% CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported
Hi all...
I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported
Hello DialerString,
I fear that the ACL is not related to the question, so I expect not to see anything in the debug output
Hope to help
Giuseppe
Tags: Cisco Network
Similar Questions
-
Failed to add the service to the grey button vRA 6.2 Catalog Management-Add
Hello
I have published action plan, and now I need to publish it on our catalog, I am creating a service (Administration -> catalog -> Services Management ), but the + Add button is grey, I am connected with the role of Manager/Director of Group Business.
any help would be appreciated.
Please see att.
Kind regards
Preet
The client administrator must be able to create the repair within catalog management. While business group Admin can make management of catalog objects to the title of existing services but don't get creative features, is why your BG Admin to add gray button.
Are you sure that the name of user and password that you used is associated to customer Administrator role?
To do this, you can do is compliant, wide system ([email protected]) tenant in default url administrator connection.
Select your tenant in the list and edit, check in the third tab allows you to see if the account that you refer as tenant Admin is added under the customer Administrator role or if you are using groups to assign roles, please make sure that the user account is a member of the right-wing group.
-
Failed to add the service account to the pdf generator
Hi guys,.
Pourrait any assistance on the question I receive.
I am currently working on a production server and adding a service account to the pdf generator and I get the error message: "the user account is not valid for the computer.
I can't connect to windows with this fine account.
Is there a group policy or and rights must be changed to fix this problem?
Please advise,
Thank you
Hi Venky143,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forum. Please post your question in the Windows Server Forum.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
In addition, you can post your question in the ITpro forums.
Thank you.
-
WS-Security and proxy service: failed to add the identity security token
What the reason of 'Unable to add the identity security token' fault in this situation (10.3.1):
I did a simple proxy service "hello word" and tried to link custom policy.
WS-Policy is planned:
< wsp WSU: ID = "WS-Policy-Siebel.
xmlns:SP = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702".
xmlns:WSP = "http://schemas.xmlsoap.org/ws/2004/09/policy".
xmlns:WSU = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
< wssp:Identity
xmlns:WSSP = "http://www.bea.com/wls90/security/policy" >
< wssp:SupportedTokens >
< wssp:SecurityToken
TokenType = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken" >
< wssp:UsePassword
Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" / >
< / wssp:SecurityToken >
< / wssp:SupportedTokens >
< / wssp:Identity >
< / wsp >
Process of WS-Security is set to "yes".
During debugging, I see that all works fine - I can authenticate with the defined credentials and breakpoints in the proxy stream service works very well.
But in the end, I get the error:
SOAP fault:
< env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
< env:Header / >
< env:Body >
< env:Fault >
env:Server < faultcode > < / faultcode >
< faultstring > cannot add the identity security token < / faultstring >
< / env:Fault >
< / env:Body >
< / env:Envelope >
In the console:
< 09.06.2010 17:39:18 MSD > < error > < OSB security > < BEA-387023 > < an error occurred during the processing of incoming web service security response [error code: F]
[Ault, message-id: 1721282272521583996 - 57dc4ccc.1291cc2282d.-7fab, proxy: OSB project WS-Security/WSSecurityService, operation: NewOperation]
-Error message:
< env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > United Nations
able to add the identity security token < / faultstring > < / env:Fault > < / env:Body > < / env:Envelope >
weblogic.xml.crypto.wss.WSSecurityException: failed to add the identity security token
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. check the log file full stacktrace
Incoming soap message is:
< soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
< xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
< wsse: Security SOAP: mustUnderstand = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
< wsse: UsernameToken WSU: ID = "unt_TNNp0cBwU7HyPKoq" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
< wsse:Username > testuser < / wsse:Username >
< wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > testuser < / wsse:Password >
< / wsse: UsernameToken >
< / wsse: Security >
< / soap: Header >
< soapenv:Body >
< wss:NewOperation xmlns:wss = "http://www.troika.ru/Enterprise/WSSecurityService/" >
< in > chain < /in >
< / wss:NewOperation >
< / soapenv:Body >
< / soapenv:Envelope >
Edited by: L. Andrey on June 9, 2010 17:55You are the WS-Policy liaison to the entire operation or only for the query part of the operation. If you link the WS-Policy for the operation, the policy applies as well to the request and response. If the response message also contains the WSSE headers with a name of user and password invalid. You can check this?
-
ORA-01994: GRANT failed: failed to add the users to the public password file
Snoussi,
our applications 11.5.10.2 and db 9.2.0.6 whenever I'm in the process of grant dba privileges to rman user sys, I get the below error
ORA-01994: GRANT failed: failed to add the users to the public password file
I created the password file and I've changed remote_login_passwordfile = NONE for remote_login_passwordfile = EXCLUSIVE lock
in initSID.ora then I bounced DB but its showing again.
