"Cable not connected to the network adapter.

Similar Questions

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• HP Pavilion will not connect to the network

  Recently bought a HP Pavilion laptop and have tried to connect to my wifi at home. He returns constantly with incorrect network security key even though I'm 100% sure that it is correct, because I use the same password for other devices. I had to change my password for my wifi hub and enter this new password as the network security key which fortunately worked however, this means that every device in my house had to be resumed contact with the new password. Not only was it a lot of your time, but as soon as I turned off my laptop and turn it back on again a few hours later, it would not connect to the network again and continued to say the incorrect network security key (and this time changing my password for my wifi does not work). I was unable to use my laptop now because she's not not able to connect to my network and internet and it drives me crazy so help would be very appreciated to help me solve the problem

  Hey Amylou2603,

  Thank you! Exactly what I needed.

  Can you tell me if you have tried the steps that I posted in my previous answer and the results?

  You will also want to try to update the drivers for the card wireless on the laptop. You can find the drivers here: 15-n267sa HP Pavilion PC drivers. You will find them listed under network after you choose your operating system and click Next.

  There are a number of drivers here. Make sure you only download the drivers that match your exact wireless adapter. To see which card you have:

  1. Press the Windows Key + X.
  2. Select Device Manager.
  3. Expand network adapters.

  Once you have checked the map, download the appropriate drivers and run the installer.

  Let me know if these steps resolve the problem.

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

  Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

  Have you ever tried troubleshooting mentioned in this article?

  If you cannot connect to a cellular network or cellular data - Apple Support

• OfficeJet Pro 8600 N911a not connect to the network

  Hello. I hope someone can offer a solution to my lack of connection network printers.

  I followed each step that I can find to understand why the printer is not connecting to the network. Including uninstalling/reinstalling, turn off and turn on all systems and following the steps help diagnosis HP.

  According to "the wireless network test results:

  Wireless: 'PASS '.

  Connectivity: Connected "does not work".

  Network: SSID found 'Pass '.

  Printer compatible with Wireless Router Settings 'Pass '.

  No filtering "Fail" (MAC address filtering is disabled - I double checked)

  Channel 'does not work '.

  Security 'Pass '.

  Help would be very appreciated.

  Thank you for your time.

  Hello

  Try following the steps below and check if this can help:

  http://support.HP.com/us-en/document/c02480179

• Google Chrome could not connect to the network during installation...

  Currently I use maybe obsolete google chrome... But when I download the newest chrome and during installation... it could not connect to the network or internet connection so prevented me to install the new chrome... What's the problem? and how do it fix it? Thank you

  Try to download the full installer:

  Chrome for work: Chrome for work - Google

• OfficeJet Pro 8625 not connected to the network - no active web services

  Just bought this printer and cannot get the active web services! Keeps telling me printer not connected to the network. Printing and scanning very well. It is connected via USB.

  Hello

  You need to connect the printer to a network in order to enable Web Services, those who will not work with a USB connection, such as those that require an internet connection.

  You can follow the steps below to connect the printer to the network and configuration for the ePrint printer:

  http://support.HP.com/us-en/document/c03721293

  Shlomi

• Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

  I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation.  Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is.  I can files in front on other computers on the network (at home) and I can access the internet.  The active profile is public, although it should be private. I created this to access the homegroup during installation.

  I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.

  What can I do to get this working properly.

  a. no red X

  1. I tried to download a different driver, but it didn't work at all so cancelled.  To check if it was a pilot, I bought a usb wireless adapter.  I've disabled the ethernet connection and used the wireless connection.  The results are the same regardless of which connection I use.

  2. ran every convenience store without success

  3. services were what they were supposed to be

  4 safe mode is worse.  No network connection (cannot see other computers in all), although internet is accessible

  5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records.  Internet is available.

  I installed the software very little on this computer (just installed Win 8 last week.)

  The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.

  The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).

  I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.

  *************************************************************************************************************

  A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.

  To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install.  I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.

• After hibernation PC does not connect to the network until the 'Diagnose' button

  My PC Win 7 x 64 did for about 6 weeks, and it's a little annoying:

  After waking up from hibernation, there is no network connection. I'm behind a router and it gives IP addresses. The problem looks superficially like the IP is not renewed... but this isn't the issue of the root.  If I open the network and sharing Center, my network card and click on "diagnose" everything started working. Here is the text of the event log.

  If I configured the IP to be static (on the area no DHCP on the LAN), then the LAN adapter will not recover a hibernation. It is as if she is locked inside.

  Someone at - it ideas (or how can I run the Diagnostics of command line)?

  The Network Diagnostics Framework completed the stage of diagnosis of the functioning. The following repair option was proposed:

  The helper class name: AddressAcquisition

  Cause: your computer has a local IP address
  You might not be able to access the Internet or some network resources.

  Root Cause Guid: {245a9d66-ae9c-4518-a5b4-655752b0a5bd}

  Disturbances: reset the adapter "Local 2 network connection"
  This can sometimes solve intermittent problems.

