C5580 all-in-one disconnects - error on screen numbers a

Similar Questions

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• C5580 all-in-One Photosmart Pr: c5580 print usually

  I have a Photosmart C5580 all-in-One printer stopped printing from my laptop for about a month before, i.e. December 2014.  An error flashed, but it disappeared before I could read it.  It will print

  When you copy something and it will show a diagnostic page that makes no sense for us.  We bought a new

  cord for it but that made no difference. The computer is a HP Pavilion dv7 laptop. AMD

  Turion (TM) X 2 Dual - Core Mobile RM-70 until it works very well.  Thanks for any help you can give

  Hello @SunnyCat11 and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help!

  I recommend you to perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also run the following updates:

  Utility software update from HP

  Critical update

  Critical update to correct a PC Printer Communication issue

  Critical update for HP

  In addition, these pages are print after the document you copied, or instead of?

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Quality of printing on my HP Photosmart C5580 all in one is not very good

  Hello

  My parents have a HP Photosmart C5580 all-in-one printer.  Their old computer was running XP and the printer printed beautiful photo (using HP Photo paper).  The recently buy a new computer that is running Windows 7.  They called me after that that they got rid of their old computer XP.

  The problem is that the HP C5580 is no longer made a good job of photo printing.   I have been in their house and they owe me that the use of the printer to print then we have printed a new photo to the printer (which was horrible).  I then downloaded the latest drivers for Windows 7 from HP, installed and reprinted the image.

  The XP computer disappeared, so I've no idea what program they used to print photos.  I used Picas (latest version) to view and print the pictures on Windows 7.

  The new photos are very washed out. They remind me of the photos printed on the ink jet printer initially on plain paper.  They are not photographs.

  Anyone have any ideas to improve the quality of the photos?  If it is a better program than Picasa we should use to print the photo?  Is there a way to caliabrate the printer?

  Thank you

  Dennis

  Hi Dennis you have posted on the discussion of the ePrint/Mobile Forum so I'll ask that your post moved to the Printing Board Issues & troubleshooting in the hope that you receive relevant responses. In the meantime, I suggest that you check the ink levels in the supplies in the printer and print a diagnostic. You should be able to get it out in the printing software HP you have downloaded or directly from the front panel of the printer. If ink, levels are low in all of the test color cartridges to see if that solves the look "washed out" prints.

  Good luck.

• My c5580 all in one printer has a broad black band

  My c5580 all-in-one printer copies or scans have a broad black band along the right side of the paper when the scan or copy.  The scanner glass is clean and it seems that all the scanner bar lights are lit.  The printer prints fine fron the computer.  Scanning the computer shows the same black line

  is broken - is there a solution?

  Dennis811

  dennis811,

  I'm sorry to hear that it worked for you. If you need help with your options maintenance that you can join to support at 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://goo.gl/kQDB - for available options. Let me know if you have any additional questions.

  Good luck!

• HP Officejet 6310 All in One – "cartridge error - remove and re-insert cartridge on the left.

  HP Officejet 6310 All in One "cartridge error - remove and reinsert cartridge on the left."

  Help!  With this error message, it is not allowing me to print at all.  I did the steps to clean the cartridge and carriage of the printer inside, twice with no result.  I turned off and unplugged the printer several times also. In addition, the cartridge that I just put is new.  Frustrated.  Thanks for any help you can send my way!

  Hello

  Looks like you did the correct steps to try to resolve the problem. If you did all the steps on the below link without resolving the issue, the hardware may be damaged.

  http://support.HP.com/us-en/document/c00831987

  After checking all steps have been completed, please call HP at 1-800-474-6836 for see what upgrade options are available for this model.

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• 8710 HP all-in-one: fax error 346

  I get the error message 346 when sending faxes.  I have faxed to other numbers and he's been through.   Fax 888-HP FAXME and got a return fax.  I tried Dow to slow speed and it did not help.  What can I do else?  I can't work like this!

  Hi @dorcase,

  Welcome to the HP Forums!

  I noticed your post that you found the error fax 346 with your HP Officejet 8710 printer all-in-one. I'm happy to help you!

  This error means that the remote machine (person you send) responded to a fax on the local computer command because the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.

  New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Source: Fax Error Codes and Solutions.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• J6480 all-in-One: J6480 bad LCD screen

  Love my J6480 old all-in-One.  Still works fine, BUT LCD screen has become barely legible.  Strongly limits the use of the features on board.  I would like to replace the LCD screen.  This user is feasible?  Not a ton of HP74/75 cartridges, so don't want to get new printer that uses different.  For a long time, out of warranty, so it's not a problem, to the extent where I enter the inside of the case.

  Thanks for any advice,

  Jim

  Hi there Jim, aka @JimHCNMT

  Unfortunately, the screen is non-replaceable. If you are looking to solve the problem, I would say the steps located in the guide below.

  The HP printer won't turn on or respond when the power button is pressed

  If you wish, you can definitely give us a call to see about your replacement options!

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy holidays

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• Using Lenovo C540 all-in-one as a second screen

  I recently bought two computers, a laptop Asus desktop Lenovo C540 all-in-One touchscreen, Windows 8 and Windows touch, 8.

  The issue I'm facing is to attempt to use the Lenovo as the 2nd screen to the laptop. Is this possible with an all-in-one device since it is not a stand-alone monitor? If so, how would I go on this subject?

  I tried just to plug in an HDMI cable between the two and go in the options screen 2, but which have resulted in nothing.

  Hi Bushy808,

  Welcome to the Community Forums of Lenovo!

  I checked the C540 details and the HDMI on the back is only for HDMI output

  The unit is has a HDMI to display an external device on its screen.

  

  Best regards

  Solid Cruver

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• HP Envy 4500 e-all-in-one: 0XB0595DD2 error Code

  Hello

  Can anyone help identify this error code and a possible resolution? I plugged my printer yesterday and the 0XB0595DD2 error message came immediately. I turned the printer on and off a few times, but it happens every time (the printer was not connected to my laptop). My printer is the: HP Envy 4500 e-all-in-one, model no SD-GOB-1301.

  Thank you.

  Reference:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me