C4380: Network with C4380 scanning
Hi all
I wonder if the network scanning / remote is possible on a C4380 printer.
It works fine on USB or WiFi as USB scanner and printer connection.
How can I do?
Tags: HP Printers
Similar Questions
-
Extend my extreme network with another extreme - waiting for internet access
Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:
- Changed IPv6 link local parameters
- Tried the whole upward on my Macbook and tried on my iphone
- The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
- Tried to create a network with Extreme2 connected directly to the modem
- Extreme2 factory reset after every attepmt
And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.
Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.
Thanks for any help.
Have you used the Apple Setup Assistant? If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you. All you have to do is enter a name of device for the second AirPort Extreme.
Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.
The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.
Post back if you need some tips on using the "Wizard" for your configuration.
-
Having recently acquired this laptop, I tried to transfer files between it and my desktop (os w2k pro sp4) which is already networked with 2 other computers (ME and 98) in the House. Seems the laptop refuses to cooperate.
I can ping 127.0.0.1, no problem, I can even ping IP of my desktop computer, but the laptop will not ping itself. The same office it detects my home network, but cannot access it. I have a light green and orange when ping of the desktop computer. I installed the latest drivers realtek for local networks (device drivers everything apparently works well)
With the Office when this is the case I could uninstall the internet protocol (TCP/IP) and put things back by reinstalling, in XP this option is grayed out.Any suggestion would be appreciated as I am running out of ideas?
See you soon
Eddie
Hi Eddie
I guess you have a lot of experience with computer networks, and as you can see this sometimes a strange and inexplicable things.
I'm sure that all the settings are good, but you can also try to connect your laptop directly to the desktop (peer to peer). On this way, you can check if it is possible to establish the connection.
-
set up a wireless network with 2 iMacs
How to set up a wireless network with 2 iMacs?
Need more information. Writing an effective communities of Apple Support question.
-
Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption
Hi team,
I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.
I am currently using the adapter network driver atheros 5007 wireless.
Some of the links in your message that resolved this issue earlier are currently unavailable.
It would be great if you could help me to solve this issue.
Concerning
Roger
Here is the patch for WPA2 for XP SP2...
Install and reboot and then see if you're OK...
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974
That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.
-
When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.
Hello
1. which is the version of Windows installed on the computer? For example, Windows 7, Vista
2. only the error message appears only when the Xbox is connected to the computer or at both times?
3. have you made any software or changes to the material on the computer before this problem?
Please answer these questions and provide additional information so that we can better guide you.
-
Dear Sir
Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD IDI am in a field & I'll migrate with a domain name.EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.data servers are also migrating with the new domain.is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.Kind regardsChauvet J.Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
several devices on the network with the same name
I want to install Windows 7 OS computers on a domain with Small Business SERVER 2003. Curiously, I see all the computers on the network, where I should be able to, but one of them WK02011, is not accessible from all Windows 7 systems because there are multiple devices with the same name on the network according to a diagnosticn check. WK02011 is visible and accessible from other systems on the network that are runjning XP OS. There is only one device named WK02011 on the network. I don't have this problem with any other XP system - that is - I can see and access all of the other XP machines on the network with the exception of WK02011. I can't access WK2011 from the server and the server indicates that it is multiple devices with the same ID. Rename the XP would be complicated because of having to re - set up the service to the customer and then turn around and install 7 OS in the workstation in the coming days.
How to find the ghost device double?
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows 7 on TechNet. Please post your question in the Technet forums. You can follow the link to your question:
-
Creation of network with accounts
I want to create a network with computers running Windows operating systems. I have a wiorkgroup. Is it possible to do where I can create user accounts that can be connected through all the computers on the network? In my school, they have where they can disable any account at any time. They have something like shared files, but there are all these files that are not saved on the directory of files shared from any computer.
Hello
Yes, in general a network like what you describe requires a server.
I would say that sticking with the Working Group is your best option to connect two computers to a home network, or more. With a shared folder or two, you should be able to do all the work in network, you will need.
-
I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.
