Calc Dynamics Processor cannot allocate more than 350 the heap block of

Similar Questions

• Cannot allocate more memory to the virtual machine image

  Hello

  I am currently using VMWare Workstation 5.5.4.  I have a Win XP image that I run.  My host computer has 4 GB of ram (3 GB recognized by hospitality Windows OS).

  Currently, I am only able to allocate a maximum of 1 372 MB to my virtual machine Image.  I want to allocate more memory to my image, as I do more memory intensive tasks to my image.  If I try to increase the amount of memory (even to 1376 MB), I get the following error message:

  

  Any ideas on how I can increase the amount of memory I can attribute to my image?  I use only 1 image currently.

  Loking at your vmware.log file, I see that you have a section "DEFAULT USER" including a "prefvmx.allVMMemoryLimit = line 1429". I believe that it is in conflict with the ' SITE HOST/DEFAULTS ' section which specifies "prefvmx.allVMMemoryLimit = 2297".

  The ' HOST/SITE DEFAULTS' config.ini is the traditional config.ini file that people recommend that you edit.  On XP, it should be located in C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  I can't tell you exactly where the file config.ini 'DEFAULT USER' is located on Windows XP as I am running Vista.  I would start by looking under C:\Documents and Settings\\Application Data\VMware\VMware Workstation\config.ini to see if this file exists.  Or you can search your hard drive a config.ini file that contains the 'prefvmx.allVMMemoryLimit = 1429"line.

  I would recommend not not using the "DEFAULT USER" config.ini file at all.  In fact, on a default installation of Workstation 6.5 this config.ini file does exist.  I would recommend so transfer config.ini 'DEFAULT USER' settings to the "HOST/SITE DEFAULTS' config.ini and then delete the file config.ini 'DEFAULT USER '.

  After this is done, try again and let us know if things work better.

• Error 102700 - the calc Dynamics processor can not allocate more than the blocks of the heap [3]

  Hi all

  I'm stuck with this problem which, according to my research, seems to be related to the settings CALCBLOCKLOCK {H, L, D} and CALCCACHE {H, L, D}.

  I changed and I rebooted the server, and I can see them in the properties of the Essbase server.

  In any case I still can't allocate more than 3 blocks from the heap, it seems that nothing has changed. Can anyone advice for this?

  Thank you

  bidi

  Try increasing the essbase database data cache, and then restart the essbase database.

  See you soon

  John

• Satellite L505-10J - cannot play more than 30-60 min

  Hello

  I just bought the Toshiba L505-10 days last week and I'm really satisfied with my choice, but when I run a game like Counter Strike Source or Risen I have some strange problems. The first 30 to 60 Minutes are Ok, but then the sound starts cracking and my mouse stops (Razer Lachesis) shifts when I hold a key on the keyboard (for example, W to go forward). When I go to my office while playing this problem disappeared (I opened Notepad down W and moved the mouse. No problem at all). When I switch back is there once again. The only solution to this problem is to restart my computer. Then I can play the next 30-60 minutes before it starts all over.

  I have already reinstalled Windows 7, but the problem is still there.
  When I use my Touchpad instead of my mouse is the same thing. Cannot play more than 30-60 min...

  This is not acceptable, because I want to play games on my cell phone at any time.

  Hope someone can help me and sorry for my bad English, I'm from the Germany.

  Hello

  As I understand it, this problem occurs only playing games.
  There is no problem to use the laptop with another application.
  Is this good?

  Hmm how about graphic card driver update and BIOS update?
  If more recent versions are available then it would be desirable to update!

  Check it!

• Cannot print more than two pages

  Hello here

  I have a rather strange problem today: one of my users cannot print more than two pages...

  Regardless of the printer, the application or document, this specific user will receive the first two pages printed on the right, then a windows error (cannot print, the likely reason is a failure of the network, not enough memory, etc.)

  Current config is

  -User logged on the Witch of Windows 2008R2 Server Citrix XenApp 6.5 (published desktop).

  -Print server Windows 2008R2 with something like 150 shared printers

  I tried with other printers and file formats, on separate servers, it's always the same.

  Of course, everything works perfectly fine for other users...

  I'm not sure if any parameter can block printing up to two pages only, or anything else. Before you delete and recreate the user profile, as everyone has an idea?

