calendar hangs up with 'moving server msg.

Similar Questions

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• Mail creation of massive log files and stop the synchronization with the server

  Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

  (1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

  (2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

  These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

  Full of ideas gratefully received!

  Thank you!

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• BlackBerry Smartphones Google Apps on Blackberry BIS - domain address custom synchronize calendar or Contacts with BIS

  Hello

  I need to sync my Google Apps with my Blackberry 9900 OS 7

  My company moved all our emails, place to stay in Google Apps - Gmail/Contact/calendar

  and we use our own domain name for our emails (for example. [email protected]) with Google Apps - Gmail

  When I tried to configure my email to company (for example. [email protected]) on the BIS to setup email, they are not able to detect my email of company is a Google Apps account and I need to manually enter my mail server, which is 'imap.gmail.com '.

  Only with manual configuration, I am able to properly configure my business email Google Apps with BIS account.

  BUT I am still unable to sync my calendar GoogleApps and contact, because there is no OPTION for me to 'Tick '.

  But with my own personal e-mail account (for example: [email protected]), I am able to sync calendar and contacts on the BIS to facility Web site.

  My question is, why is there a difference? Since the two e-mail addess domain (@abc.com and @gmail.com) are with GoogleApps - Gmail service.

  Hope someone in Blackberry can help to answer this question and so it will be differently will strengthen the confidence or feature added to maintain the trust of the Blackberry users.

  Here is a link to Google:

  support.google.com/a/Users/bin/answer.py?hl=en&Answer=2365095

  This article applies only for Google Apps customers

  With the help of Native BlackBerry apps

  BlackBerry® Internet Customer Service: You can configure your device using BlackBerry® Internet Service (BIS), which is part of the standard service plan for BlackBerry. Works with mail, calendar and Contacts on BlackBerry BIS and syncs with Google Apps email, calendar, and contacts. BlackBerry Internet Service is provided by RIM and mobile operators. For information and support, please contact RIM.

  Published has been resolved with RIM and RIM can only help.

  And now I have the opportunity to choose what to synchronize on BIS - calendar or Contacts.

  LWOP necessary to update their MX records to allow custom using GoogleApps domain to be connected through the same way "Gmail.com" domain is connected via BIS.

  Hope this clear to GoogleApps calendar and contacts Sync with BIS questions.

  * Do not forget to also enable/active calendar and contacts on your GoogleApps and only calendar and contacts of parimary parimary is able to synchronize with the server, once the NOC has helped your custom on their MX records domain.

  * Shared calendar or contacts won't sync!

• synchronization settings iCloud causes interference with synchronization server

  Specification of the server:

  Mac Mini server (MacMini5, 3)

  10.10.5 OSX

  Server 5.0.15

  I had a very big problem with the synchronization settings iCloud interfering with my server synchronization. I'm in an office of 29 BYO Apple laptops in my Mac server. We have worked with this setup for years. We moved recently to Exchange for our mail server so I added all the Exchange profile to the Profile Manager and added the name of the account with '[Exchange]' so that they don't get confused that we were still in the process of migrating emails. A few weeks later, I decided to change that and has deleted this text as we did with the migration and the clarification was not necessary. I made sure to go to the computer of everyone and they don't de-s' register and re-register (I know that's not necessary but to keep the long story short, I leave the superfluous details). Most of the time, everything works fine. However, sometimes a system will just stop with the synchronization server profiles. When I go in the system of this person, I'll see what the email account with Annex [Exchange] is back. Because the connection account information are exactly the same, it prevents the server anything inside this synchronization profile. My only assumption is that the re-emergence of this story comes from the iCloud synchronization. I'm sure that because if I UN - enroll in this system, all the accounts given by the server disappear, leaving just one account. So, I delete and re-register this system and everything goes back to work normally.

  I hope that all made sense. It basically happens to everyone eventually, and sometimes repeat users. I can't ask my users to stop using iCloud because they use it for a lot of personal things, but this is starting to become quite annoying. Everyone has this or a similar issue or know a fix?

  You have to disable iCloud keychain to stop synchronizing email accounts.