Mike4D
Hello
You can choose one of the following 2 options:
Option 1: simila in the image above
Connect the printer to the router,
Connect a PC to the router (not wireless computer)
Option 2:
Connect a PC to the router (not wireless computer)
Connect the printer to the wireless router
Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.
Please use the following book to configure things
http://h10032.www1.HP.com/CTG/manual/c00389927.PDF
Kind regards.
-
Today morning when I opened my samsung mini, it displays a message that another computer is running on the same network with the same ip address please find a solution for this
In most home networks where multiple devices are connected to a router, router will assign an IP address to each device (via DHCP). This method keeps usually different devices to get the same IP address, but if you restart your router, it will not address remembered that he released before it was restarted. This condition can also occur if you manually assigned an IP address to a device located in the router's DHCP range. If the problem is not due to manually assign an IP address, then this condition will be corrected over time. But if you're in a hurry, you can unplug your router from the wall and stop all computing devices on it. Then plug the router back in and bring up all your devices again one by one.
HTH,
JW
-
Replace a XP computer with another XP computer in a peer-to-peer network with two other computers. became terribly frustrating. I spent a day and a half by train to get there. I know MS wants everyone to buy their new OS, but I can't afford it right now. In the meantime, I'm trying to add a computer to my existing peer-to-peer network. I have never had so much trouble. I can not get computers to eachother Duke on the network.
Over the past 3 years I have implemented each of the existing computers. I'm familiar with the silly quirks of this operating system (i.e. a few hours waiting see if eventually the computers will warm up to each other and decide to play nice together). All computers are able to connect to the internet through the same router connection, and I was able to get each of the computers to see one another, but not all, but none of the computers is to see the new computer. (The new computer is connected to ONE of the other computers, but stopped doing and do again it). Is there a simple step by step to do this? I don't care even if I can't not all computers on the network as a whole, I would like to just the computer I replace to see the computer I replace by in order to obtain the transferred files and get back to work.
I appreciate sincerely ANY help ANYONE can offer.
Hi okcbz,
- How many computers on the network?
I suggest you have a look at the following links in the article:
Introduction to Windows Peer-to-Peer network
How to set up a small network with Windows XP Home Edition (PART 1)
-
I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?
I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.
In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.
Hello
I suggest you to visit these links and check if it helps:
It will be useful.
-
Network says it has detected another computer on the network with my IP address.
Original title: ip addy
My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take
Try restarting your router. It should solve the problem.
-
All of a sudden, impossible to get on the network with PDA
I have an office of cable to a WRT610Nv2 with 2 desktops on the network wireless. I used to be able to jump on and off with my PDA and Netbook... now I can't. PDA reports a 'Yin-Yang' symbol and the symbol of encryption at the network location... I think I somehow locked me out... help please
Chuck
Forgot to mention, basic wired computer and two desktops wireless are still working fine.
Thanks for your reply, but turn the appliance market has not solved the problem... to dig around, I finally found that MAC addresses on my laptop had inadvertently been filtered by software... it sure was not easy to use. I don't know how it happened all of a sudden, but when I "allowed" those blocked from MAC, everything was fine and I was able to get on the network with my PDA.
Kind regards
Chuck, CABGx3 + AAA
-
Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.
Original title: launch of the problems of checkers:
Hello
If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.
Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off
IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
Maybe you are looking for
-
Tecra M3 - touchpad does not work with Windows 7
I have a Tecra M3 I've updgraded to Windows 7. The touchpad does not work.The Web of Toshiba site has a Windows 7 drivers for this model. I tried install the driver of the touchpad and PVAT from the A11 model but still cannot make it work. Can anyone
-
How to reverse the number using labview with given the number and the number of digits? Want to just digital operation only. For example, 56789 will become 98765. TQ.
-
Windows XP does not start, no hard drive error
I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try press
-
There was an update from Microsoft. I use auto update, but I do read everything that is done.
-
Hello I need to convert the GUID on the MBR in win 7 64 bit. I used the cmd and diskpart... and after typing 'convert mbr', I get the message "the operation is not allowed on a disk that contains a pagefile volume." Anyone know how to bypass this? Co