C870-191 satellite - how to start on a CD or a USB key?

Similar Questions

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• results after you start the netbook with the bootable usb key

  do you do after you make the bootable USB key and start your netbook and just windows 7 Professional can't choke and it want let me to upgrade or to perform a custom installation?  & What drivers should I install?

  If you want to upgrade your Netbook Windows 7 Starter to Windows 7 Professional, you must use the upgrade wizard Express Windows as well as the key to Windows 7 Professional.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• How to record the recovery of BitLocker on USB key code?

  How to record the recovery of bitlocker on my USB key code?

  Original thread: BitLocker

  Hi, nurse,.

  If I understand correctly you want to activate the Bit locker on your computer and save the recovery on USB code.

  Please follow the steps below to do so:

  1. Press Windows + X, and then select Control Panel.
  2. Click system and security, and then click BitLocker Drive encryption.
  3. Click on turn on BitLocker for the operating system disk. BitLocker will scan your computer to make sure that it meets the requirements of system for BitLocker. If your computer meets the requirements, BitLocker informs you of the next steps that should be adopted to enable BitLocker, such as preparation by car, turn on the TPM module and encrypt the drive.
  4. Secure once the TPM is initialized, the BitLocker Setup Wizard prompts you to pick how to store the recovery key. You can choose 'Save the recovery on a USB flash drive key' and follow the instructions on the screen.

  Hope this information is useful. Please let us know if you need more help with Windows, we will be happy to help you.

• Satellite L300, how to start from the cd/dvd external USB drive?

  I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
  I would like to start on a connected external USB CD/DVD player
  PROBLEM:
  BIOS will not start on this CD/DVD disc.
  In the BIOS boot priority is: CD/DVD, USB, HDD
  BEHAVIOR:
  When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
  QUESTION:
  Is it possible at all boot for CD/DVD USB external?

  Thanks for the efforts made to respond.
  Concerning

  It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

• How can I save the photos on a USB key

  I scanned a few photos and I need to save my friends - how I do on USB

  Put the USB into the USB port and wait for what he could be detected. Now, you can treat it as a folder on your computer and can drag and drop or copy / paste things as you want.

• How to create a complete project on a USB key (for use with another PC)?

  Hello

  I would like to create a comprehensive project on a 128 GB USB key (for use on another PC) key?

  Do I have to use a HARD drive?

  Thank you

  Pol

  Windows 7.

  Pol

  What version of Premiere Elements on your Windows 7 (64 bit alleged)?

  Have you explored creating your project on computer 1, then Menu/files archiving project, and his choice of copy a project.

  Then you transfer the file copied this process to a USB Flash drive and then use the USB

  Lead them to computer 2.

  In computer 2, open the folder copied, right click in the copy of the project file in the copied folder, select open

  With, followed by Adobe Premiere Elements (version number).

  If you check in a project with Menu movie, then go over and look at the following

  http://atr935.blogspot.com/2014/07/pe12-archiving-projects-with-disc-menus.html

  For any question or need more information on all the above, do not hesitate to ask.

  Thank you.

  RTA

  .

• How to save a converted file on my USB key?

  I'm just trying to save a file converted to my flash drive. I can do this in one or two steps?

  Hello David,.

  As you said on the previous version, this means that you are using Adobe Reader.

  When you convert a file to PDF format, you will find a prompt on your screen asking you to view the file in the player, as shown below:

  

  You can open the file in the drive and save it to the location desired or locate files converted from your online account and then download (must register on the first downloads folder).

  The file you are trying to download can be large, that's why it is compressed in the zip file.

  No problem, you can just unzip by right clicking on the icon of the file and extract it in order to get them back in the PDF format.

  In addition, you can check with other files as well if they convert in PDF or not.

  Kind regards

  Ana Maria

• How can I install Windows 8 on a USB?

