C7250 connected wireless works with wired ethernet PC but not wireless PC
C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.
Can ping the IP of the PC cable but not wireless computers.
Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.
When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.
Firewall is not the issue because I tested with the firewall disabled.
Any suggestions?
Thank you for your help.
I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.
I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.
Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.
I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.
THE PROBLEM WAS IN THE ROUTER.
These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.
I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.
RESOLUTION:
The router I was using was a Linksys WRT54GS Ver 1.
I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.
I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.
I checked the firmware on the router worm 7 was the later and pulled up.
The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!
I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!
I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!
I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!
Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.
All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.
I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;
THANK YOU FOR ALL YOUR HELP PRINTDOC!
PRINTDOC BRAVO!
Tags: HP Printers
Similar Questions
-
Can connect to Skype with a single account, but not with the other
I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?
You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.
-
PALM TX will turn on and work with power cable plugged but not when disconnected?
Hello all-
I have a PALM TX, who bought in 2005. It worked fine but I changed my position and my last job stop supporting. That being said, I can use now and have recently it turned on and loaded schedule, etc. However, it does work when I plugged in the power cord. It works very well with the connection, no problems. That said, once disconnected from the power source it not light?
I finished the soft reset several times. With reconnected to the power cord it works fine. However, it still not work with the power cord?
I was reading online in various forums and it seems like it might be my power button?
Does anyone else have this problem?
Any ideas or help would be greatly appreciated that now I can use and really want to use it to its full capacity.
Thank you!
Joe
The connections of welding of switch on the motherboard have been a little weak on the TX line.
It seems to me that the battery is dead. The TX can also turn on by pressing the front buttons. Try to press one of them and see if it lights.
There are several online sites for repair and PDA batteries. TX peut battery be user servicable, although it is a little intimidating for a novice. If you Google 'Palm TX battery replacement', many hits will occur as well as how to videos!
WyreNut
-
I have MS Office Pro Plus 2007 is installed on my computer. I also MS Office 2003 is installed on a different computer. Snapshot viewer is installed on both. My snapshot of work files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would allow me to save them either! Is this a problem with FireFox (3.6.8)? However, I have no problem, open them using IE7/8 on both computers. Any ideas? Thank you.
I heard about other problems with Office 2007 to 2003, but most of the people do not have Pro/business versions with access, so maybe there's a previously unnoticed problem.
As indicated in my previous post, I don't always understand how you try to access the file. Can you right click and "save link as" to download?
-
Why goolgeearth does not work with Chrome and Safari but not Firefox
When in firefox using Google maps and click on "EARTH", I get a window indicating that, to use the 3D, I have to install 21.0 Google Earth plugin with option click on 'Download '. Note: Firefox 21.0 and MAC OS 10.7.5 have all current software updates installed. Safari and Chrome are asking not for any plug-ins and 3D Earth option works very well. ANY HELP?
PS my MAC has an Intel HD Graphics 3000 installed, but my MAC, Safari, and Chrome work fine.
Google Earth requires a graphic that comes pre-installed with Chrome and Safari plug-in. If Google Earth works on other browsers, install the Firefox plug-in is the solution. To install this on Firefox, download it from the prompt window, or go to https://www.google.com/earth/explore/products/plugin.html.
-
Cannot connect to itunes connect comes up with your ID Apple is not enabled for itunes Connect (2002)
What did you do
-
VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?
I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.
You use DVD + R disks? Those who are not compatible with DVD players before 1997. The DVD-R is compatible with all DVD players.
-
Hi all
I have been a user of cc muse and created 3 versions of storage for office, ipad, phone.
Recently I started working with sensitive muse and do not see a possibility to create 3 versions (in one is not good for me).
I tried to enter with Fix lenth (not liquid) but cannot create a version for phone.
Thanks for help
Adaptive and Responsive Design are both supported. Please see the discussion here reagent phone or tablet buttons update-no more?
-
Hello.I just purchased 14 elements and installed updates, version of Camera Raw is now 9.3.0 and should work with my Nikon D7200 but is not, help is needed!
Good to know that things started working well for you.
