C850 satellite will not connect at 5 GHz WiFi

My Satellite C850 found network 2.4 GHz Wireless and connected flawlessly. However, it is not 'see' the 5 GHz network, even if the router is in the same room and about 2 meters from the hotel. I have a problem, or in this laptop's wireless adapter will not connect to this speed? Any help appreciated, please

Hello

I think that the reason why your portable computer does not see the 5 GHz Wlan is simply.
The wireless network card does not seem to bear the 5 GHz.
The WLAN standard 802. 11A supports 5 GHz

If the wireless network adapter supports 802.11 B / G and N or 802.11 G and N, then only 2.4 Ghz are supported.

Tags: Toshiba

Similar Questions

  • My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

    My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

    Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

    Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

    Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

    The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

    Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

  • L850 satellite will not connect to Wifi

    Hi, new here.

    I have a Toshiba L850 which does not connect to wifi,
    Many other devices in the House and the L850 was last week.

    You can see my router but will not connect.
    It is the 'limited access' connection, but not more.
    Said troubleshooting couldn't identify the problem.

    When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

    Help.

    Paul.

    > He sees my router but will not connect.

    I guess that your router is secured by encryption (WEP or WPA / WPA2)
    Test WiFi connection without the use of WLan encryption settings.
    Turn off in the router settings and test the connectivity.

    Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

    Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

  • L750 satellite will not connect to the TV via HDMI and stops

    Hello

    When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

    I tried all the HDMI ports on the TV and the different HDMI cords without change.
    Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

    Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

    Is it possible to change/upgrade, that?

    All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

    Thanks :)

    You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
    The HDMI isn't limited to a certain TV interface.

    The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

    In your case, there is an open question about preinstalled system.
    Do you use the operating system preinstalled by Toshiba or did you change it in the past?

    If you have changed the system, the problem could be linked to the preinstalled graphics driver.

    However, my recommendation is simple:
    First of all I recommend you to reinstall the graphics driver.
    First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

    Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
    In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
    Now connect the laptop to the TV using an HDMI cable.
    Turn on the TV and then laptop.
    Shortly after, use the function FN + F5 keys to switch to the external video output.

    Good luck!

  • My C850 Satellite will not be closed after update Win8.1

    I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

    Please help because I'm losing my mind.

    Hello

    In my opinion, something was wrong during the upgrade.
    This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

    I recommend you do following:
    Set the computer laptop back to factory settings. Recover the laptop Windows 8
    Updated 8 Windows to the last State (all updates, patches must be installed)

    Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

  • C850 satellite will not start - black screen with mouse cursor while

    the screen while starting up is black with the cursor display white mouse - but won't start

    the computer is only 3 months with windows 8

    Please help me

    Thank you

    You mean underscore flashing/blinking in the upper left corner?
    It is above all an indicator of malfunction of the HARD drive.

    In your case, I recommend contacting the Toshiba authorised service provider because the laptop is 3 months old. In this case the warranty is still valid and you must have it repaired for free.

  • HP Pavilion Dv6 win 7 will not connect to the internet (WiFi Atheros AR9258 adapter)

    Spoiler (Highlight to read)

    Spoiler (Highlight to read)

    Hello.

    I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection.

    It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy.

    The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why.

    In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do.

    The only thing I have not tried to change IP address, because I don't have the Setup for this network and I don't know if this will help also.

    I appreciate all help. Thank you!!

    Spoiler (Highlight to read)

     

    Hi.I have a HP Pavilion Dv6-2110AX Windows 7 Home Premium and one a few days ago I had a problem with the internet/network connection. It was working normally and then, suddenly, just collapsed. I tried everything I know: System Restore, update the wireless driver (Atheros AR9258 wireless adapter - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48488.exe), reset the driver (I don't know if I did it right), but nothings helped to y for remedy. The only message I get I can't try something there: "Windows has not automatically determine the network proxy settings." I tried to do it manually, but it won't let me change any configuration in there, I don't know why. In the Device Manager, it indicates that the wi - fi adapter is not working properly and I can't access internet and network with my smartphone and 2 other computers at home, so I guess that the problem is not the router and I don't know what else to do. The only thing I have not tried was change IP address, because I don't have the Setup for this network and I don't know if this will help also. I appreciate all help. Thank you!!    