  I downloaded and installed Windows 8 on a virtual machine, and virtual machine software refuses to let go of my 3D display driver, not allowing not my laptop switch to 3D mode (has a 3d screen) until after I reload.

  How can I install Windows 8 on a USB key, that way I can start directly in this USB?

  When I run Setup of the computer windows 7, it wants to install Windows just 8 and does not have the ability to install on USB. When I run the Setup program on Windows 8 VM, he just wants to do the same, install Win8 on the virtual machine and does not give the option to choose a disk to install on.

  I can make the USB bootable and have put the image ISO of Windows 8 on it, and start since that does not allow me to install on the USB stick (player 1, it only shows drive C: (disk 0) on the laptop).

  I would like to have windows 8 bootable from the USB key, so it wouldn't mess up my windows 7 current computer until I can get everything fully backed up and have more time to play with it.

  You can not, Windows 8 must be installed on an internal hard drive attached. Only Windows 8 Enterprise supports Windows To Go that allows you to create a portable copy of Windows 8 on a USB key. Windows 8 Enterprise Edition is only available to volume license customers.

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  Hello George,.

  I could not find this model number on the Toshiba site, so I suggest that you look at this page as a place to start your search: http://support.toshiba.com/drivers . They had a driver for a webcam, which is perhaps what you are missing. But in all cases, the Toshiba site is where you are most likely to solve the problem with the help of your webcam.

  Let me know if this helps you.

  Kind regards

  BearPup

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Satellite T130 - how to start HARD drive recovery?

  Hello

  Windows 7 was not working properly and I tried to reinstall. However, after the installation, it starts but it does not complete the process and maintains the pc shut down before I could use it. I can now use it just because I installed Ubuntu and I can also access all other partitions of Ubuntu, one that contains the HDD Recovery folder.

  Can I reinstall windows from this folder?

  I see that someone else already managed, using stormwater management files as the link below shows
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thank you

  Andrea

  Hello

  You are still able to access the start menu in Windows or Ubuntu installation has been removed and the Windows boot loader?
  If so, you are not able to start the HARD drive recovery more

  Why? It is very easy: even if you are able to access the files, you can start this feature because the original Windows Start menu of the preinstalled Windows system is necessary to start the HARD drive recovery feature.
  So in this case, you need the recovery media (USB key) that you created using Toshiba recovery media creator.

  Of course, this could work without installed Windows, but there is no guarantee for this.

  But why I m telling you this information? You can find everything in your owner's manual ;)

• How to start Windows 7 system recovery?

  Hello

  I have a Toshiba Satellite laptop computer Pro in windows 7 that crashed with what I've said is a bad blue screen with white text hordes.
  Recovering laptops in the past for me and others in the past, but am stuck bigtime, as theres no recovery disk or whatever it is.

  Have you tried many methods, but to no avail. How can I fix this please?... I briefly looked at the Toshiba site, but looking at what, in my view, could be the cure, might be the wrong thing to download...
  Thank you

  Hello

  How start the recovery, the installation is described in s manuals this document can be downloaded from Toshiba support download page http://eu.computers.toshiba-europe.com

  How to start the installation of HARD drive recovery is described in the follow-up paper - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If you have any other questions let us know.

• Satellite L40 - no start

  I have a month old Satellite L40-17s. Now when turned on I had a completely black screen with just the white arrow on the screen pointer. NOTHING else. When I turn off, the power LED flashes orange - which seems to indicate that the computer has been in mode 'sleep' (slowly).

  However, turning on wakes up NOT he. Tried to turn and several times. Absolutely nothing - just a black screen and won't start. The Green drive light flashes that I press the power switch.

  Any ideas on how to start up again?

  Hello

  Does not sound well :(

  Before you call the ASP in your country, try this:

  -Unplug the power adapter
  -Remove the battery
  -wait about 20-30 min
  -reconnect the battery and the AC adapter
  -try to start the laptop

  If this doesn't help not using ASP would be needed!

  Good luck