-
My DVD works on our television screens, but not on some of our friends in televisions
My DVD works on our television screens, but not on some of our friends television screens.
He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
What is a parameter when creating the video to digital photos or a parameter on television of our friends?It has nothing to do with the connected TV!
It s is the DVD drive!Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.
You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives
-
LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying
My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.
Hello
LifeCam HD-5000 - Support and warranty (3 years)
http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#supportMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
http://www.Microsoft.com/hardware/en-us/supportProduct Solution Center
http://support.Microsoft.com/hardwareMS material takes in charge and recourse in warranty (90 days support of)
the date of the 1st call).1-800-936-5700 or 1-800 Microsoft (642-7676)
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
USB works in XP safe mode but not in "normal" mode.
Hello
Something has trashed my usb connection because none of them work. They worked a few days ago, but not now. The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.
I tried system restore to restore to when I know they worked (Saturday). But the restoration said it cannot restore at this time there. I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.
I went to the HP web page for this computer. They have no USB drivers, so I download the chipset and installed driver. It does not work.
I tried to uninstall USB devices by using Device Manager. Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers. But I can not use devices.
I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.
I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.
I am current internet search for USB drivers for this computer. But I still found nothing.
Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google. Currently, I'm looking Drivers USB a1514n.
I would like to reinstall the USB drives, but I can't find them. Or some otherway to get USB devices working again.
Thanks for any help.
Dennis
All,
I got it to work!
I have not updated the driver for the USB hub. However, I finally tried to update the driver for the USB EHCI controller. Once I updated the driver for it, all the USB ports and the connected devices are recognized.
Life is good again. It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!
Denni
-
Menu Widget provided with Muse shows some but not all my submenu items.
Menu Widget provided with Muse shows some but not all my submenu items.
Here is the site on catalyst: http://cgfnewsite.businesscatalyst.com/index.html
The problem is in the submenu of the media/articles. It only shows two and there are many others. If you go to the page you can see all the links. I have the page hierarchy properly set up in the title of the page articles with titles. I've even shortened to see if it works.
Under the videos link all sub links appear.
Any help would be appreciated. I code a little, but I'm not very good. So please be technically.
Thank you!
Go to outline view, click with the right button on a page "invisible" and
(1) make sure, that under 'menu options' the point 'include the page with hypertext links' is enabled.
(2) choose the option 'Page Properties' and check 'Page Properties/Options', the "Export Page" element is turned on.
-
recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!
Take a look at this: generic icons | Files camera raw | Adobe Bridge
-
I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!
Version: Adobe Acrobat 9 Pro
Windows
I found the solution:
In the PDF file, click View > Navigation panel > Pages
I had to reset panels to view the Pages again.
Thank you!
Heather Solis | Operations associate | Crown AFAM Capital, Inc.
[personal information deleted by Moderator]
Maybe you are looking for
-
Why is it so difficult to get Firefox to play web videos?
I developed a very basic login for my website page. It contains a second film 45. It works on IE, Chrome and Safari but do not work on Firefox. Why? I spent many hours trying to try workarounds with no luck. I plan to put just a statement on my front
-
I wanted to preorder the album 'Death of a Bachelor' a few weeks ago, and I had enough money, so I did. And he asked me, I thought it was weird, because the album was not yet, but I rode with him. When the album came out today, I had songs that have
-
Using headset blackBerry smartphones
I just got my storm a few weeks ago, and I was playing with the media player. Tho, it seems that the sound is terrible when you use headphones, it seems that he echoes, and starts singing and all you can hear is the rythym. I think I've found a son
-
Newly purchased, new user. Loaded the software as shown, but do not sync with my computer. Consider using the Palm strictly as a planner on the fly. Problem 1: No keyboard. Should it be a light at the bottom to show ABC 123 etc.? Problem 2: Need t
-
Merge 4.1.1 and Win8 Bootcamp
I have a Win8 running in a training camp and want to use it with the merger. But I get:The Boot Camp partition is not prepared to stand as a virtual machine. It seems that Windows is not stopped properly the last time it was used.I tried to manually