C8180: C8180 prints but nothing on the page

Similar Questions

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• The printer displays up to 40% print, but nothing happens

  Original title: I try to print from the laptop to the printer

  I try to print from the laptop to a lexmark 4650. It will show what it will print, she even wake up the printer and then show up to 40% print but nothing

  Hi goofy55,

  1. don't you make changes before the show?

  We recommend that you run the printer Troubleshooter and check the result. To do this, try the following steps:
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• printer has ink and looks like it is printing, but nothing is on paper

  I am trying to print on my printer HP photosmart Premium. She "acts" like printing but nothing is on the page. The ink cartridges are filled.

  You specify the model of your printer, but this issue seems to be pretty common with several models of the HP Photosmart Premium.  I saw no definitive answer.

  The printer ejects white of paper when printing sheets - a list of 10 "solutions" of HP who seem less and less relevant and more desperate towards the end of the list

  General HP Print troubleshooting suggestions.  Note that if you have not used the printer for a long time, it is possible that the print head is blocked.  Run the cleaning steps proposed could help - but they use a lot of ink.

  If the print head is really in bad shape, it might have to be replaced.  I wouldn't do it until everything else has failed.

  A thread on the topic in the HP support forum.

  You might find help here, although a quick search didn't turn anything--> http://www.fixyourownprinter.com/forums

  Good luck.

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• two face automatic printing both sides of the page, does not work. Why?

  I have a printer with auto print both sides of the page. It does not work. Why?

  Some printers require a separate duplex adapter must be installed in the printer. He might be able, but the part is missing. Additionally, make sure that you use the printer drivers printer manufacturers, not those provided with Windows.

  Is what printer model?

• I have a laptop wireless Officejet j4680 printer, but cannot access the "printer services.

  The wireless printer works fine, except that I am not allowed access to the "printer services.

  Hello

  What is the operating system installed?

  Download and install the complete operating system software of features appropriate for your printer. During execution of the tasks of maintenance on your printer, it is better to go in the HP, not the properties of the printer dialog window software.

  The following image use Dutch as a language, but it works for me. The HP Solution Center is where I align and clean the print heads. I print only to test the pages in the print dialog window.

  

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• look great on pc, but nothing on the real web, online, any help?

  look great on pc, but nothing on the real web, online, any help?

  just set up a test Web page, integrating edge animate, works fine on pc, but happens online, my server directory, what Miss me here, and if anyone can help.

  YES, AND THANKS FOR THE REPLY...

  Ive designed a file small edge and put it into Dreamweaver, called great f12, and it looks like the PC.  then, Ive tried to put all the files in the folders in my directory server and get the Web page not available, where the edge file is located on the page, don't know what im doing wrong, or what to do next... any advice.  Cheers.

• Equium L10-273: fan of CPU/HDD / lights come on but nothing on the screen

  I have an Equium L10-273 and had to put in a new power outlet in the mobo.
  I removed the wide and electronics. A friend of my put news on that to get back together.

  It sounds if the HARD disc / CPU fan / lights come on but nothing on the screen.
  Have unplugged the cable from the screen and he recovered but not good.

  Any suggestions welcome

  PS: A mobo out on a Toshiba Equium A60-155 will be mine?

  To me, this looks like a motherboard problem.
  In my view, replace the whole motherboard.
  But it s only my personal suggestion, if you want to be 100% sure what's exactly wrong with you laptop, then go you and technician of the notebook check.

  PS: Don't think that a card mother Equium A60 - 155 to insert in the notebook Equium L10-273.

  Greetings

• I have a Lexmark 2500 series printer but have lost the disc.

  I bought a new computer and I'm trying to reach my Lexmark 2500 printer but have lost the disc originally received with the printer, I tried to connect printer but I get a message re do not install the driver.   I'm afraid, I'm a novice PC user and I am completely lost as to how I can connect to the printer... Does that mean I have to buy a new printer or is there a solution out there!

  Go to the Lexmark support web site, you should be able to find and download drivers for your printer, it.

• HP CP4525DN print black all over the Page

  Hello, I have a HP CP4525 that prints black all over the page with the exception where there are printed words.  I reinstalled the fuser unit and tried to swap black ink.  It's a brand new printer from the box.  I have attached a picture of one of the printing as kind of hard to explain what the question.

  Any help would be appreciated.

  Edit - added an another attachment with the print quality test pages

  Has started sharing a printer of spare parts in another office.  Turns out be the formatter Board.

  Thank you.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.