C50-A-1DN satellite: black screen until the battery has been removed

The battery of my laptop Satellite C50-A-1DN was defective despite attentive treatment after more than a year.

Now the screen remained black at the beginning of the unit.
After that I removed the battery, I could see the computer then power up as usual.

How is that?

Well, this question seems a bit strange because even if the battery couldn't keep cooler, the laptop should be able to power being plugged into the mains.

I'm not quite sure that the problem is related to the battery...

However, the battery is a removable part and very cheap... so in all first the battery should be replaced and laptop computer features must be tested using the new good farm work.

If the problem of the laptop will not be resolved even by using the new battery, well in this case there must be a serious problem with the motherboard... maybe power electronic problems...

Tags: Toshiba

Similar Questions

  • Satellite U300 turns off when the battery has been removed

    Hello

    I'm on the laptop with the battery in place, and the power supply plugged in.
    That's when I take off the battery (always plugged power) who, after 5 seconds the laptop powers off.

    It's not happened before and now it happens ALL the time every time I have to remove the battery.
    I noticed that when the battery is removed, the battery light is always on – if for some reason any cell phone still thinks the battery is connected.

    For me, it looks like an electronic power supply problem.

    But it s just my personal opinion

    I think that the laptop should be checked by an authorized technician.

    Contact the ASP in your country and ask for verification

    If the warranty is valid then an everything should be done for free

    Good bye

  • You cannot ship until the document has been transferred to the invoice - gp10

    Hi all

    When our accounting runs through the end of the day, they receive this error:

    You cannot ship until the document has been transferred to the invoice

    I tried Google and found nothing unfortunately. Just click ok and end of day works fine for the rest, but the next day same error. Any ideas?

    You can get support for GP here.

  • APP said file is updated, but it is not installed on the computer (has been removed because it does word not running).

    APP said file is updated, but it is not installed on the computer (has been removed because it does word not running). Now, I can't update or download!

    Office CC lists the applications as "up to date" when they are not

    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  • I download the software from amazon, but when I stop and connection then the software has been removed. can anyone help

    I have a samsung laptop with windows vista. and IE 9. I downloaded the software from amazon, but when I stopped and try to connect then I find that my laptop will not start. so I try to get back to samsung and they fix it so that I can connect, but then I find that the software has been deleted and I don't know why. can anyone help

    Hi elsie,

    As you mentioned you did a factory restore using the Samsung recovery disk, it restored the computer to factory settings & finally deleted the application from your computer.

    You can redownload the application & install it.

    Reference: Install a program

    Hope the helps of information.

  • I would like to know how our organization can recover the license information when electronic mail set up to order the license has been removed and the person retired, please?

    We are a school in Mac OS X 10.6 (Snow Leopard) with Rosetta to Photoshop CS.

    We would like to upgrade the operating system to a newer version, but we are unsure of our status as a license to this product.

    The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

    How can we assign a new Member of staff on our behalf in order to determine what licenses we have and how we can buy new licenses for all additional Apple computers to add to the network.

    I tried to navigate the support area, but I found I was going in circles and the titles and descriptions listed did not address our problem.

    Any help would be greatly appreciated.

    Kind regards

    Keith

    Ok... I'll accept that YOU're doing your job, and that others are incompetent or lying to cover up the fact that they did not do their job

    > The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

    If you know the email address, you can contact Adobe technical support directly to get the information you need

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

    Serial number and activation support (non - CC)

    http://helpx.Adobe.com/x-productkb/global/Service1.html

  • Satellite A215-S6804 - black screen until the system load

    Hello

    I have a problem with the laptop of the subject. After pressing the power button / stop, the screen is black until the Vista/Linux loading bar (got both installed) is visible. I have the most recent BIOS update and replace the LCD (but electronics as UPS etc are old screen, the seller told me).

    The only way it works great (so I can see the Toshiba logo and the menu grub) is when I put the flat LCD on table (I know it sound funny).

    Does anyone have a solution for this weird thing? I tried looking for answers, but found nothing.

    Hey,.

    And if you connect an external display you can see the screen of the Toshiba BIOS or is it always black? That would check whether the problem is related to the internal monitor or a part of the mother/graphics card.

    If you try to enter in the setup of the BIOS is also this work?

    But if it works when you place the LCD flat on the table, it seems that it has something to do with internal LCD cable. I think it needs to be replaced due to a bad connection.

  • Satellite L300D begins only after the battery has been drained and recharged

    I have a satellite L300D that has a problem at startup. Last week, it closed but got stuck on the "Disconnect" screen for a long time. Finally I manually turn it off by holding down the power button. Don't think no more of him it happened sometimes with my computers. However, when I went to turn it back on - it was nothing. Power lights came to the front of the computer, but not to screen at all. Could not even access the BIOS. Nothing. It was like that for several days.

    Tried all the common solutions - removed battery, disconnect the power supply and press the power button - still nothing. Tried w/o - just AC, just the battery. Even stripped down to the motherboard to see if I could remove the CMOS battery and reset the CMOS but it is soldered on the motherboard. Put all back together, still nothing.

    Finally, I had to recharge my cell phone using a USB adapter and given that the computer had power I tried the usb port and it worked (for example, I could charge the phone - still no screen on the computer). The computer's battery is dead and I plugged it in. That evening, after the battery was full, I tried the computer and it has perfectly worked. Started correctly, shut it down, restarted and it was fine. Unplugged this night there and reconnected again in the morning and... nothing. Just a black screen. No BIOS.

    Killed the battery again then reloaded and now my computer is working again.

    Any ideas on what could cause this problem?

    Thanks in advance.

