Call a dll for Labview: function not found in the library

Similar Questions

• "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

  In addition, this can happen if your SP service pack is damaged/corrupted.

  You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
  http://support.Microsoft.com/kb/888162

  Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
  http://support.Microsoft.com/kb/972264

  NASS - http://www.nasstec.co.uk

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• The procedure entry point UXCore.dll! 0CDUIDialog@@QAE@XZ is not found in the library of dynamic links UXCore.dll

  The procedure entry point UXCore.dll! 0CDUIDialog@@QAE@XZ is not found in the library of dynamic links UXCore.dll...  What can I do to resolve this problem in Windows Live Mail?

  See if trhis is useful:

  https://windowslivehelp.com/thread.aspx?PostID=1549d01b-5419-41f8-ACCB-31b7e0e36383#1549d01b-5419-41f8-ACCB-31b7e0e36383

  Tom Ferguson

• Startup error: wlstartup.exe the proecedure entry point is not found in the library of dynamic links UXCore.dll

  Original title:wlstartup.exe

  What follows is popping up on our computer when to start-"the proecedure entry point? GetHeight@CRMImage@@QBEHXZ not found in the library of dynamic links UXCore.dll"- what's going on and how clean us this up - thank you

  Hi chattums,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Method 1: Issue of wlstartup.exe could be caused by an installation Windows Live damaged or broken; You can see the steps by Joe Cap and Halima S, in the link below that relates to a similar question.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/55aa850a-e2d3-4816-820F-5caf0a766b44

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "the entry Point of procedure aspSearchInterfuce not found in the library of links dynamic wlanapi.dll" after SP 3 and IE 8 displays.

  Original title: Windows XP Home error message

  I reformatted the hard drive and restorded factory settings. I've upgraded to Service Pack 3 and IE 8. I now receive the errors listed below and the computer does not turn off. I have to hold in the power button to make it stop.

  Errors:

  The procedure entry Point aspSearchInterfuce could not

  Be found in the library of links dynamic wlanapi.dll

  The apsInitialze procedure entry Point could not be

  located in the library of links dynamic wlanapi.dll

  can someone please tell me what are these errors and how to fix?

  Hi Daytona931,

  Hope you were able to resolve the issue and thank you for sharing the information.

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• ArcCon_GetConnectVersion is not found in the library of dynamic links ArcCon.dll

  Actual title: ArcCon .ac-Entry Point not found error

  Hello, I get the error "The ArcCon_GetConnectVersion be found in the library of dynamic links ArcCon.dll" every time that I reboot my laptop.  I tried to uninstall my ESPON scanner software and reinstall. It eliminates the error when the computer is turned on but whenever I restart the system, I get the same message as previously wrote... Please help me to remove this every mistake of banner of 5 sec.

  Thank you

  Frank M

  Hello

  -Did you do changes on the computer before this problem?
   
  I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• resources for customizing Windows not found on the server

  Hola

  Tengo vsphere don't con vcenter, y estoy venga perform the tests y no can not desplegar una nueva Máquina virtual basandome in una plantilla, en el Assistant me da dice:

  resources cutomization Windows not found on the server

  Y todo aprarece appears.

  He descargado el sysprep y he probado en leave in several rutas distintas, probando a ver en cual works,... of momento in none pero me ha funcionado:

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\1.1

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep

  C:\Archivos programa\VMware\Infrastructure\VirtualCenter Server\sysprep

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\1.1

  ¡¡Aucune hay manera wearing

  Saludos

  Hola

  Cuando you refieres a:

  The creo Ahí las carpetitas that enriched para los sistemas operating different.

  No you aparecian are con make? Como you comenta jose_maria no don't be crear carpetas sino use deben las existing. Perhaps the problem of the creation of cada vidéoconférence venga y permissions that the asignan... can VCenter no can access has provided carpetas.

  Puedes revisar permissions? o heredar desde sysprep?

  Saludos

  If upon esta u otras answer useful, por favor considered el puntos seleccionando respuesta correcta o util como asignar

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• Error message "5377 xlive.dll" not found in the library link when trying to play F1 2011

  Original title: f1 2011 5377 xlive.dll error

  Hello
  When I opened f1 2011 the game it gives message not found 5377 xlive.dll in the liberary link.
  and I try a lot of things
  1. install games for windows marketplace and to update
  2 - Download the xlive.dll file and located in System 32 and the game folder
  3. use the command prompt start menu

  so I tried my best and I need your advice...
  Thank you

  Hello

  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  Note: follow step 4 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/310353

  Hope this information helps.

• the entry point producer d3dperf_setmarker is not found in the library d3d9.dll dynamics.

  All my games do not work

  When I double click on fifa 09, he said that the producer entry point not found d3dperf_setmarker in the library d3d9.dll dynamics.

  can someone tell me how to solve this problem

  Hello

  Please check if you are able to play this game in a spare user account

  -Cleanboot Windows to isolate 3rd party interference

  -Check if there is an update/patch for the game

  -System Restore to a date and time when the game worked successfully

  -Open the control panel and try to repair the application

  Uninstall/reinstall the game

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Some games gives the error: 'the point procedure entry CtfImmGetTMAEFlags's not found in the library of dynamic links IMM32.dll

  'The procedure entry point not found CtfImmGetTMAEFlags in IMM32.dll dynamic link library.'

  It happens when I'm going to play some games (example: League of legends when a game starts and it comes out of the login screen) and close programs, I can not update windows or recover from a certain date they will fail each time.

  Hello

  Follow the steps in the below link and then try to install the games and check if the problem still persists.

  Method 1: clean boot Mode

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/929135

  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2: You can try to contact the manufacturer of the game for better assistance, because it is specific to the game.

  Hope this information helps.

• Start my computer, I get a message that says. The apsintialize is not found in the library of links dynamic wlanapi.dll.

  Hello, can someone please explain "what it is and what it can do in the performance of my computer", by the way that I am working with Windows XP Home Edition. Thank you Sherry

  Hi Sherry,

  Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll. This file is installed in the %WINDIR%\System32 folder. Some installations of device driver for some third-party wireless network adapters also install a Wlanapi.dll file in the folder % WINDIR%\System32. If a third-party network adapter file is installed in this folder before installing Windows XP SP3, the Wlanapi.dll file that is associated with the network adapter is replaced by the Windows XP SP3 installation file.

  Proceed as from the link below and check if it works.

  Error message every time that you restart the computer after you install Windows XP Service Pack 3

  Good day!

  Answer please if you face concerns.

• entry point not found in the library of syncnotifier.exe dynamic links, help please

  Unable to connect to ITunes, reads the message: ApplesyncNotifier.exe - point of entry not found?

  Hello

  AppleSyncNotifier.exe is part of ITunes, I would suggest you download and reinstall iTunes from here http://www.apple.com/itunes/download/

  It might help to solve your problem

  See also:

  http://support.Apple.com/kb/ts1368

  You can also get in touch with support for ITunes.

  Reference:

  Welcome to iTunes Support

  http://www.Apple.com/support/iTunes/