C7180 HP printer goes offline when it is connected with the wireless network

Similar Questions

• laser jet pro printer MFP M127fn newly installed cannot connect to the wireless network

  I just bought the printer [all in one].  I initially put in place by using the CD that came with it and a USB cable.  Then downloaded the update from Apple software, following the instructions, but cannot follow the instructions online.  I can't find the menu on Control Panel wireless.  It is not upward under Network Configuration.

  Hello

  The HP Laserjet M127fn is not a wireless printer (model M127fw however provide wireless capabilities), it supports only wired network connection, as you can find below in the connectivity section:

  http://support.HP.com/us-en/document/c03898081

  Jean-François

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• 4 iPad unable to detect the C4599 already connected to the wireless network printer

  Hi all, I have a C4599 All in One Printer. I have just set up successfully with a WiFi connection to my router / modem network (infrastructure mode). There is no error message and I can print from a variety of laptops Windows (XP, Vista and 7). I loaded the HP eprint app on my Ipad 4 but it can not detect the printer. Note that the HP site says that this printer is compatible with the App ePrint.

  A second and possibly related is that I recorded with the HP eprint service website but I can't get the code or e-mail address for my printer. I can't find any way to turn it on the Web Services on the printer? (The HP site says this should be under Setup > wireless to the printer, but it is not.) There are only options to turn on/off the wireless, testing the wireless and print the wireless network and printer settings (which are all OK > PASS or information).

  Any ideas?

  Thank you

  With the update that has been done to the ePrint application, some of the old printers lost the ability to use this application to print from. The printer would not print directly from the iPad to the printer either. This is a feature called AirPrint. When you have the possibility to use AirPrint, he must place the unit on the same network as the printer, pull up a photo, press the action button on the iPad and then select print. The iPad will then give an option of the printer to print from if there is more than one printer capable of of AirPrint on the network.

  The printer cannot produce a code to register and save ePrint due to the age of the printer. Printers that have the ability of ePrint are a majority of those who have been in production in 2010 and later versions. A few Photosmarts who have the ability to use ePrint AirPrint are the 7520,6520 and the 5520. To learn more about these printers, see this link here.

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• Connection to the wireless network printer

  My power went market last night and now my Deskjet 3050 a is no longer connected to my wireless network.  How to reconnect?  I don't have a usb cable to connect the computer to the printer.  It's the first time that this has happened - I've had this printer for over 2 years now.

  OK, I pulled down the manual and you do not have an installation wizard, sorry. You will need to use a USB cable from the printer and follow the instructions on page 32 of the User Guide to get back attached to your router.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Guard printer goes offline and create a copy of the printer

  Hello

  I have a printer that does not have very easily the first time. First time, I actually connected via usb first and then installed driver after. I then deleted and did the opposite way around. This seemed to work properly.

  However, it will work for awhile and then the printer will be displayed in devices and printers, but does not print anything OR a copy of the printer is displayed.

  I tried the passage of the printer with another of the same model and the question remains... so it doesn't seem to be a problem with the computer itself. It is running 32-bit win7. I also tried to change the printer usb cable and cable supply.

  So now when the present question, either on the printer market at least will get it print again... OR I need to go into print management and remove the printer and driver package and then restart and then reinstall the driver and connect... it works so perfectly for perhaps a day or two...

  The printer is a printer of labels Zebra with the latest driver.

  I have a second printer running on this machine very well (it was installed after the other printer).

  I wonder if I need to do a complete withdrawal (registry and all) of any trace of the printer to reinstall it?

  Go to your Control Panel Printers folder. Look for your printer. Right-click on it and make sure that it is set to "use printer online".
  Remember if your printer is turned off the power, it will show as "offline". When you turn it on it should automatically go back to 'online '.
  You can always change where I showed you.
  This should take care of it.

• When I connect to the wireless network, it shows that I'm offline and I can't open a webpage as Google or Skype.

  Original title: network Ethernet NIC network adapter wireless network device

  I WAS USING MY COMPUTER, THEN HE WAS BLOCKED COMPLETELY, SO I HAD TO REINSTAL IT AGAIN, BUT WHEN IREINSTALIT AGAIN ONCE I STARTED TO HAVE A PROBLEM THAT IS (WHEN I CONECT TO WIRLESS AFTER 5 MIN SHOWES TI I'M OFFLINE AND I CAN'T OPEN ANY PAGE ON GOOGLE OR EVEN MY SKYPE) ALTHOUGH I AM STII ONLINE, SO I HAVE TO SWITCH IT OFF AND TURN IT BACK ON, CAN YOU HELP ME FIX IT, THANKS

  Hello

  1. what version of windows you are using on the computer?
  2. do you get any error code or error message?
  3 were there any hardware or software changes made on the computer before this problem?
   
  See the help article and check if it helps.
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Response with more information to help you.

• can not print says printer connected to the wireless network but pc says printer is offline

  happened before the printer says connected to the network but pc says offline

  Ok

  Have you tried the Network Diagnostics to see you the network can see the printer

  Go to www.hp.com/go/tools

  Network Diagnostics has a link to the wireless printing site that can help out you.