C55-b860 satellite is not booting

Hi all

I have a Satellite laptop c55, b860 which is not booting unfortunately. I disassembled it and deleted all the components that are connected to the MB, including hard drive, keyboard, and touchpad and also changed ram, but still the laptop does not start. As soon as I connect the power (with no hard drive attached), I hear a little gurgling noise. Not even the small hard drive is lighting up so it seems that the problem is with the MB. However, I'm not sure if it's the power supply. Can anyone give some advice on this? or maybe experienced something similar? Thank you

Any comment please?

Tags: Toshiba

Similar Questions

  • C855 satellite can not boot from battery after upgrading W8-W10 Home >

    Hi all

    I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

    I bought a new battery, but it still had the same problem. Cannot start system battery only.

    The following steps, I was

    • Got the latest Bios Update
    • Used a new battery
    • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
    • Do seals in my power, parameters of balanced energy vice versa

    Is there anyone who has had the same problem or can advise me?

    Thanks in advance for the help

    Hi Repairlab

    You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
    I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
    I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

    In any case, did you ever solved the problem, and if so can you please share?

    Thank you.

  • C55 - A satellite does not recognize battery

    Hello!

    I have a Toshiba C55 - A - 1 L 4 and the problem is that my laptop doesn't recognize the battery.
    The battery is full and when I open the pc, before you put the password, I see that it is full and it shows, BUT if I try to make it work only on battery it doesn't work, I can't boot up the laptop.

    Also, I noticed that the small lamp at the front for battery shine like the other 2 (one for the wi - fi one for power) who does not have a plug/battery drawn next to it.

    So, to conclude, I have no idea why this happens, and if anyone knows how to solve this problem please share :)

    Thank you

    Hello

    DC IN / battery LED (indicator) should light up amber when the AC adapter is connected and the battery is being charged. If the low battery charge, the will of the orange flash indicator shows that only a few minutes of battery power remains.

    If it s not the case, there must be a problem with the power supply of the power adapter or the battery.

    In my opinion the new battery should be tested

  • C50-A634 satellite will not boot from USB or DVD

    My new toshiba Satellite C50-A634 won't boot from usb or dvd,.
    I downloaded victory 8.1 and burn the image to a dvd but I always get an error message "no boot... device please restart."

    Can you please help?

    Hello

    Startup mode of the change in the BIOS settings and you should be able to use the optical drive as first boot device - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

  • C55 - A satellite does not work on battery

    Hello

    I HAVE A TOSHIBA SATELLITE C55A (PSCG8E).

    AFTER THAT THE BATTERY FULLY CHARGED WHEN I UNPLUG THE AC ADAPTER OFF THE COMPUTER.
    I HAVE ALREADY CHANGED THE BATTERY AND NOW I HAVE THE SAME PROBLEM.

    ANY UPDATE OF THE BIOS FOR THIS PROBLEM?

    Something like that shouldn't happen, not on all new laptop.
    > HAVE ALREADY CHANGED THE BATTERY
    What did you do exactly? You have new battery from your local dealer?

    In General, this should not happen, and in my opinion, you should ask for new machine if you can get a. Otherwise, I think you contact the nearest Toshiba service provider and ask for help.
    In my view BIOS has nothing to do with it.

  • L50D-B satellite is not booting

    Hello

    I have a laptop SATELLITE L50D-B.
    I had some problems with my computer starts. I don't remember if it's after a standby or hibernation (you know any newspaper with this information)?
    What is happening is black screen, power on, and caps lock and num lock LED on. The latter two is always and do not stop even if I press the buttons. There seems to not be any activity on the disk.

    Does anyone else have this problem?
    Thank you

    Sometimes it may happen that the laptop would not be able to wake up mode sleep or hibernation, in this case it s advisable to remove the battery + AC adapter and press and hold the power button / 30 sec long.

    After this short intervention, plug in the battery and the AC adapter and the laptop must turn on by pressing the power button.

    But this procedure would not work for each laptop because for some portable models it of not possible to remove the battery the battery is hidden under the plastic cover

    In this case, you must check if the laptop would support additional force off switch as described here:
    http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

    But in general this should very often appear where this issue would occur every hour after setting the laptop into hibernation/sleep mode, you need to check if the BIOS can be updated.

    Also RAM problems could lead to similar problems then, probably, the modules should be checked for possible malfunction.

  • L750 satellite is not booting - does not light

    Hi, I have a Sat L750D-14R (3 years) that the powers are no longer on nor do the lights go on when the power cable is fixed; the food is very good - see last paragraph. I tried power with only the battery and removed but battery power cable set and the unit remained completely unresponsive in both cases. Everything is nothing, no light, no sound, nothing.