SQL > show the distance parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
real chain of remote_archive_enable
remote_dependencies_mode string TIMESTAMP
remote_listener chain
Remote_login_passwordfile string NONE
REMOTE_OS_AUTHENT boolean FALSE
remote_os_roles boolean FALSE
SQL >
Here is my information in initSID.ora file.
----------------------------------------------
#############################################################################
#
# END OF THE CBO SETTINGS SECTION
#
#############################################################################
#---FIN OF REQUIRED OPTIMIZER PARAMETERS-
#
# Client settings.
#
Remote_login_passwordfile = EXCLUSIVE lock
#EMOTE_LOGIN_PASSWORDFILE = exclusive lock
IFile=/U05/Oracle/visdb/9.2.0/DBS/VIS_linux2_ifile.ora
[oracle@linux2 dbs] $
Published by: HumanDBA on June 9, 2009 04:06Danny,
Do you use a spfile to start the database? If Yes, then you must change this setting in the spfile so (issue "show the spfile parameter' to check).
Kind regards
Hussein -
Failed to add the shared member
Hello
I get the following error message when I'm loading members at my request of essbase. I chose option 'Allow duplicate Shared Members'.
Any suggestions to fix this please (without renaming shared members)?
Error message: failed to add the shared member (CM): a duplicate member is in outline, but it is in another dimension.
Concerning
ChandraYou can only add members with the name or alias from another dimension, even if the names of the members in double is enabled. I do not recommend this. This problem often arises because you have the same name in several dimensions. Like other having to product and customer and division. We generally get around it by prefixing or suffixing the names in a dimension with something like prod others, cust-other, div-others. Pourriez you either prefix the entire generation by using the prefix option in the rule of load or for some names of members by using the option to replace the rule of lod
-
Windows search Windows failed to start the service on the Local computer
OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...
I'm on Windows 7 Professional 64 bit
UAC is set to the lowest level 2The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):
Windows cannot find ': search query = cmd'
I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:Windows search Windows failed to start the service on the Local computer
Error 161: the specified path is not validThe event log showed me this Application error:
Cannot initialize the Gatherer service.
Details:
The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
Help!
Thanks Samhrutha.
Your proposed solution of editing the registry is the only solution I found to this day and still work.
The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search. Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.
Only recently, however, discovered one other cause possible/fix to this problem.
Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.To resolve this problem, simply tell windows search not to include the 'network' location in the search index. To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)
After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window. After that the error message should hopefully not return. If so, try restarting the computer and research to test again.
Hope this helps!
:)
~ rx
-
DSC error: IAK_SHARED failed to start the service
When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service. I'm using LabVIEW 8.6 with DSC 8.6. I tried to run one of the examples (the example of the heat exchanger). Any ideas? I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC. Shall 8.5 DSC be uninstalled everything first?
Thank you
Tom
Hi Tom,
This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.
Gregory C.
-
Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?
PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
(Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)
-
Can't remember password option not fails to add the site to the list of Exceptions
In Firefox 24.0, I visit a Web site and enter the name of user and password. Popup asks me if I want to remember the password. I select never save password for this Site. I logout and log back plug-in software component. After you have entered the name of user and password, I still wonder if I want to remember password.
Privacy tab: always use incognito mode is disabled
Security tab: when I click on Exceptions, there is nothing displayed in the popup window
How can I get FF to add the site to the exceptions list so that it stops to ask if I want to remember password whenever I visit your site?
Figured it out. Seems the https sites are treated differently in the newer versions of the FF. To the left of the address in the address bar is a key. When I click the button, it asks if I want to remember the password. If I choose to never remember the password, it will then add the site to the exceptions list.
I of course can't see anything on this new feature when I searched the support before entering my question. Is there a web page that I forgot?
-
When you click on the link below, firefox will move the site but a notification that it cannot check the secure connection to the user. Technical details the certificate is not valid (no other useful information here) and the button "get out me of here ' reveals a screen where there is a message saying the certificate is valid and is not necessary to add an exception. All buttons are greyed out and thus preventing access to the site. No overrule or any other method works, so we (= society) are forced to use another browser to access our suppliers e-learning environment. I tried to change the two flags in topic: config, but apparently those who are depricated because they affect behavior. (browser.ssl.override_behavior and browser.xul.errorpages.expert_bad_cert) - edit: apparently the link falls. Here is the link: https://wbt.progress.com/
There is an intermediate certificate missing (GlobalSign organization Validation CA) who is not sent by this server.
If Firefox has not saved it to move to another site in the past, then you will get the error unreliable.
