C55-A-1N1-Sound Card/micro satellite does not work Windows 10

Similar Questions

• Lenovo 3000 N 500 sound card and Modem do not work in Windows XP

  Hello

  I buy Lenove 3000 N500 a few days back from local sellers in PAKISTAN. It has built in Windows Vista.

  I change its Windows XP operating system, now my sound card and modem does not work, there is only PCI device in device manage with yellow sign, but in the Control Panel, there is no modem or sound card.

  I gave the two conextant Audio and Modem drivers against the PCI device but system says that there is no such device for these drivers.

  and when I run Setup conextant Audio and software of the Modem, it is said that there no such device FRO these drivers

  Please advice what to do to make it functional.

  Thank you

  Sani

  If you use the version pre - SP3 of XP, you must install KB888111. It's the UAA bus driver. After you install this hotfix, install the audio driver and modem driver.

  Enjoy.

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

  Hello

  I suggest you to try the steps in the following Microsoft Help article and check if it works.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

  I made an annual subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

  I read that it will take as much as 24 hours for a purchase to show your Adobe account

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• I inserted the wireless network card, but it does not work on Satellite A30

  Hello please, be gentle, lol.

  I have a Satellite A30, no manuals, disks etc. of second hand.
  I had to buy a wireless card and installed it myself (error?).

  The card is an Intel P/N: PA3362U 1MPC.

  My is... have issue I installed it properly (see below), and can someone point me in the right direction for the correct driver?

  (Correct?) installation... .clipped perfectly in the slot in the compartment in the base of the laptop. Two sons rolled? one longer than the other?
  I plugged them as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  How could I not if it works?

  The LED does not illuminate when the wifi switch is on?
  Is it normal when the driver not installed? FN + F8 has no effect? Again the ths is normal without driver installed?

  Thank you in advance, I'm completely stuck here... Matt

  Hello

  The PA3362U 1MPC seems to be a network wireless Intel PRO/Wireless 2200BG MiniPCI Type 3b card. I think it is s ok and should be compatible.

  The WLan driver should be found here:
  http://APS2.toshiba-tro.de/WLAN/
  Take the Intel PRO/Wireless 2200/2915 driver.

  > I plugged these as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  I put t know which wire is short or long, but the two sons are different in color.
  Should the white cable goes to the hand and Brown to the auxiliary voltage

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=45273

  > How could I not if it works?
  Well, you will not be able to connect to the Wlan ;)

  > Is - this normal when the driver is not installed? FN + F8 has no effect? Again the ths is normal without driver installed?
  You should check if the other FN keys work correctly. If other n t FN keys work then Fn + F8 does not work too

  PS: you can activate the WLan also in Device Manager-> properties-> tab advanced Wlan card

  Welcome them

• C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

  My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

  I installed the battery Bluetooth for windows ver.9 but it also does not work.

  can someone help me with this please?

  C850 satellite is not listed as a book of 10 Windows compatible.
  This means that Win 10 drivers are not available for this unit.

  In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
  In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

  Now after reboot, win 10 must search for removed devices and drivers missing.

  I hope this could solve your problem of BT.

• The sound in my apps does not work unless my headphones are plugged in, how to fix this?

  The overall sound does not work in any of my apps unless earphones are connected. All other sound works and I checked the individual applications to ensure that the sound is turned on and he says he is.

  Try this...

  Close all open applications... Sign in your account... Perform a reset... Try again...

  Reset ( No Data will be lost)

  Press and hold the sleep/wake button and the Home button at the same time...

  Wait for the Apple logo to appear...

  Usually takes about 15-20 seconds... ( But may take longer...)

  Release the buttons...

  If no joy... Try to plug and unplug the helmet a few times... Be nice...

• Satellite A100 (PSAA9L) - the does not work Windows XP it has close

  Hello
  I recently put a satellite A100 (PSAA9L) and when I try to turn off the laptop. It shows the closing of the screen but does not work, stop.

  Please tell me what to do with this problem.

  Thank you!!!

  Hello

  There must be something wrong with the OS files or registry entries.
  Maybe some background process cannot be closed and therefore the shutdown process does not
  Microsoft has released a useful document about solve the shutdown problems in Windows XP.

  Please check this box. Maybe this helps:
  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

• the sound in my pc does not work

  the sound in my pc doesn't Iwas tp headphones by train and since then, no sound, I remove the helmet and not sound at all I don't test the speakers works but no music came from you better not his tube at all

  Hello

  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Sound does not work Windows 8 HP ENVY Phoenix 810 PC

  Original title: HP ENVY Phoenix PC 810

  I just put my new computer today and there is no sound. It does not appear to be pregnant anywhere on the screen. Are supposed to be? I also tried to plug the headphones into the top port of the Tower, and still there is no sound! Help, please. I paid a computer person to install this feature for me, now I'm worried, I'll have to return this machine and be the money that I paid for the help in setting this up.

  Hello

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. Do you see a "Red X" mark on the volume icon in "Notification tray"?
  2. Did you make any changes after you set up your PC?

  This problem may occur if one or more are true.

  • Hardware failure.
  • Audio drivers are not installed or disabled.

  I suggest you follow the method below and check if it helps.

  Method 1: Convenience store;

  1. Press Windows Logo + 'W '.
  2. In "Find", type "Troubleshooting".
  3. On the left, click "Show all" and in the list, click on 'Hardware and devices' to run the troubleshooter.

  Important: After you run the troubleshooter, it is recommended to restart the computer to apply the changes.

  Note: After restarting, try to listen to music and check if the issue still persists. If audio does not work, you will be invited to an "error" or "error Code". I suggest you to make note and respond to us.

  Meet us with the required information, then we can help you further.