    Little background. Left corner of a few months back (Apr) the thing took a dive on the lower hull cracking on the back and the moving screen, however, after connecting to an external monitor the startup thing fine, showed no sign of additional damage / questions and worked without a hitch so far. Close one day last week and when I came back two days later and turned on the plug I noticed that the usual lights were dark, and thereafter nothing has worked.

    Since then, I have opened it upward and can see no obvious visible damage to any of the internal components. I had met some info on a short-circuit via the screen and as he was broken in any case, I unplugged the cable from the screen. Unfortunately, this made no difference, and the unit is completely dead.

    In addition to checking the base power adapter was not at fault, I used a multicard and having a blue on light. When it is plugged into the laptop would go blue light which must be stable for a few seconds, then off for a few seconds, on the back and would keep it if I had not immediately disconnected it. Needless to say, this is aberrant behavior. I thought maybe the power supply is in some way responsible but surely the unit should start up on battery alone at least until the battery runs out?

    Any ideas as to what might be causing this or how I would go to the audit of the other?

    Bravo for pointers.

    Can you tell us what you did exactly?

  • C55-A-100 satellite does not power down after update BIOS 1.30

    A week ago, the Toshiba software installed on my C55-A-100 Satellite suggested that I installed a new version of the BIOS to 1.3.

    Since installing it my Satellite will not turn off.
    If I close the lid the screen turns off but the laptop is running, if I open the lid nothing happens and I have to keep my finger on the power button to force it to close.

    The same thing happens if I press the power button to turn off, blank screen and it continues to run, then I have to force a shutdown by holding the power button pressed down. I also noticed that the satellite seems to take ages to power.

    Can anyone provide a solution or experienced the same problems.

    The Satellite is running win 8.1

    Thank you

    Ben

    Please change, as described on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and try to proceed to a complete stop.
    It work correctly?

    Have you noticed this problem just at the moment where you change the options of closing lid and pressing the power button?

  • Can not download the display driver for my C55 - A Satellite

    I'm not sure I've come tro the right place that my post is not really computer related, but I will ask my question in any case.

    I tried to download the display drivers for my C55 - A Satellite for the past 3 days, the download happens to between 10 and 15% done then stops just I don't know if it's the Toshiba site, my pc or my internet I tried several times during that period of time, and each time the same thing happens.

    An ewlse had this problem with the Toshiba site. If I'm in the right place to post this comment, please direct me to why I should post.

    Thank you

    Hello

    Probably your driver download problems were related to problems of time server.
    The fact is that I could download the display driver for this model and the process was not interrupted.

    This is why I think that the server problem has been resolved.

  • C55 satellite will not start

    Hello

    I have a Satellite C55 and it does not start until it makes a noise the fan start and stop.

    I tried to take the battery and the power cable holding down the power button for 20 sec.

    without the .de battery low f2 and tried now press f8 but nothing works

    any ideas?

    @drnaushadalam

    In case of hardware problems laptop, please get in touch with Toshiba authorized service provider in your country:

    Here is the page that provides your information on all available worldwide FSA
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

    But before you contact the ASP check of workaround:

    • Disconnect the power adapter
    • Remove the battery
    • Power button press and hold 30-40 long s
    • Then insert the battery and reconnect the AC adapter.
    • Press the power button
  • Satellite A60 Pro is not booting

    Hello

    I hope someone here can help you. I know that this laptop is old ages, but it's the only one my aunt and she would that he repaired if possible.

    Basically, the question is this.
    You can start the laptop, all the normal lights light up and the screen with the Toshiba logo and 4 icons at the bottom and then... nothing.

    He's sitting there for centuries, showing the logo and nothing more.
    You can turn it off by holding the power button down and turn it back on again, same thing.
    I did this without the disc without the optical drive and HARD. No difference.

    The worst part, without a keyboard input seems to be accepted. I help ESC, F1 and F12 on separate occasions but no change - goes to the screen of tosh, no other movement.

    HARD drive and optical drive turn up, as in they make noise and you can feel their displacement.

    I'm at a loss and need help please!

    Phill

    Hello

    If the laptop is unable to pass the Toshiba start screen, then this would mean that a serious hardware problem has been detected.
    During the startup process, POST (power on self-test) is running (for the POST, you see the Toshiba start screen) and the material is checked. If that fails, the laptop would not boot the system.

    I guess something is wrong with the motherboard. You can see the modules of memory, but in the case where the modules are ok, the mobo may be the troublemaker.

  • Satellite A200 - 19L can not boot from the CD

    Hi guys,.