  Grey'

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

  I "ve defined a custom control:"

  import bb.cascades 1.0
  
  Container {
  
      property alias text: label.text
  
      background: Color.create ("#262626")
      bottomMargin: 30
      layout: StackLayout {
          layoutDirection: LayoutDirection.TopToBottom
      }
      Label {
          id: label
          text: "..."
          textStyle {
              base: SystemDefaults.TextStyles.TitleText
          }
      }
      SegmentedControl {
          Option {
              id: option1
              text: "A"
              value: 5
              selected: false
          }
          Option {
              id: option2
              text: "B"
              value: 4
              selected: false
          }
          Option {
              id: option3
              text: "C"
              value: 3
              selected: false
          }
          Option {
              id: option4
              text: "D"
              value: 2
              selected: false
          }
          Option {
              id: option5
              text: "E"
              value: 1
              selected: false
          }
      }
  }
  

  And have used it as such:

  import bb.cascades 1.0
  
  Container {
      background: Color.create ("#262626")
  
      layout: StackLayout {
          layoutDirection: LayoutDirection.TopToBottom
          leftPadding: 20
          topPadding: 20
      }
  
      RatingControl {
          text: "Eli"
      }
      RatingControl {
          text: "Hazel"
      }
  }
  

  But when I load the app, I get this error:

  SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

  Ah, some so I missed the fact that only 4 of my 5 segments were displayed in the preview of the user interface, which should have been a hint.  So, this is just a warning.

  Something else that threw me off was that my UI was not poster when I actually loaded it in the Simulator, but I think it's because I need to have a Page at the top of main.qml, not a simple container.

• Cannot open more than 1 folder in Windows 7

  Hello! Running win 7 ultimate.

  I'm unable to open other windows of records once 1 is open. I cannot use that explore and must use the navigation pane to open the other files. Its very annoying that I can't open multiple folders! The funny thing is it works for a short period of time, just after I reboot, but the stops working there after. Someone has an idea, what happens? So frustrating!
  
  TIA!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  As described, cannot open more than one folder.

  Run the Fixit and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  Hope this information helps.

  Answer to us if you are having problems with opening files or any other issue of Windows, and we would be happy to help you.

  Good day!

• Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

  Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

  «a primary key has semantic meaning, it is to be immutable (never change of value), unique and not null.»

  a unique constraint is simply "at any time, these values are unique - they can change and they can be null.

  You use a unique when constraint

  (a) you do not already have a primary key for a table can have only one
  (b) you allow NULL values in attributes
  "(c) to allow you to update the values in the attributes.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:5541352100346689891

• Cannot open more than 1 pdf with adobe acrobat dc. How to set up so I have to open multiple PDFs?

  Cannot open more than 1 pdf with adobe acrobat dc. How to set up so I have to open multiple PDFs?

  Hi markj15462400,

  Open Acrobat DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in a new tab in the same window.

  Restart your system & now try opening the files.

  Let me know if it solves your problem.

  Kind regards
  Nicos

• I work in a large project on my main composition and have always return all night but cannot give more than one inside and out...?

  Hello.

  I work in a big project on my main composition in 2015 of EI, Yosemite 10.10.5 and always return all night but cannot give more than one inside and out...?

  If I give several definitions in my composition to queue rendering, After Effects rendered all points, but only the last again and again.

  I never need to make multiple files during the night, so I don't know if this is normal or there at - there a Posibility to return more control then a?

  Kind regards

  Florian.

  It's one of these bugs CC 2015. It would be possible to set using render settings different, it seems to occur with specific formats.

  Mylenium

• 3407: cannot allocate space to store the property information for global cache

  Salvation of the experts on the issue of a load in ttisql as follows, statement
  
  CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;
  
  This exception is thrown, and I can't find anything with google:
  
  3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid
  
  My my_ttdb DSN is configed as follows:
  [my_ttdb]
  Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
  Data store = / home/timesten/data/database / my_ttdb
  LogDir = / home/timesten/logs
  PermSize = 4000
  TempSize = 32
  DatabaseCharacterSet = AL32UTF8
  OracleNetServiceName = amq_915
  
  The result of cachegroups is:
  
  Group cache CACHEUSER. DOMAIN_GROUP:
  
  Group cache type: asynchronous, Writethrough global (dynamic)
  AutoRefresh: No.
  Breeding: LRU on
  
  Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
  Type of table: spread
  
  
  Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
  Type of table: spread
  
  The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.
  
  Waiting for your help, thank you.

  According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.

  As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.

  Tim

• Help resizing partition to allocate more space to the operating system

  I shared the size of my HD between OS & Windows when I partitioned.  I do not use Windows often but it's nice to have.  I would like to allocate more space to the operating system I use the low disk space.  I've seen several posts on the removal of Windows, the partition and then re-create it with the new size.  I also saw people talk about other programs to do.  What is the best way to do it without compromising the integrity of my HD?  OS X 10.10.5 - Windows 7 SP1 64 bit

  Thank you.