-
Failed to add the network printer
Hello
We have a client that connects to our ERP system to print orders. They connect through a VPN site-to-site and then access our system through an RDP connection to a server 2008R2 instance. The printer is a HP LaserJet 4100tn
When I first set up in the spring I was intending to use the easy print with the redirect to printer driver to print orders. However exceptionally slowly printed orders and I was not able to determine why. Instead I've implemented their LaserJet as a local printer on our desktop server remotely using a HP LaserJet 4100 Series PCL6 driver. It worked perfectly, and they have been printing without problem until yesterday.
Yesterday for some reason any printer stopped working. On our Remote Desktop server, it appeared as grayed out with an exclamation mark above. I did the following diagnosis:
> They can print from their own local office it
> They changed and turn it on again
> I can ping the printer from our server OK
> I can get on the web interface of the printer OK from our server
> Restart our server remote desktop
> Turn off the Windows Firewall on the Remote Desktop server
I therefore decided to remove the printer and add it again. I go through the configuration wizard Windows printer usual choosing to do a new TCP/IP port, but when I put the IP address of the printer in Windows says that it is not the printer on the network (photo attached).
I tried to delete the printer port which has been associated with this printer and remove the driver but Windows still won't "see" the printer.
I am able to configure this printer on other servers from RD (2003 and 2008) and I also tried setting up on an old XP box, I had to hang out without problem. Curiously, it seems only that this server is the only one that I can not set up the new even if it can ping the printer OK.
I found a troubleshooting printer HP hereWeb page but who was no help, and the software does not work on Windows Server versions.
Don't know what to do next!This was solved by changing the IP address of the printer
After changing the IP address, I was able to add the printer to the server OK.
I wasn't able to find out why this is the case, but guess it is some incorrect IP or the information stored in the registry.
-
Failed to add the key to unlocking C90
My apologies in advance if this has been addressed.
Press release by e-mail from TAC... downloaded and installed TCNC7.3.0.8cb420c
Diagnostic reports lack the release key, click on "add the unlock key valid."
.. .field for adding release button nowhere to be seen...
What missed?
Thanks in advance intelligent people.
You used the wrong software version of TC, you used TCNC watching your orginal post and the screenshot, one where you requested the release key shows that you use the TC without the "NC".
TC software uses encryption.
Software TCNC does not use encryption.
-
Failed to add the key to unlocking a Cisco C60
The codec has been upgraded to TC 6.2.1 and it keeps giving an error-
CRITICISM:
Valid unlock key
Key missing for TC6.2.1.69d401c release. The system will not be able to make all the calls. Please Add a unlock key valid.
When I add the key to liberation, it is said
Added unlock key.
A
It takes to the unlock key is taken into account.
I rebooted the device and I did it a couple of times already, but he came back with the first error - no release key.
any ideas?
Lavanaya-
I looked at your serial number (https://cisco.com/go/license) and noticed that the software is TCNC, which as described Martin does not support encryption. You can check which version of the software you downloaded to the codec, you can check by going to the maintenance > Software Upgrade on the web interface of codec. You should see something like the following: software version is TC6.3.0.3d8e7d1. You can also look on the codec itself if you have direct access to the information system.
-
Failed to add the custom library group object?
I recently upgraded computer and reinstalled Livecycle on my new computer. On the new computer, in Livecycle, when you try to add a custom library of objects, object I get the following message:
"Cannot add the object"name"to the Group of the library."
I checked and made sure that in the properties of the group, all items "allow objects...". "are checked. The location of the libraries are in my file C:\Program Files (x 86) \Adobe\Acrobat 10.0\Designer 9.0\EN\Objects\ . Any idea what's going on? It will be a huge setback for me! I have to update the custom very often my objects.
Thanks in advance.
All of a sudden it just started working. Don't know what happened.
Maybe you are looking for
-
QuestionI can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows
-
whenever I have try to defragment my laptop restarts, I don't need to defrag because my system is slow
-
OfficeJet Pro 8500 a909g: lost after upgrade windows 10 Scan function
I saw many older posts on this topic (device connected to another program or device) and have waited and waited to see if finally HP allocate updates to allow the HP Solution Center work again for analysis, rather than having to use the very limited
-
Wrong date. A day off. Does not take into account leap years.
We don't want the date on my iMac. It is a day of rest. On March 3, it shows March 2. Of course, it didn't take leap years into account. When I tried to change it after you have unlocked the date/time, he wouldn't let me to change the date. It is aut
-
HP TouchSmart 600: seconds in any medium beeps stop two enviro
PC has been dying slowly over time... it's finally in a State that I am allowed to touch. There are no more than 20 seconds in any environment. Diagnostic PC is there but don't stay up long enough to run anything. Get a little difficult at this stage