    I'm glad I found this forum site, I pretty well hope to find a solution here.

    Well, this problem is not very complicated, in fact my DVD player (model TS-L632) is not read more, so much so I decided to change with a new one, but it is not the same model as the original drive.
    It is the case of the generic DVD player really.

    Now when I inserted my recovery disk or any bootable disk is not booting the CD, and when I press F12 for I can't find any CD/DVD drive, but running in Windows I can't find the DVD player and it can read any CD priority boot normally.

    Just having the problem while booting from CD.
    I thought that maybe there is no security for this model that locked some hardware.
    So please guys want to help me how to understand it,

    any help would be greatly appreciated.

    Thank you

    > When I press F12 for boot priority I can't find any CD/DVD drive, but running in Windows I can find the DVD player and it can normally read any CD.

    The whole story seems really strange to me
    If you access the BIOS, you can see the details of the CD/DVD drive? The drive is recognized properly?

    If not then I guess that the STRANGE inserted is not totally compatible due to different master/slave/c-salt settings.

    > but running in Windows I can find the DVD player and it can normally read any CD
    It s also strange to me so that the CD/DVD drive appears in Device Manager even if the CD/DVD drive Startup menu option does not appear.

    But first check the BIOS

  • Satellite L300-1AS - error PXE - boot error - will not boot from USB

    Startup error - error PXE-L300 1AS - will not boot from USB

    I recently bought a new HD to replace the original that my laptop takes an hour to load.

    I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

    I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

    Any help or advice will be appreciated.

    Thanks in advance.
    Abul

    New HARD drive has nothing to do with it. Problem must be your USB key.
    In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

    I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

  • Satellite M45-S355 boot cannot from the CD

    Hi, I have a Satellite M45-S355 laptop.

    When I try to boot from the cd... He spent the cd splash screen and starts windows normally... DVD player does not turn... Reading CD, DVD...

    And also, I try to boot from external DVD - drive... But I did not boot from this drive too... And also I have no boot from usb because this computer does not support boot usb :/

    What can I do? Do not change your computer =)

    I'm waiting for your media... Please help me...

    (But I also have to say that I was starting the cd/dvd drive... But a year ago my CD/DVD drive not read CD only DVD playback... And I gave my computer to Toshiba and they changed the DVD player... After they changed the drive, the drive can read CDs and DVDs but now it can't boot from cd).

    Hello

    Maybe just this particular recovery disk can not be read by the CD/DVD drive.
    Copy/burn the recovery to another disk drive that can be manipulated buy the CD/DVD drive.
    I had good experience with R TDK discs.

    Use another computer to copy this disk and then try to start using this new disc

    Good luck

  • White screen satellite C650 - no Boot Up

    Satellite C650 - no Boot Up - white screen

    This laptop is just over 1 year.

    Laptop screen suddenly went white, he is stopped even if the battery was half full.

    It will charge is no longer and the charging light does not illuminate.

    Does not respond when you press the power button, even using from the mains.

    Is it a common problem with this model?

    It is possible to address the question, what are the steps involved in the process?

    Laptop needs spare parts to fix this?

    Thank you.

    > Is it a common problem with this model?
    Certainly not and something like this can happen on every laptop.
    On this virtual path, it is not easy to say what problem can be. All of a sudden switch OFF may be related to material high temperature and overheating.
    I put t know how I can you use your laptop on battery power, but I hope you don t use it in the lap or bed and the air vents are not blocked somehow.

    Place the laptop on the desktop and check if the same thing will happen again.

    When the laptop turns off and you leave it for a while, can you restart normally?

Maybe you are looking for

  • Problems of microphone with the Satellite A200 - 14 d

    HI when I try to talk on Skype, on the other side either does not hear me, or they hear me very bad.I tried pluggin in the headphones and they work, but whenever I turn on my computer, the settings seem to have disappeared. In the Panel that I'm on t

  • DeskJet 2540: deskjet 2540

    I'm trying to install the HP Deskjet 2540 on my MacBook Air, Mac OS X 10.10 Yosemite running.  I downloaded the drivers on the HP site and installed the drivers.  When I get to the HP Setup Utility, however, the clock has been running and my printer

  • T41 2373-A10 - problem with the "PCI Modem"

    Welcome! I got this laptop old and there in Device Manager (not sure name this in English, I use Windows XP SP 3 Polish) I had what we call "PCI Modem" and there is a warning to her... I have no idea what to install for it to work properly. I already

  • I can't usebelkin 802 1.1 I have no driver can u help

    Ive lost driver and cannot be installed; lkin wireless adapter

  • printer is not running commands to print from gmail

    do not print when command to print from gmail Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you hav