• Synchronization with a server of VI

  I currently have a server / multi-client application I implement with server of VI in LabVIEW 8.6.1.  Call to the server to execute different screws to store/retrieve/process data and the screw store data in files as well as globals function, i.e. an uninitialized moving records within a while loop.  I have a few questions about this implementation:

  1 are the calls made via VI server synchronized by VI Server; in other words, not realizing the reentrant Server VI VI never will launch multiple instances of the VI on the server system (I won't for obvious reasons)?

  2. I currently use some of the screws in my app server as static screw and also allow others to call in some of them from remote hosts via the server of VI, and I am concerned about the integrity of the data within my service globals (I took the precaution of open handles for all THE screws I share with VI Server so that they never go out of scope to be used as static or not).  Is this bad?  If I used only the VI server calls in my server application, it would be better (instead of using the 'shared' statically screw)?

  3. when a remote client is called on the server via a VI server, what happens when the VI is busy?  Does my remote call via an error call-by-reference node, or it fortunately waits his turn until the VI can be accessed (assuming that the #1 question is that one instance can never be executed).  I do have several systems to check the conditions of race.

  4. I use this implementation of VI server between Mac and Windows, do I need to be careful (in addition to the obvious path problems)?

  Thank you!

  -Danny

  TarantulaDiaz wrote:

  not realizing the reentrant Server VI VI never will launch multiple instances of the VI on server system?

  Only if it's a LIVING.

  In addition, even if it is reentrant, the VI server will not open multiple copies unless you set the flag in the options of the Ottawa Valley Railway (you can see the exact value using the primitive).

  If I used only the VI server calls in my server application, this would be better?

  I prefer the static approach for three reasons:

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Participate in a network Windows with Samba server

  If anyone can help with this? I have installed Samba server - do I need to install anything else?

  This is according to the functions you need on the server and I n know what you need because you didn t this post.

  In your case I a bit with Google search. In the internet, you can find a lot of description, how to create a network with a server Samba and Windows and Linux clients.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• sync calendars and contacts with outlook iphone

  sync calendars and contacts with outlook iphone

  andrchel wrote:

  sync calendars and contacts with outlook iphone

  Then turn on calendar and contacts in the e-mail settings, then it syncs.

• I have rcd an aol email asking me to connect to correct problems with the server and took me to an unknown website waqui.press.ma once I've trashed this e-mail my server started working normal is this mail a virus?

  I received an email from aol asking me to log in due to problems with my server, it took me to a website "waqu.press.ma" is an attempt to plant a virus?  Once that I've trashed this e-mail my server was working normal.

  If you are on iOS as implied by your footer, and you provided no identification or such information to the server, you're probably fine.   (Unless your device is jailbroken.  This process turns off a large part of the iOS security.)   If you have provided something IDs, change these now and then determine what other information is accessible using the credentials - the content of mail messages, no password that have been sent to you, etc.

• Select the label with VI Server/scripts

  I am trying to flush out my script code - and one of the functions I did auto pulls the focus of controls recently interrupted/indicators LABEL on the FP - I want to be able to select the text of the label - and I thought it was possible with VI Server Label.Selection.  I use another VI to take Ref VI of VI I am tracking to get the last control on the PC using the script to browse function - that part works fine.

  Label.Selection does not work, even when I set immediately KeyFocus = TRUE before the Label.Selection property.  I even inserted a frame VIFrontPanel.IsForemost is TRUE for the target VI before asking the KeyFocus for control...

  I checked that the target VI is slowed DOWN by reading the State of the VI.

  OBJECTIVE: I try to imitate the selection of the entire label that happens when you drop a new control.

  Any idea would be appreciated.  I've posted on the Board of Scripting - but do not get any response.

  On my Windows machine I would probably use a little trick of mouse function using user32.dll.

  Here, I simply select the first control, place the cursor in the center of the label and the false double click.  Then I move the cursor to the lower right.

  

• Unabl eto manage my mail server using Alt - N Mdeamon Mailing software with windows server 2012 R2...

  Original title:

  Mail server

  Guys, I'm having trouble managing my mail server using Alt - N Mdeamon Mailing software with windows server 2012 R2...

  Can anyone suggest Me an alternative to that.

  Waiting for the answer

  Problems to go to the post office software company.

  Google for other e-mail programs.

• FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  Try the FoxPro Forum

  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Don