    Hey Buddy,

    In my opinion her only the only one you can is update the BIOS like Akuma suggested. This problem is not related software so that s the only option you have I think. You can download the latest version of the BIOS here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    If this is not the case, contact an authorized service provider please. Guys can fix all this hardware related problems can diagnose this problem. Maybe the motherboard or something else must be exchanged.

    Good luck! :)

  • If I unplug the power adapter for my MacBook for 5 minutes during the migration assistant will continue the migration or the battery has been disabled in utility mode?

    I used the migration assistant to transfer my documents and applications of a backup time machine to my MacBook. I know that I need my wired adapter so that the whole process to complete due to the time it takes for the migration. If I unplug my adapter for 5 minutes the macbook will lose power because of the battery off in utility mode or power will be uninterrupted?

    Im not sure he could stop it, but to be sure I would just leave it alone, because if it is interrupted it could damage the macbook and time machine backup

    better safe than sorry

  • The option to export the songs has been removed in iTunes 12?

    Perhaps my memory is wrong, but I remember being able to add songs from my library (which are all .mp3 files in my computer) to a selection, then right-click the playlist and export these songs in a certain folder in my computer. I want to make this option to export my songs most recently added in the SD card in my phone without having to fetch each .mp3 file individually. But I can't find this option in iTunes 12. It has been deleted?

    "Export these songs in a certain folder on my computer" just drag and then from iTunes and drop in Windows Explorer.

    To export to an SD card, insert the SD card and open it so that it looks like a window.  Highlight the songs in iTunes, and then drag them.

  • Whenever I have download a file, I get a message saying that the file is infected and the virus has been removed but I am unable to open the files.

    original title: problem downloading

    whenever I have download anything download is well over upto100% but the file or the software won't open or saved. It gives the message that this file contains viruses and has been deleted. Please help me find a solution thanks

    I use compaq notebook pesario CQ 60 with pentium dual core inside windows vista AVG anti virus security system

    Hi sirmalik,

    ·         Did you the latest changes on the computer before this problem?

    ·         The problem occurs with all the files?

    ·         From which site you try to download the file?

    ·         What web browser do you use?

    I suggest you follow these methods.

    Method 1: Start the computer in safe mode with network and check if the problem persists.

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Method 2: Try to create a new user account.

    Create a new user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If the problem is resolved in a new user account, you can check the link on the way below difficulty a user profile is corrupted.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • How can I deactivate my CS3 photoshop when the program has been removed

    How can I disable my copy of Photoshop CS 3 when my copy has been deleted from my computer and is no longer accessible

    Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

  • Startup problem on my Satellite - black screen after the Toshiba logo

    I have a satellite phone and I recently installed 3 programs and asked me to reboot. Upon restart, the Toshiba logo appears, and then the screen turns off, it does not load any further. Drive HARD is not running but is under tension. Thank you

    Hello

    And the programs that you have installed?

    You can start the machine in safe mode?

  • L750D-1DQ satellite - black screen after the mode 'sleep'

    My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
    The screen is very dark, I can't seem to clear up.

    I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
    When I restart, the screen works again.

    What must I do, so I can start to work after returning from the mode "sleep"?

    Hello

    You are able to change the brightness in Power Options Win 7?

    Check this box:
    http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

    You can choose a power plant that is enabled in the profile of power you use.
    You will see the option to adjust the brightness of the plan.
    Set the control to the right to increase the brightness. Do this for setting battery and area setting

    In addition, you should go to advanced-> display settings
    Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

  • DeskJet 3520 doesn't print until the computer has been restarted

    I had this printer for years and have never had a problem with printing until recently.  When I try to print something (whether from a Web page or a word document), it crosses as if everything is OK and even displays the print icon down in the taskbar.  But the page will not be printed in fact until what I restarted the computer.  I tried troubleshooting, but this utility says that there is nothing wrong.  My laptop has windows 7 and when I looked for drivers, he said that windows 7 has updated drivers.  I've pretty much exhausted at this stage of my knowledge of the printer!

    The only changes that I made recently are to move from a cleaner who had windows vista on a laptop that has windows 7.  And it printed fine when I made the change.

    Hello

    You have the same problem when you try to print from Notepad or Wordpad?

    Follow the steps outlined in the document below.

    http://support.HP.com/us-en/document/c02205477

Maybe you are looking for

  • Slide to unlock removal could be deadly

    A few days while the comings and goings, an impressive looking sports car whizzed past me. I tried to take a quick picture of it on my iPhone, but because it happened so fast I got a little confused and forgot that slide to unlock no longer works and

  • Change banks without payment information?

    I recently moved to the Japan to teach English and although my credit card is the United States, I can use it internationally and do not wish to get a map of Japanese credit anytime soon.  Is it possible for me to change my store of the United States

  • help HP dl380 g4!

    Hi all Just today when I visited my server rack, my dl380 g4 hp was running his fans at full speed, so I turned on the open server they do see if any material issues. I'm behaving error on my motherboard, here is the list: B1 IE NM Where these LED lo

  • Moto Phone Portal - SMS Add contact does not

    Moto Phone Portal - when I choose 'New message' a new SMS and click on "send to" if I try to drag a contact in the list to the right nothing happens - they cannot be moved, and if I try to copy and paste the contact number - when I click on paste the

  • Get bitmaps of files uses excessive memory

    When I load a jpg as a bitmap image, I lose a lot of memory that I can't recover. I use the GetBitmapfromfile, the GetBitmapInfo, then GetBitmapData, then DiscardBitmap. After that, I have about 120 M from lack of memory (for a 5 M pixels image) that