Calculator HP48SX setting Date and time do not work

Similar Questions

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• 'RT Set date and time' does not define the UTC seconds

  Hallo,

  I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the vi "the Date and time value. But the second I get home are ADDED to the current time and not defined as the new value.

  Even the vi illustrates this behavior: I've set up a vi time where in a loop (100ms delay) and reread. When I put in local time stop the clock (as expected), but when I put the UTC time the Dungeon seconds on the run...

  Can someone help me with this problem?

  Thank you

  Florian

  Hi Florian.

  After posting your version of LabVIEW, I found an answer to your question:

  The behavior you're seeing is a known bug that has been fixed in LabVIEW 8.5.1. Workaround is to use set local time instead.

  Let me know if you have any other questions.

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• ATV 4 cannot set date and time

  During Setup wi fi passes accepted. Activation of start and the message is - impossible to contact Apple support set Date and time.

  It is not correctly connected to your network

  Make sure that DNS is set to automatic (network - general - settings)

  Try Ethernet

  Make sure that the router has port 123 open (refer to the manual if in doubt)

• date and time do not automatically change it remains the same as the last time that I turned off the computer, it has recently started to happen

  The date and time do not automatically change when I turn on the computer, it has recently been like that.  I have change the settings manually and everything is ok until I turn on the computer the next day.

  The date and time do not automatically change when I turn on the computer, it has recently been like that.  I have change the settings manually and everything is ok until I turn on the computer the next day.

  Change the battery on the motherboard.
  http://www.computerhope.com/issues/ch000239.htm

• Setting date and time for several photos

  Thank you for providing the space for new users and thank you in advance for your help.

  Currently, I'm moving across lightroom and apple aperture/iphoto 5.

  The part of OCD I like to have my library organized, and I noticed that when I transferred my library everywhere he is in a bit of a mess, so I'm currently putting together the library and it cleaning (around 18000 photos)

  Anyway, I almost settled on a folder structure (YYYY/MM - I for the number of photos I have try on the nut until days could be for many - happy to receive Advisor on it also)

  For the most part, the photos have the date and time of the beginning of the digital age (for me from 2006)

  Photos prior to 2006 are in the negative, and I am currently underway with these scanned and imported into the library, I have a lot each month.  Set the date and time from the date of creation, this is where I am running into trouble.

  I looked around the web and various forums without success.

  First of all, I organize the pictures in the correct order.  Then I select the first photo and then select it the remaining photos.  I then select the date/time setting in the menu and select the first option, ajuster to adjust to the new date and time, say on 01/01/1990 to 1200 hours.

  The result I get is the first photo (the photo so good term) 01/01/1990 @ 1200 as the date and time, others have 01/01/1990 Date (if I'm lucky), and the time of jumping around.  Sometimes it wont even change the date time for the remaining photos.

  What I want to achieve is the time even for all the photos when I select a lot, or increment in time by a lump (is to say 1 minute (1200/1201/1202) or 1 second (1200:00 / 1200:01 / 1200:02)) and I seem not to be able to work it to do this automatically, currently, I have to do this by adjusting each photo (some 200 at a time) which is really manual labor)) intensive

  Thanks in advance and hoping an easy solution

  Concerning

  
  Dean

  I have had success using EXIF change of Basepath.com, but is not

  free. There are other publishers had EXIF free that may be useful to

  you. Some are better than others, and all have a learning curve. I suggest

  make a copy of some files you want to change and make a test of some of

  the available candidates. Search for "EXIF editors" and you can see what is

  available.

• Date and time do not synchronize with internet time server

  I continue to adjust the date and time of my laptop. but after an hour, the time is wrong once again. It was late, and sometimes the time and date back to yesterday's date.

  Hello

  ·          What version of the operating system is running on your computer?

  ·          When the issue started?

  ·          It's a laptop or a desktop computer?

  You can read the following article:

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/windows_date_it_overview.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Set-the-clock

  Windows 7: http://windows.microsoft.com/en-US/windows7/Set-the-clock

• EU set date and time why?

  I don't know if I have a virus or I messed up things myself. I had to restore my time until the exact date because it has been changed for 2002. I'm not good with computers, so that's what I did this morning: I turned on my computer and got a text with a logo for American Megatrends at the top. I had no idea what it was what worried me, it's from a virus and the text did not correspond to my screen for me to be able to read I turned and on my computer. Then I got the usual error message asked if I want to start Windows normally. I click on start normally. Then I could not connect to hotmail and my Webroot Antivirus was misinformation that changed checked it a-2998 days ago and next check would be 2008. So I figured out I had to change my date and time to the right pair. Before that I tried the wrong way, I guess that my internet time synchronization attempt. I got an error message for each of the listed to synchronize with. So now its exact date/time and I've updated my Webroot info has been fixed too. I have had no virus warning when scan with an anti malware program before correcting the time or with Webroot after correction.

  Hello

  This problem was not likely to be malicious.

