C50-A-19 t satellite fell - warranty does cover this anomaly?

Similar Questions

• Warranty does cover backlight bleeding on Satellite A300-1JH

  Hello.

  I would like to know if backlight bleeding to a laptop (it of bad enough, nearly half of the screen is gray instead of black) can be solved with warranty. They change the display or give me a new model? Or are they taking action at all?

  I can always return the laptop that 10 days have not passed since I bought it, but I want to keep it if they can change the display. In it's current condition, it is unusable on a long term.

  First, you will need to contact the ASP in your country and the ASP technician must check the display / laptop if there is really a bad screen work.

  But listen mate...
  I read in other forums on the display of the symptoms that you describe in your ad and something like which is also visible on LCD TV s and to be honest, it s not a malfunction. They are simply properties of LCD.

  However, you can contact the ASP and the technician could provide more details on this symptom

  Good bye

• Satellite Pro A200 does not load if current enforcement

  Hello

  I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
  It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

  This means that the battery is sinking and ended up to be recharged so just off the coast.
  When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
  At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

  Can anyone offer a solution?

  Thank you

  That s very strange and I guess that this problem could be linked to the hardware problem.
  Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
  In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
  This test can be performed by a technician of the ASP.
  That is why it s advisable to contact an ASP in your country for audits.

  This is a new laptop and warranty should cover everything!

• Satellite M60-135 does support C - salt?

  Hello

  TEAC DVD player no longer works.
  So I would like to replace it.
  Think I fell on the drive Pioneer DVR-K16L of alternatives.

  But it is obviously set to "cable select".
  My M60-135 does support this, or do I have to choose another drive?

  Any suggestions welcome!

  THX!

  Hello

  These information are not known to me, and especially if you want to buy a car for you laptop, you must first call the Toshiba authorized service provider for more information on compatible players.

  There is also another possibility to find out what the laptop supports parameters.
  I use Nero burning rom and this application supports a diagnosis function. He entered the information about the installed CD/DVD drive.
  After this diagnostic procedure, you need to know more details about the installed drive and you must buy the player that supports the same specifications

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite M30X Pro does not charge on current alternative

  Hello. My satellite M30X pro does not load when it is connected to the adapter sector, I have had the laptop for about a year and a half now

  Is this problem likely to be due to the charger doesn't work does not correctly? I don't want to spend £60 for a new charger, namely the charger works fine, and it's actually something else no longer works correctly!

  Thank you

  Is it possible to use the laptop with the adapter?
  No AC lights?
  If yes then the AC adapter works fine.
  In this case, if the battery is not either of the malfunctions of the battery or the thing will not on the motherboard.
  But mostly the battery fails.

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Satellite 3000-514 does not start - 1-1-1-1 beep code appears

  Hello

  http://forums.computers.Toshiba-Europe.com/forums/images/bn_preview.gif
  Overview

  My Toshiba Satellite 3000 514 starts each others time and gives me the following beep code: 1-1-1-1 (4 short beeps) and a black screen.

  Does anyone know what this means?
  This happens roughly every second time I try to start the PC. After l ' works again, it especially works again.

  Any ideas?

  Thank you!

  Hello

  The beep code appears especially if the POSITION cannot be passed correctly.
  If the problem is detected until the BIOS initialize the video card and the code cannot be displayed on the screen of the BIOS will play several beeps.
  Each BIOS supports the meanings of the own beep codes. For example BIOS Toshiba beep code is not the same thing as "beep code" Phoenix BIOS.

  To my knowledge the Sat 3000 using Phoenix BIOS. In this case, you can try to search in the internet for a description of the code.
  I found this site:
  BIOS beep codes

  But generally cannot solve this anomaly just average and I would recommend contact a technician with huge experience computer laptop.