C8000643-error Windows Update fails to check the fo updates

Similar Questions

• Windows Vista failed to check the updates, error 80070490, did he ran but the problem persists

  KB2679255 & KB2676562 installation problems. Look for day, but Windows Vista Impossible answer updates check updates, error code 80070490. Other updates to Windows Installer. Ran he made but problems persists.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Windows Update error 80070490

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• HI AGAIN! New app error/4107 CAPI2 failed extract of the updated third-party root list cab certicate invalid auto!

  I updated to windows startup and now I get the error above, never had this problem before and maybe because I had a few leaks of reg of viruses, they were all internet related as the strategies and settings reg keys? In any case how to fix or ignore I have no idea where to start? I had nothing else problems with Win7 64 lately every day something new which causes errors on my PC almost new Dell! I also had a few errors Windows update finally big update for media center something like ' Application WARNING 1130 .NET Runtime Optimization Service _ NET Runtime Optimization Service (2.0.50727.4927) - dependencies did not fit with the repository: mcplayerinterop "in Event Viewer. PLEASE HELP THANKS!

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Repost: See also http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=362066

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool from McAfee Consumer products again before installing updates AND BEFORE installing your new anti-virus application.

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  Welcome & thank you for your comments. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error Windows Update Database that can be 0 x 80070490

  Original title:

  Update of Windows, Java and some problems

  Hello

  My Java and Windows 8 will not get automatically updated.  When I go to all the work this symbol [[[comes in. I have updated Java, nevertheless a message shows to update when I put a cursor over any word of an open page of the internet. I have troubleshooted illustrated message"

  Error Windows Update Database that can be 0 x 80070490

  Miniport Wan (Network Monitor) # 2 has a driver problem

  Windows Update configured to never install drivers '  

  Some keys on the keyboard do not work.  How can I fix these problems?

  Hello Arif,

  Thanks for posting your query on Microsoft Community forum.

  If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

  Try it out below mentioned methods and see if it helps.

  Method 1

  Try to follow the steps mentioned in the article below.

  Windows Update, error 0 x 80070490

  Method 2

  Try to run the Troubleshooting Windows Update tool.

  This utility is used to and check if the network card and Windows Update services are running properly.

  Problems with installing updates

  Try other steps mentioned in this article if the issue that you are facing is mentioned in one of the mentioned option it.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

  Original title: WMP "can't play wav or midi.

  Using WMP 11 on Windows XP SP3.

  Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

  I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

  Thanks for your reply.

  I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

• 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

  1 error windows must now restart because the plug-and-play service terminated unexpectedly
  error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
  -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

  Hi nevil.fidelis,
   
   
  This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

  You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

  For additional help please refer to the following thread also:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  You can also check the positions of the TCD in the thread below on
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
   
  Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard

• An internal build error has occurred.  Please check the error log.

  All of a sudden today while working on a project, I got this error message in the issues window:
  
  "An internal build error has occurred. Please check the error log. »
  
  The background in the my application has been configured for white, now even that returns to the default gray
  
  Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
  
  Thank you

  After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.

  Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.

  http://tech.groups.Yahoo.com/group/flexcoders/message/69312

  http://tech.groups.Yahoo.com/group/flexcoders/message/68604

  http://tech.groups.Yahoo.com/group/flexcoders/message/62112

  http://tech.groups.Yahoo.com/group/flexcoders/message/61840

  http://tech.groups.Yahoo.com/group/flexcoders/message/57573

  http://tech.groups.Yahoo.com/group/flexcoders/message/51696

  http://tech.groups.Yahoo.com/group/flexcoders/message/41079

• Impossible to play a video file, error: Windows Media Player cannot play the file because the required video codec is not installed on your computer.

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  May be that the video file format is not compatible with Windows Media Player.

  Options: -.

  1] download and install VLC Player. It's free and supports file formats more than WMP.

  2] download and install the codecs

  Personally, I prefer VLC Player-if you have that then not need to download and install the codec of any third party.

• Windows 7 could not check the updates, error code 80072F8F

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi well I put the midi computer yesterday [am Windows 7] and I see a red x on the arrow of the notification, if it is not been on during a while they send me this if I need an update or I check myself if I don't want that I choose, just tried again and bounces back with this Code 80072F8F , Oh when he tried at 12:00 the pc wasn't on but gruff, a manual update would fix this, help thanks

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What other questions?  and Yes relevant noot, are guess you?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  PS: Read my signature

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPS represent or work for Microsoft