C7280 when I try to install from cd, I get the message cannot find 7cS5B3C

Similar Questions

• When I try to install a program, I get the message the administrator won't let me do

  Administrator problems

  When I try to install a program, I get the message the administrator won't let me do. It's my computer. I am the administrator and no one else uses my computer. How to go beyond that and install the program, I need?            Allienne

  Hello

  Try right click on the setup.exe from the program - then run as administrator

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• When I try to restore my bookmarks I get the message "Failed to process the backup file."

  I lost my favorites and when I try to get back them, I can see the backup files in the recover window, but when I try to restore my bookmarks I get the message "Failed to process the backup file." Can help you? Thank you

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  original title: Security Center

  I had a virus to infect my computer but I'm to remove by doing the scans. I can't solve the problem of after-sales service. "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  Hello Barbaram1,

  Use the Windows key + R on the keyboard or click on start, select run.
  In the run box, type services.msc
  Click OK.

  Make sure that the Security Center service is enabled and started.
  Probably, you will need to click Start to start the service.
  The Startup Type should be automatic.  The status should be started.

  Let me know what happens. If the problem persists, it may be that there are residual questions of the malware infection.

  Councillor of State & progress.

  Maurice Naggar ~ MS - MVP

• When I try to save a document, I get the message "the file is opened by another program or read-only. I need to change the name to save him.

  When I try to save a document, I get the message "the file is opened by another program or read-only. I need to change the name to save him. If I optimize a document, I rename it to save it. If I opened a PDF file of the architect drawings and turn them into fashion landscape so that they are easier to read, I have to rename it. I searched on the parameters to look for something that I could turn off, but I found nothing.

  Make sure that the preview in Windows Explorer option is disabled.

• When I send a document to someone I get the message "Cannot send a document only to you to sign." I'm not send it to me.

  When I send a document to someone I get the message "Cannot send a document only to you to sign." I'm not send it to me.

  Hi Jerryg,

  On the Send tab, you can click Show CC and see if your e-mail address is displayed or not. If so, then delete it and then send the document. Also, I would like to know which browser you are currently using.

  Kind regards

  -Usman

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• When I try to install Flight Simulator, I get a message asking if I want to allow the program to make changes to my computer.

  original title: RealFlight G5 RC Flight Simulator

  I am trying to install a Flight Simulator, (RealFlight G5) manufactured by large aircraft.

  Great plans is an honest company and I have read nothing but

  good things about this product. "In any case when I'm trying to istall it after the message.

  you want to this editor, or what ever it is said, to make changes to your computer"

  nothing happens after you click Yes. A few seconds of the round circle

  When the memo pointer is then nothing. This has happened with other programs?

  Thank you.

  Hello

  Run the Fixit and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

  Hope this information helps.

• Try to install XBOX controller in Vista, error message "cannot find a volume for the extraction of the file. Please check that you have permissions required"

  When I try to download my xbox controller, it says cannot find a volume for the extraction of the file. Please make sure you have the required permissions. What - what this means and how I can solve it?

  * original title - cannot find a volume for the extraction of the file. Please make sure you have the required permissions. What this means and how I can solve it? *

  Hi pamelagreen,

  Be sure that you install the software as an administrator.  Right-click on the file and you should see the menu option here.  Also, make sure you have the correct software:

  http://www.Microsoft.com/hardware/windowsvista/support.mspx

  I hope this helps!

• Windows Defender does not work. When I try to turn it on, I get the message "not responding".

  Original title: Windows Defender

  I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

  Hi lskdjfoie,
   
  What have you tried to reinstall? Windows Defender or other programs?
   
  I suggest the following steps and check.
   
  Step 1:
   
  Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
   
  Step 3:
   
  If none of the steps helps create a new user account and check if the problem persists.
   
  Let us know
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Try to install Winzip but I get the message "f:\. 1397 invalid driver. "

  Original title: How can I fix - error 1397. f:\ driver invalid?

  How to fix my computer? I am trying to install winzip 15.0 and the following error keeps coming up "1397.Invalid f:\ pilot error." »

  Hi Benfarrugia,

  • When you get the above error message?

  Here are the steps to fix it.

  1. click on Start, click run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ Explorer\User Shell Folders

  3 in the pane right - see if it's all entries which has a F or any other alphabets not C (your folder OP) modify data of C:\

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

• When you try to initialize creative cloud app get the message 'no subscription found. ' What should I do?

  I'm the Manager of the team. We bought three licenses. I downloaded everything and when you try to open Adobe InDesign CC 2015 on my machine I received this message: I was connected when I received this message.

  "No subscription found.
  We could not find a subscription Adobe InDesign CC 2015 associated with this identification code Adobe you can buy a new subscription or if you do not have a subscription and are unable to access it, please contact Customer Support.

  You can also choose to start this product at trial.

  Have a different Adobe ID? »

  I tried to disconnect, then reconnect and nothing has changed.

  This document should be useful.

  https://helpx.Adobe.com/creative-cloud/help/manage-teams-membership.html