  The Apple-supported method is to remove Windows (Wizard BC only) and re-install Windows on a smaller Windows partition. Third-party tools come in a variety of commercial to the OpenSource and will work with varying degrees of success.

• Logitech C920 sequences is more than double the size of the original file

  Hi all

  I'm very new to adobe Premier Pro and I am just a little overwhelmed by the software. Here is my configuration of curect.

  Webcam: Logitech C920

  MIC: Blue Yeti

  I record video using OBS and it generates a file in the MP4 format. About a 10-minute film is at most 200 MB. Now, when I go to edit the clip in Premier Pro I understand that I must first begin a new sequence. This is my first problem: there is no predefined sequence that matches the C920 Locitech. So for now I'm just drag and drop the file into the time line. Is this correct?

  I can do the basic changes for now and that's fine, the problem comes when I go to export the images. I used H.264/Custom upstairs (MP4 format), I leave everything as it was. only 2 things I edit are the maximum and minimum flow for 10/16. I also check the box use overview at the bottom (I think that's what it was called) now when I hit Caryl export my PC Suite for about 10/15 minutes and give me a file that is about 700 MB in size. This is more than double the size of the original file. Why is this?

  If there is more information you need, I'll do my best to advise.

  Thank you

  If the C920 clip is the first clip you fall into an empty timeline, first expected to ask if you want to change sequence settings to match the clip (unless it is already). To be sure, simply right click on the clip in the project bin and select new sequence of the Clip and they will match for sure.

  The size of the exported video file is dictated by one thingand it is not frame size or frame rate - sampling rate is what determines the size of the file. If you want to halve the size of output file, you will need to reduce the flow rate by half.

  Rather than using Custom, maybe find a predefined existing H.264 which you gives the combination of quality and size of the file that you like? Make sure that the size of the image and the frame rate matches the source. How do you want to display or distribute material - on computer, on a device, online?

  I do not use the option use the previews - that means you take a temp make file and redisplay (transcoding) there again, adding a new generation of compression loss. By not checking this box, first visit the direct export from the source element format, by cutting out the middle man. I do not have a clip that is so effects loaded it will not play in the timeline panel to check the results, I don't bother making anything green. Everything is done at time of export anyway.

  Red, yellow and green make bars and what they mean. First work Pro area

  Thank you

  Jeff Pulera

  Safe Harbor computers

• ___When I have a file I multi page and "Save as", he saves more than just the page that I was clear

  When I have a multi page have e wire (50 pages) and "Save as", he saves more than just the single page, that I was clear (IE. Rank 1-1)... it saves all 50 all over again? How to save just 1 of 50?

  Just answered my own question - if I use 'save a copy' it works... must be a glitch

• cannot increase more than 2048 M SGA_TARGET although SGA_MAX_SIZE = 8G

  AIX 6.1, Oracle 11.1.0.7
  
  Anyone know why I can't increase my more than 2048 M SGA_TARGET?
  
  I have my set SGA_MAX_SIZE to 8G, but still cannot increase SGA_TARGET.
  
  In the meantime, I just got an ORA-04031: unable to allocate 32 bytes of shared memory.
  
  REFERENCE:
  =========
  SQL > sho sga parameter
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  lock_sga boolean FALSE
  PRE_PAGE_SGA boolean FALSE
  Whole large SGA_MAX_SIZE 8G
  Whole large SGA_TARGET 2G
  
  1 SELECTED component, current_size, min_size, max_size
  2 from v$ memory_dynamic_components
  3 * WHERE current_size! = 0
  
  
  
  SQL > /.
  
  COMPONENT CURRENT_SIZE MIN_SIZE MAX_SIZE
  ---------------------------------------------------------------- ------------ ---------- ----------
  Shared pool 1744830464 738197504 1744830464
  large pool 67108864 67108864 67108864
  pool of Java 134217728 67108864 134217728
  rivers of 67108864 67108864 134217728 pool
  Target LMS 2147483648-2147483648-2147483648
  Cache buffer by DEFAULT 67108864 67108864 1073741824
  Target of 2147483648-2147483648-2147483648 PGA
  
  7 selected lines.
  
  Any ideas?

  You may need to change the/etc/security/limits file and looking for the flexible DATA segment, it must have the value-1 (unlimited).

  ~ Madrid
  http://hrivera99.blogspot.com