    MR. B

    Well well, after 1 month trying to get assistance from HP and after 2 weeks in this forum (thanks to everyone who saw the subject and tried to help ) I just gave up and did what I have done since I had the problem.

    My solution was to use the recovery discs to "Reinstall" everything and now the laptop is like when I bought it, but works.

    If you decide to do, REMEMBER to backup all your files before otherwise you goanna lose everything, because the recovery system returns your computer to the factory settings.

    The best thing is, it took less than an hour to do. If I'd known...

    Good luck people, c is the next time (hopefully not soon)... hehhehe!

  • WIFI on my C850 Satellite can detect the network but will not connect

    I just bought a satellite C850 - PSKCCA-02D00M

    The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

    All other devices connect very well as Iphones and Kindle

    In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

    I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

    Any help is welcome. I don't want to have to take back just for this issue

    See you soon

    Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
    Have you tried to reboot your router?

  • Satellite L500 will not connect WIFI (Windows 7)

    I bought a Satellite L500-01W002 running windows 7 for my son for Christmas and it will not connect via WLAN. I use a Linksys WAG54g router/modem. It connects fine via LAN and can see the wireless network, but does not connect. I use WAP-personal security with pre shared key and TKIP. I even turned off all security on the router and he left as an open connection, and it will always just connect.

    I have two Compaq running does not connect Vista connected first to the wireless network, but this thing just. I have uninstalled/updated / re installed device drivers and still nothing, it will be not just connect wirelessly.

    Please someone help me! I know you're out there!

    See you soon

    Hello

    Hmmm strange
    First of all make an update of the BIOS, that this should be done if a newer version is available and you have any questions.

    You said you did a update check WLan if you used the latest version of the driver
    Here you will find the latest WLan driver versions:
    http://APS2.toshiba-tro.de/WLAN/

    You can also check WLan card settings in Device Manager-> properties-> advanced settings WLan card.
    The same WLan channel must be used for the local network and router WLan card.
    Check if the MAC address filtering is not enabled in the settings of the router.

  • iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

    My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

    Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

  • How is it that my iPod Shuffle will not connect to my radio?

    How is it that my iPod Shuffle will not connect to my radio?

    Don't understand the question...  How you expect an iPod shuffle to connect to a radio?

  • iPad will not connect to internet

    Hello

    Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

    Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

    The two airports are configured in Bridge mode. Help someone?

    If you have LAN - 502T running as the main router.

    Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

    The two AE connected directly to the modem or the other?

    I would recommend the static method of intellectual property.

    https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

    In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.

  • Printer will not connect via USB

    HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

    Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

    The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

    Hi Rmhodgson,

    Run the following utility below.

    http://support.HP.com/us-en/document/c02073861

  • HP Officejet 6500 a: printer will not connect to the wireless network.

    I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

    Anyone has any ideas that might help before chuck it and go and get a new one altogether?

    Thank you.

    Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

    If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

    If OK, go back and add WPA2-AES with your simple password.  Status now?

  • My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

    My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

    What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

Maybe you are looking for

  • Problem with SlingTV through Airport Extreme?

    I have a Motorola SB6141 cable modem, internet of Time Warner and an Apple Airport Extreme Base Station (later) for my setup. While SlingTV is not a great service, it was $ 20 a month and gave me what I need and has been much better than that Time Wa

  • Windows malware removal tool (February) install failure

    Monthly. I would have to wait until this installed, but cancelled after waiting half an hour. Now marked "failed". -I clicked on the icon to try again. No results. * One I don't have a chance?

  • drive hard 500 GB showing 465 GB

    my new is500gb to drive hard, but after the XP installation window, I found the new HDD are showing only 465 GB. Why it doesn't show 500 GB. Where the 35 GB went. Please help me get back the same... My setup is ASUS P8H67-M LE WITH INTEL i3 PROCESSOR

  • How to create a scrolling region.

    I want to create a scrollable area containing the text. text is scrolling in the area and also shows the scroll bar. I used the code, it works fine on IE and Mozilla on the desktop but not in the following mobile browser. Scrolling text... How can I

  • Problem with windows search in Google Drive folder

    The windows folder search function does not work in my google reader account. It works in the directories, but not the google reader folder. I turned on indexing in the folder, and my user account has full access read/write/execution as well. Otherwi