  RepairGuid: {07d37f7b-fa5e-4443-bda7-ab107b29afb9}

  Seconds required for repair: 70

  Security context required for repair: 80

  Interface: Connection to the network space 2 ({748a5fd8-c314-482a-8ced-b0923a1ec97e})

  Hello

  Select the network option while the computer is in hibernation.

  Number of similar questions:

  http://en.community.Dell.com/support-forums/network-Internet-wireless/f/3324/p/19447805/20099948.aspx

  http://forums.Dlink.com/index.php?topic=47470.0

  http://justaddwater.dk/WP-content/uploads/2007/07/Lenovo-wireless-problems-after-standby.PDF

• WIN8 does not connect to the network of 5G

  I have a laptop Sony Vaio 13 Pro. Since late September, I was connected on a 5G network with her. I upgraded to Windows 10 5/6 weeks ago (not sure exactly when). 5G network worked a few days, and then one night it disconnected and never once I connected again.

  I tried each installer for the driver, all set to update (Windows updates, driver updated AND updates from Sony) and nothing.

  So yesterday I drove back on Windows 8, because according to a Microsoft agent, with the fact that I've been on the cat may be a compatibility issue with the driver and Windows 10. The laptop still not connect to the same 5G network that worked before without any problem. It would only connect to 2.4 G.

  Here is some info:

  Network adapter: Intel (r) Dual Band Wireless-N 7260, the driver was last updated. When you run the test Command, it shows radio for n and g networks.

  Since I downgraded to Windows8, I tried everything I could find on the community page:

  -a ran the adapter and network troubleshooting which gives me an error message: Windows could not automatically detects the network proxy settings.

  -Flushing the dns, no go

  -renew the investigation period, no go

  -disable the network, reboot and activate, still no go

  -all the proxies are disabled

  -tried to manually set my ip no, still does not

  -netsh int reset newspapers done, reboot still nothing

  -with still Win10 on I got the network card uninstalled with removal of the driver and reboot, no victory.

  The network is detectable on the list of my networks, at the same time, there are about 4-5 other devices on it, and works on everyone like a charm. The router Admin shows the operational network.

  I'm going nuts on my work stuff if pretty darn slow on 2.4 Ghz network.

  Hello

  If you right-click on the adapter in Device Manager and select Properties, you can see tabs for energy, advanced, etc...

  There, you can look around for anything that might be disabled or disabled...

  If it used to work in 8 win and it will not now, which makes me think it may be failed, but there is a possibility that something happened...

  Look to see if there is a setting for the 2.4 and 5...

  Maybe somehow the 2.4 is set as default...

  Now that I think of it, it is possible to have a framework like this in your BIOS...

  My HP laptop has a few buttons just above the Panel to turn off the wireless and other things... You could check of course make sure that something like that can not have been moved somehow and changed a setting...

  I don't have anything with dual band to check a little closer...

• Blu Ray will not connect to the network

  I have a blu - ray player that was able to connect to the internet era the first that I installed it. Now he sees my wireless network but cannot connect to it. All my other devices home plug correctly. Cable connection works fine, but we need a Wi - Fi connection. I tried to reset to factory setting network settings, but it did not help. I was able to connect to other networks that is not the password protected but not connected to the internet. Why did before, but not now, when nothing has changed?

  I did all this and the DVD drive still does not work.  My solution; Take the Sony DVD drive and get another brand that actually works the way it's supposed to.

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• Losing Internet connection, desktop freezes when connecting to the network adapter is being reset

  Hi, sometimes when I wake up my computer and try to access the internet I get a message that I am not connected to the internet, and the page cannot be displayed.  Then, when I click on the message to solve the problem, when it gets to reset the adapter connection area the computer freezes.  I have to turn the computer off and restart and it usually solves the problem the first time.  How can I solve this problem?  Thanks in advance.  (The Office is a HP 2009 m)

  Hi bkgreatdane,

  Thanks that's exactly the information that I need. Here is a link to the driver for your device Realtek. Download and install this and let me know how it goes.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=PV-78245-1&CC=US&DLC=en&LC=en&os=4063&Product=4147103&sw_lang=

  Thank you

• H233H"cable not connected" with the computer is turned off

  My H233H monitor displays an annoying blue "cable not connected" when my computer is off or in stand-by mode.  Monitor works find out otherwise and all the buttons on the front panel work.  But impossible to find a setting that will turn the monitor off when the computer stops sending a signal.

  If I unplug the cable from the monitor to the computer's HDMI, should not the monitor eventually fade or go to sleeo?  Or will she continue to display this message "cable not connected" blue indefinitely?

  Thank you

  Well, I realized that it is a problem of Acer monitor with HDMI input.

  There is no problem if I connect my H233H monitor with VGA or DVI cable.

  Just thought I'd come back and answer my own question if someone ever comes back here with a similar problem.

  Good luck...