  The American Megatrends has your system called BIOS or CMOS settings/settings? Your BTI
  battery need replace - real-time clock located on the motherboard of the computer.

  If necessary to replace the CMOS battery on a laptop you probably need a real computer store
  (no leeks and glances at a BestBuy or BigBox stores) or the manufacturer of your system support.

  Battery CMOS is also known as RTC battery
  http://www.laptopparts101.com/CMOS-RTC-battery/

  How to replace the CMOS battery
  http://www.computerhope.com/issues/ch000239.htm

  CMOS BATTERY
  http://murfsgarage.cybertechhelp.com/CMOS.htm

  CMOS Batteries for many brands of laptop.
  http://www.Microbattery.com/laptop-notebook-CMOS-batteries.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Date and time are not displayed correctly

  The motherboard was recently replaced on my Pavilion dv6-2155dx.  Since then, my laptop does not correctly time.  It seems that once I turned off my laptop, the clock stops as well.  When I login again, the date and time displayed is the same date and time when I finally stopped my laptop.  I am running Windows 7 64 bit.

  Take the real time clock of your old Board stack and install it on the replacement or better yet, buy a new one. After that you will also be asked to load the BIOS defaults, click Yes.

  Post again if you need instructions on where to find the RTC battery.

• Date and time stamp not updated

  Following my previous posts, the date and time stamp of the files updated don't are not updated in the RoboSource Control, i.e. the column changed in the Explorer RoboSource Control. However, it seems that changes are stored on the server when the topics are archived, as I can right-click a file to source code control that I've changed, choose the command view and see the changes in the HTML code.

  Basically, this means that source code control is not recognizing that the files have changed and that's why when someone is trying to get the last version he thinks he's one because the date and time are the same as the previous version.

  Everyone knows this behavior before or know why the modified column suddenly stopped updating?

  Thank you

  Jonathan

  After a few Google searches of the digging and random, the following article seems to have solved my problem.

  It seems that if you run RoboSource Control on 64-bit computers, there are problems with checking in files.

  http://helpx.adobe.com/robohelp/kb/cant-check-files-robosource-control.html.

• Date and time do not appear on the video captured in first Elements 9.

  Is it possible to get the timestamp to show up on the video captured from an older model mini Sony TRV18 camcorder DV?

  I can see the stamp date and time during playback of the video from the camcorder, but no time stamp appears in the clip mode capture first, or on the captured AVI file.

  I have the first Elements 9. If it is not possible in first 9, any suggestions for capture software where can I get the date stamp and time would be appreciated.

  TKS.

  This isn't a feature or a Premiere Elements.

  However, you will be able to your video using a program called DV Date stamps.

  http://Paul.glagla.free.fr/dvdate_en.htm

• BlackBerry Smartphones device date and time will not

  I have a BB Torch 9860. Unit date and time is wrong, but I can't change it because the icon in the panel display and controls, update is marked with a lock symbol auto. Also the Auto update time zone: display the prompt with a lock symbol. Network time is correct. Can anyone help with this please. Thank you

  Sounds like policy. If this device is on a BES and controlled at least partially from your employer, you need to talk to your employer or your employer, IT people. If it is under your full control and of your device, then there is no problem in removing a COMPUTER policy.

  See http://www.blackberry.com/btsc/KB30076

  If you have a COMPUTER policy, see http://www.blackberry.com/btsc/KB14202

• shared variables stops when I use RT Set date and time.vi

  Hi all

  I have a problem that I can't solve. I run a project of RT on a PXI-8106 module using LV8.5. I used shared Variables to transfer data to and from my host computer for about 6 months with no problems. Recently I neeeded to the synchronization time RT with my host PC of time (to collect time-stamped data of the target RT) and I decided to use the "RT set time and Date.vi ' both before the beginning of each synchronization test.

  As soon as I started using this vi, I noticed that my shared variables would either stop updating, or slow down considerably (this includes loss of data during the transfer of data between the PXI to host PC with shared variable). I do not receive any errors or warnings from any of my shared variables, and no errors are generated when using the RT set time and Date vi, so im at a loss for where to start. Ive disabled this feature for now and my system works well again, but I want to get this to work because the timestamps generated in the data by the RT system are out and I need a method to synchronize the time with the host pc.
  Any ideas would be appreciated,

  Thank you

  David

  Thanks for the info. I'll avoid upgrading to 8.5.1 at the moment so I'll just remove the VI. Instead, I create a 'elapsed time' timestamp which should do the job.

  See you soon,.

  David

• Setting Date and time HP 7610

  I cannot set the Date & time by using the printer HP printer Assistant homepage > settings > preferences > Date & time.  When I put the date in the calendar and update time, it returns an error "invalid entry" message X.   What else can I try?

  No, it's the new title IE 11 has... so you have two options.  Use a different browser, or you can open the integrated Web server and click on the top right you will see a gear on it and select compatibility settings and add the SAP address (should be there by default), you will then be able to save your settings in the SAP... Let me know if it works for you.