Cable for T320 8x3.5 to Perc H710

I have a T320 with backplane replaceable 8x3.5 SAS drives hot. I ordered a Perc H710 (p/n 342-4203) to replace the H310. The SAS cable has the wrong connectors for the H710.

I chatted with Dell this morning and they told me that I needed the manufacturer Dell cy7n1. I ordered this. However, after ordering, I searched online and the images seem to show a cable with only one connector at each end.

What is the correct cable I need?

Thank you.

Hello

CY7N1 is a cable to connect to a backplane 4HDD. Background cable basket of 8HDD is DJXF7.

Thank you

Tags: Dell Servers

Similar Questions

  • Any HD (almost) for T320 w / good H710?

    On the T320 w / 8 Bay hot swap and controller Perc H710...

    Can I use any SATA or SAS disk without any problems? I mean they must be good enough to be used in RAID etc but I mean the Dell is going to want readers only Dell? The reason why I ask is that I already have some readers in the House, or want to add later.

    In addition, since I'll order 2 SAS drives to come with her, are all the other empty bays is going to come with hot-swap trays HD so that I can mount some HD inside later?:

    "Can I use any SATA or SAS disk without any problems? I mean they must be good enough to be used in RAID etc but I mean the Dell is going to want readers only Dell? The reason why I ask is that I already have some readers in the House, or want to add later. "

    You can use the hard SAS or SATA drives, but which ones do you use can determine whether or not you have questions.  Do not use consumer/desktop/computer portable readers.  Enterprise class disks must serve at least.  Certified discs are recommended for maximum reliability or if you ever need Support Dell for help troubleshooting problems related to storage.  Generic/non-certified retail company records can also be used - usually without problem - long as your team is capable of solving the problems of storage/RAID.  Some readers of credits and retail have been tested by the drive manufacturers to be fully compatible (for example, WD RE4), even if they are not considered 'certified' or guaranteed by Dell.  If purchase of authorized discs Dell, you do NOT have to pay the high price of purchase directly from Dell... they can be purchased from a number of distributors/suppliers online.

    "In addition, given that I'll order 2 SAS drives to come with her, are all the other empty bays is going to come with hot-swap trays HD so that I can mount some HD inside later?:

    No, not configured disk bays will come with white, not empty/caddies carriers, so you can buy carriers of both providers (or disks).

  • R320 substituting PERC S110 for a PERC H710 - without loss of data

    I think of his replacement (added?) a H710 PERC our R320.  The vehicle currently has a S110 (software raid controller?).

    Play safe I'll have a complete bare metal backup.

    Is it possible to add a PERC H710 with my original two disks in RAID 1 and do not go through a complete reinstallation or backup recovery?

    It would make life so less irritating...

    Thanks in advance!

    Sincerely,

    Chris H.

    Hi cmhippy, yes you certainly would need back up you data, it is not possible to transfer RAID configurations of a software to a hardware RAID controller RAID controller.

  • PowerEdge R320 cable for SATA?

    Hi all

    I recently bought a new (ok, almost new 'store') R320 server, that happened and seems to be wired to the SATA drives (non - hot). No hard drives have been included in the system - I was aware of this ;-)

    I also have two Dell 2 TB NearLine SAS / 6 GB/s / 7.2 k / 3.5 HD ... so my question is, what exact cable I need to buy & replace, so that I can use these SAS drives in my system which is already wired for SATA?

    What I read, the controller integrated PERC H710 supports SATA and SAS, then is it just a matter of buying the SAS cable and its connection to the SAS_A on the H710 port?

    Thanks in advance

    -Patrick

    My apologies. Discover one of these reference numbers:

    XP00F & H3YKR

    They should be available in the United Kingdom.

  • PERC H710 options

    Just got a PowerEdge T320 with controller Perc H710. There are a few configuration options undocumented in the help manual, or online. Cannot find anything on the web as well. It is "set the speed of the link to G3" and "Disk Cache". What are doing? And how to configure them, taking into account that the server will run Windows server 2008 R2?

    Simon

    Probably best to leave 'Disk Cache' disabled... the controller uses a battery backup cache, so if the system loses power, the unwritten data is kept in the cache.  Disk cache HARD disc has NO protection, so if the power is lost on the server, data not written to the disk cache will be lost, causing corruption.  This should be used if you have taken extraordinary measures to ensure that the system never loses power (or the integrity of the data is not critical).

    I can't that guess the 'Set Link Speed to G3' might actually be 3G, which means she restricted protocols of flow to 3 Gbps (SATA II/SAS I) instead of the 6 GB/s (SATA III/SAS II) that he is capable of.  If you use the appropriate drives (SAS or enterprise SATA II/III), there should not be any reason to enable this, because it's probably a compatibility setting for SATA I / II of readers whose speed cannot be used correctly with the controller, but if you use decent readers, that shouldn't be a problem.

  • PERC H710 downloads?

    Page drivers and downloads for my T320 doesn't seem to understand anything for the Perc H710 RAID controller I.  I searched Dell support site and did not find a relevant page.

    Where can I find updated firmware to date and any other software that I might want to use to keep the controller to update?

    Thank you

    Andrew

    They are under SAS RAID.  Here is the firmware:

    http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-T320?driverId=DK9F9&osCode=WS8R2&FILEID=3188832303&LanguageCode=en&CategoryID=SF

    What OS?

