STS)"
)
    Thanks for reading this post
    * 009 *.

    Hello

    Is it possible to deilmit the fields with ' | '? So you don't have to worry about their variable length.

    Just use the completed fields by "|" in the control file.

    Concerning

  • Draw two lines up to the maximum length of photo

    Hello

    The coordinates of the edge detection line is attached. How can I draw these two lines in an imageso line extends and catches up to the maximum length of the image. ? IE first extract the point of intersection of these two lines and look if it is less than the actual length of the image (for example for an image of 1040 X 740, the point of intersection should be behind / less than 1040)

    any ideas?

    Thank you

    I found the extrapolation function... I installed VIPM and installed the MGI package.

  • Maximum length of the SQL command

    I created a MySQL database and a LabView 8.6 application that inserts data into the database using the SQL Toolbox.  I have a problem very long character data insertion in a LONGTEXT field.  I determined that the problem occurs when the SQL command is more than 1 048 574 characters or the length of a particular field exceeds 1 048 326 characters (cannot say who).

    The error I get is "error-2147467259 occurred at NI_Database_API.lvlib:Conn Execute.vi.  "Exception occurred in the Microsoft OLE DB provider for ODBC drivers: [MySQL] [ODBC 5.1 Driver] [mysqld - 5.1.35 - community] MySQL version disappeared in NI_Database_API.lvlib:Conn Execute.vi.

    According to the MYSQL documentation, a LONGTEXT can 4294967295 characters, so length shouldn't be a problem.  The documentation also indicates "the effective maximum length of LONGTEXT columns also depends on the maximum packet size that is configured in the client/server protocol and available memory", but I don't know how to configure the packet size in LabView.

    I enclose the code example that reproduces the problem, although it is based on a special run table structure effectively.  The table definition is included on the diagram.

    This setting must be configured outside of LabVIEW (UDL or DSN).

    You must configure the server and the client:

    I found this link while searching on stackoverflow

    http://dev.MySQL.com/doc/refman/5.1/en/packet-too-large.html

    You may need to select/Configure a specific vendor (different) in order to set this variable.

  • Internet Explorer 8 and cannot run the AXIS ActiveX camera controls in streaming videos

    While I can't verify this with certainty, it seems that since I upgraded to IE 8, I can run no longer videos using the camera AXIS ActiveX controls.  I get the error: "The AXIS ActiveX Camera Control, which allows to display live image streams in Microsoft Internet Explorer, can not be saved on your computer."  I checked under Tools-> Internet Options-> click the Security tab and then activated or has requested to be invited to everything related to the ActiveX and it does not clear the problem.  Oh and I'm running on XP.

    Thank you.

    Hi nbundy,

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP and would be better suited to the XP community. Please visit the link below to find a community that will provide the support you want.

    Forum XP

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro/

    Matt Hudson
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What is the maximum length of bitlocker password

    I can find references technet maximally minimum password length - that is to say 20 characters. I can find no reference to the maximum length of the Bitlocker password

    Hello

    Are you referring to the BitLocker PIN or recovery password?

    Please see the article for more information:

    http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx

  • Call the Manager greeting of maximum length?

    Can someone tell the maximum length of the salutation for a call handler?... Thank you!!

    Hi Jack,

    Check out this thread in January this year which seems exactly answer your question. You'll see that 2 of the answers come from ginger and Jeff who probably are the 2 people that I won't have an answer if I had to ask.

    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=Unified%20Communications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dda2799/0#selected_message

    I hope this helps!

    Rob

    Remember messages useful rate...

  • OGG-00241 error on MyKey3, Keyvalue key name exceeds the maximum length.

    Hello
    I test le GG encryption option.
    My the environment is extract (Windows) et Linux Replicat .
    J’ai set up a key encryptación 256 with KEYGEN utility in ENCKEYS file. Then extract le file I defined the option EncryptTrail Aes256 Mykey3 keyName .
    Le extraction process works well .
    But the process of replication ABEND with this error:
    ERROR OGG -00241 Error on MyKey3 name of the key , keyValue exceed le maximum length .

    I copy the file to server replicat ENCKEYS and located in the GG root directory.
    My version is:

    Oracle GoldenGate for Oracle delivery

    OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1

    Any idea on this issue?

    Thank you very much

    Arturo

    Hola,

    This problem has been resolved by converting the file ENCKEYS of back to the Linux format.

    Thank you

    Arturo

  • adding validation to the maximum length in the rich text editor

    Hi all

    I want to add validation to the maximum length in the rich text editor. How to add that. Help, please

    See this video.

    Validation in RichTextEditor in ADF - YouTube

    and you can also try to hang the function call javascript for events like keyPress, mouse click. Something like:

    

     function doSomething(){ }

  • Field in the data file exceeds the maximum length - CTL file error

    Hello

    I load data into the new system using the CTL file. But I get the error message 'field in the data file exceeds the maximum length "for few records, other records are processed successfully." " I checked the length of the error record in the extracted file, it is less than the length of the target table, VARCHAR2 (2000 bytes). Here is an example of error data,


    Hi Rebecca ~ I just talk to our Finance Department and they agreed that ABC payments can be allocated to the outstanding invoices, you can send all future invoices directly to me so that I could get paid on time. ~ hope it's okay ~ thank you ~ Terry ~.

    This error is caused because of the special characters in the string?

    Here is the ctl file that I use,

    OPTIONS (SKIP = 2)

    DOWNLOAD THE DATA

    CHARACTERSET WE8ISO8859P1

    INFILE '$FILE '.

    ADD

    IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

    WHEN (1)! = 'FOOTER ='

    FIELDS TERMINATED BY ' |'

    SURROUNDED OF POSSIBLY "" "

    TRAILING NULLCOLS)

    < nom_de_colonne >,

    < nom_de_colonne >,

    COMMENTS,

    < nom_de_colonne >,

    < nom_de_colonne >

    )

    Thanks in advance,

    Aditya

    Hello

    I suspect it's because of the construction in default length of character in sqldr data types - char (255) must take no notice of what the definition of the current table is by default.

    Try adding CHAR (2000), to your controlfile so you end up with something like this:

    OPTIONS (SKIP = 2)

    DOWNLOAD THE DATA

    CHARACTERSET WE8ISO8859P1

    INFILE '$FILE '.

    ADD

    IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

    WHEN (1)! = 'FOOTER ='

    FIELDS TERMINATED BY ' |'

    SURROUNDED OF POSSIBLY "" "

    TRAILING NULLCOLS)

    ,

    ,

    COMMENTS TANK (2000).

    ,

    )

    See you soon,.

    Harry

Maybe you are looking for