C769US, recovery boot, loads and works very well, but the next new start begins recovery... again and again

Well, the good enough subject line says it all.  Run you the recovery and everything works well. Can save a document or download the updates.  But when you stop and start (or restart after windows updates) nothing has been saved... it goes right back into recovery mode.

When I look in disk management in Windows Vists it tells me the drive the healthy and functioning properly.  However, when I run diagnostics in the BIOS it tells me that there is a hard disk with error code 10008 failure.  So what should I assume that the drive is dead? Said recovery reformats it, but like I said, do remember not or record programs or DATA.

I have recovery DVD and I downloaded the service manual and feel that I can replace the drive myself.  But I'm not sure I buy the right disc to install.  I read on this site that others have bought Western Digital, so if you think all that I need a new disc could someone tell me if this drive will work?

Western Digital - Scorpio Blue 250 GB internal SATA hard drive for laptops

WD hard drive you linked to should work fine in your laptop, just myself to order in the size of 320 GB.

Tags: Notebooks

Similar Questions

  • I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

    I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

    Is not possible. You'll need to use the Apple TV remote to turn it off.

  • I reently installed Windows 10 and had to re - install Photoshop CS2 Version 8. It works very well but he says it's a trial version how to activate it?

    I have recently installed Windows 10 and had to re - install Photoshop CS2 Version 8. It works very well but he says it's a trial version how to activate it?

    You can not activate Photoshop CS2 as long as obsolete Adobe product activation server. Instead, you will need to download a special version that uses a different serial number, and does not need activation. Note the serial number to the right of the product name. Your existing serial number will not work

    Download Acrobat 7 and CS2 products

    Hope that helps.

  • I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

    I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

    Migration/transfer of Adobe applications does not work.  You must install using installation files.  Uninstall, and then use the CS cleanup tool.  Then download/install the desktop application, connect and install applications subscription.

    http://www.Adobe.com/support/contact/cscleanertool.html

    Creative cloud to desktop
    https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

    Sign out, sign in | Creative office cloud app
    http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

    Help of activation & deactivation
    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

    Install, update, or uninstall applications
    http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  • I created an interactive navigation along the animated and imported and that the muse. Animations works very well, but does not have the interactivity. ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur

    I created an interactive navigation along the animated and imported and that the muse.
    Animations works very well, but does not have the interactivity.
    ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
    Anyone have an idea how I can fix this problem?

    Hello

    As you use the edge with muse file you do not put the full URL.

    Please try the code below.

    Window.Open("..) /.. /arbeiten.html","_top");

    Concerning

    ViveK

  • I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

    I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

    You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

    You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

    Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

    Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

  • My wrt400n worked very well, but since those days, as the internet continues to drop.

    My wrt400n worked very well, but since those days, as the internet continues to drop. My modem is all good and up and running. Its router just guard fall internet. SO I reset the router and thn it works. Pls suggest a soltuion. Its very frustrating and fiddles with the work.

    THX in advance

    How about if you change the settings of the router wireless. Change the width of the channel at 20 Mhz and select 9 as the standard channel under the 2.4 Ghz settings. For 2.4 GHz wireless security settings, you must set the security settings wireless personal WPA2 and AES as the encryption. BTW, you have problems in your laptop only, or with computers portable mutiple because if you don't have a laptop then you must try to update drivers wireless card from your cell phone.

  • Trapcode particular not showing on Render but works very well in the compose window

    Trapcode particular not showing on Render but works very well in the compose window.

    Hi do not know why it does not appear in my Render.

    My computer is not trolling, everything works fine.

    My computer specs:

    I7 - 5820 k

    GTX 970

    16 ram

    Composition window:

    Render:

    Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.

    The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.

    The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:

    If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera

    After a reset:

  • Download of Captivate to BC: works very well, but requires a connection on a single page

    I use sFTP to load a Captivate project to my BC site. It works very well, but why must my login BC run the course of Captivate.

    Thank you, Rick

    Hi Rick,

    Could you please confirm if it has been resolved on the cat?

  • I paid for creative cloud, photoshop works very well, but it won't let me register for lightroom

    I paid for creative cloud, photoshop works very well, but it won't let me register for Lightroom

    Lightroom must be installed through the creative Application of cloud.

    It seems that you have installed a perpetual license Version or a Trial Version of Lightroom. Uninstall versions you have installed Version 5, and then reinstall through the creative application of cloud.

  • In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

    In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

    I have the same problem with. Recording with my camera JVC Everio MOD files.

    The problem is that. MOD files. All thumbnails of film appears correctly.

    I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

    Can anyone help?

  • CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

    CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

    There are major problems with this page as shown in the screenshot below.

    This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

    I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

    Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

    Nancy O.

  • Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

    I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

    Hi unlucky2013,

    Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • WRT160N V2: Wireless works very well, but cable slow and intermittent

    Get speed and very good wireless connection.  But when I connect the ethernet cable, the speed slows down, and half the time I get error message "unable to connect".  I bought this router in Oct 2009 and so don't know if it needs a firmware update.  Based on other posts, I went to IE - Tools - Internet Options - connections - network settings and décliqués the only thing that was clicked: automatically detect settings.  That does not make a difference.  Yesterday, after some advice on another site, I changed ports on the router and it worked very well for a while.  But today, no port doesn't really realize.

    Try upgrading/re-Flash the firmware on your router.

    Connect to the computer with the Ethernet cable to the router.
    Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
    After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  • iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

    iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

    Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

    Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

    It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

    Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

    I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

    Anyone alse experinceing this?

    And tip on how to fix it?

    I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

Maybe you are looking for