    Keep the OMSA (OpenManage Server Administrator) to update will inform you when the firmware/drivers are obsolete:

    http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-T320?driverId=CWHRG&osCode=WS8R2&FILEID=3267736217&LanguageCode=en&CategoryID=SM

    (Download and run to extract the files, and then run C:\Openmanage\windows\setup.exe, add yourservernameoripaddress:1311 to the Intranet Zone of IE).

  • Disabled option to create new VD - PERC H710

    I have 5 x 1 TB SATA RAID-5, works very well. My goal is to add new SAS drive 2 x 3 TB RAID-0 having.

    Two issues I found.

    1 - new record added shown State as foreign menu PD Mgmt.

    2 - the 'Create new VD' option is disabled or grayed out. Why?.

    Thank you.

    -Type of server Dell PowerEdge R720

    CONTRL - RAID PERC H710

    1. the foreign configuration must first be deleted. VD MGMT, F2, foreign, clear.

    2. create is disabled because the disks are foreign and not available for use.

  • Divide a virtual disk in two virtual disks PERC H710

    Hello guys,.

    -We have a server PowerEdge R720 with a PERC H710 Mini storage controller which has 8 drives 1 TB each of them.

    -We have created a virtual disc, which includes 8 physical disks configured in Raid 5.

    -We have installed Windows 2008 Server R2 and we got 4469 GB no allocated space that we cannot use due to the limitation of the disks of the Basic.

    What we really want to do is reclaim the unallocated space of the existing virtual drive and put it in a new one, so that we keep 3 disks for the virtual disk 0 and we use the 5 others for the new virtual disk 1.

    -Is that possible without destroying the data we have?

    -Help please!

    Thanks in advance and sorry for the bad English :(

    Unfortunately, there is no way to do it without restarting.

    Option 1

    What you have described, you could divide drives upward into distinct from VD, leaving a 2 TB or smaller for the operating system.  It will cost you a value of an extra disk to disk space (VD0 RAID 5 = 2 TB, VD1 RAID 5 = 4 TB).

    Option 2

    You can create "slices" on the disks - you still all 8 disks in a disk group, but you would cut a smaller VD for the OS, and then the rest of the disc space can be a VD for data (each VD will appear as a "separate" disk in Windows, so the second VFD can be converted to GPT and be as big as you want While the first VFD remains an MBR disk to boot into the operating system in BIOS mode.  This will give you return a value from an extra disk to disk space over Option 1 (VD0 RAID 5 = 100 GB, RAID 5 = 6.9 to VD1).

    Option 3

    You can switch mode UEFI, create a VD with all 8 disks (as you did), convert the GPT disk, then install.  UEFI is necessary at the start of the GPT disks and GPT is required for disks larger than 2 TB.  It would also keep 7 TB of usable disk space.

    You can also consider a RAID 6, if you can accept the value of another drive 1 TB of disk space.  Since a reconstruction of the drive may take 1 to 2 days or more, a RAID 6 would provide better tolerance to failures and protection during the vulnerable period that the disc is out of line or reconstruction.

  • should my time capsule be connected with a cable for backups, after the initial installation?

    should my time capsule be connected with a cable for backups, after the initial installation?

    If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

  • Need cable for Tablet P3500, use the recovery CD

    I have a Tablet from Toshiba P3500 and map an external cd drive of rom with the 32-bit bus cable to connect, but the recovery cd requires 16-bit card bus card which, if I had one, I've lost.

    What is the part number for a 16-bit bus pass card and cable for my tablet, and where can I buy a.

    The Tablet is about 2 years.

    TIA
    Mac

    Hello

    The reference is PX1056E-1NAC.

    Nick

  • Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

    Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

    What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

  • What is the point number (spare part) protects cable for ILÇE-7RM2?

    What is the point number (spare part) protects cable for ILÇE-7RM2?

    I'm looking for this part:

    http://Helpguide.Sony.NET/ILC/1520/v1/de/contents/image/b_cableprotector.PNG

    Thank you

    Michael

    I discovered, that it is the part number:

    Cable protector: X-2591-933-2

  • Need of touchpad ribben cable for Equium A200 - 26 d

    Need touchpad ribben cable for Toshiba Satellite A200 - 26 d, on cable reference number: NBX00004G00

    Any ideas please.

    p. s.

    I tried google and ebay

    Hi mate

    Compatible and supported Toshiba laptop everywhere could be ordered in a Toshiba ASP in your country.

    Here you can find the database with all FSA worldwide:

    http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

    Welcome them

  • ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK

    I CAN'T ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK. PLEASE HELP ME.

    Hi AR7, welcome to the Forums of HP. I understand that you can not connected to the Internet. HP offers no support for this configuration, as a result, here's the method to connect to a WiFi network.

    Connect to a wireless (Android KitKat, Jelly Bean)

  • camera / computer cable for PowerShot A1100 IS

    need to reeplacement camera / computer cable for PowerShot A1100 IS - no available on the Canon Web site - do not offer Office Depot where I bought the camera

    Hi watson1943!

    Thanks for posting!

    The specific cable supplied with your camera is currently unavailable on our website.  However, the cable is a standard type of cable that can be found almost everywhere.  Both an end has enlarged type connector and the other end has a mini type B connector, it should work.  You can try one of your local electronics retailers to see if they have such a cable in stock.

    It has not responded to your question or problem? Find more help contact us.

Maybe you are looking for