Call a malfunction

I noticed while my Moto X (Gen 1) is on the vibration mode and at the same time if I'm listening to music using headphones I encounter a bug or a problem in the phone. The bug is like right now (phone in vibrate mode + music) if I get a phone call will be begin to vibrate but music player will pause not which is quite not wait. Especially if I work on my laptop and listening to music to keep my phone away from me usually I miss much appeal because I don't really understand if I have received and what you call as I have not been not been interrupted while I get an incoming call

I hope that this has a solution and it would be great if anyone can share some thoughts on this.

Thanks in advance.

Tags: Motorola Phones

Similar Questions

  • hardware malfunction call your hardware to support provider

    Must have Windows Server 2008 R2 Standard license installed on IBM Blade Center Server, while being used, the blue screen appeared with this message...

    • Hardware malfunction
    • Call your provider of support material
    • The system stopped *.

    As repeatedly blue appears and the system will stop the State.

    Please note this point.

    1. I have Symantec Endpoint Antivirus installed with the automatic update enabled server

    2. I haven't added or installed new hardware or software

    3. the new amendments in the server

    Please let me know the exact solution.

    Kind regards.

    Pritesh Bhatt

    E-mail: * e-mail address is removed from the privacy *.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • .... MALFUNCTION OF THE EQUIPMENT... CALL YOUR PROVIDER OF SUPPORT MATERIAL... THE SYSTEM STOPPED... NMI: CHANNEL CHECK / IOCHK...

    After the execution of 4/5 in my system hang and sometimes, it's the blue screen and message showed...

    HARDWARE MALFUNCTION
    CALL YOUR PROVIDER OF SUPPORT MATERIAL
    THE SYSTEM STOPPED *.
    NMI: CHANNEL CHECK / IOCHK
    Please, I beg you. someone tell me how to solve this problem...

    I would recommend that you contact the manufacturer of your computer and give them the error code, as shown.  The error means there is a serious hardware problem with your computer, it is not what Microsoft or Windows caused or can solve.

  • "A serious malfunction has been detected...". »

    So my iMac just caught my attention with LOUD beep the next "dysfunction."  Is this true?

    Dear customer,

    A serious malfunction was detected with OS X 10.11.6 and your Chrome 51.0.2704.103. Please call the number below for Apple Macintosh technician to help you solve the problem:

    (818) 629-1561

    For your safety, close the Chrome browser has been disabled without the support of the technician to avoid corruption in the registry of your OS X 10.11.6 Apple Macintosh operating system

    Please contact support Helpline (818) 629-1561

    DO NOT SHUT DOWN or RESTART the COMPUTER, THIS CAN LEAD to DATA LOSS AND POSSIBLE FAILURE OF THE OPERATING SYSTEM AND NO BOOTABLE POTENTIAL RESULTING in COMPLETE DATA LOSS SITUATION, CONTACT MICROSOFT CERTIFIED TECHNICIANS TO SOLVE THE QUESTION APPELLANT - (818) 629-1561Dear client,.

    A serious malfunction was detected with OS X 10.11.6 and your...

    This kind of message is a scam. Do not answer, or call this number.

    Phony 'technical support' / 'ransomware' popups and web pages

  • Tecra 9000 - hardware malfunction with battery

    Hello

    If I only work with my battery I get the message:
    Hardware malfunction
    Call your provider of support material
    NMI: Channel Check/IOCHK
    Support has ceased

    Last week, I change the battery but the problem is still on.

    Hello

    According to this Microsoft article http://support.microsoft.com/kb/222973/en-us, there is a hardware problem. In my opinion, you will not be able to record only. Contact the service partner in your country and let check the device. If this continues with the new battery too, I presume that there is some problem with electronic power to the motherboard.

    This message occurs only if the mobile PC is running on battery power, or in other cases too?

  • Tecra A8 BSOD - hardware malfunction

    Hello world.

    I have Tecra A8 and there is problem happened to me all the time.

    Blue screen with this message:

    Malfunction of the equipment; the system is shut down. Call your provider of support material

    I changed the hard drive & RAM, but it doesn t work

    One had this before

    It does not seem good buddy.

    It looks like a serious hardware problem. Maybe it s related to the motherboard.

    I think you should do what is written in the message: call your hardware support of the seller.

    So I recommend you to contact the local Toshiba authorized service provider.

    Good luck

  • Cannot dynamically include called subVIs in construction

    Hi, I have a VI that calls some Subvi - i.e. by reference dynamcally.

    I am now building an application and loking for this manual for help (I'm using LabView 2012):

    This link http://digital.ni.com/public.nsf/allkb/410F2EC66F60F9B0862569EE006F4FA0 has similar instructions:

    However, my problem is that I can't click on the arrows in the window. This window for me looks like this:

    and no arrows are clickable and no help by adding the dynamic subVIs!  For example, when the application is built, it is malfunctioning.

    Would appreciate any help you can provide on how to address the issue.

    Thanks in advance!

    Hi SensLab,

    When you use a project LV then you would be able to include all the necessary screws when building!

    BTW. Dynamically called screw should be included in the project too...

  • Peut; t hear his Skype call

    I have a problem when I'm wanting to make a Skype call. The other person can't hear me. I tried all the malfunctions, but yet the person can hear me but I can hear them.

    do a sound test of Skype to determine if your microphone is working.

    http://www.Skype.com/go/help

    If your friend cannot hear you maybe its their end does not.

  • Hardware malfunction

    Hardware malfunction

    Call your provider of hardware support

    NMI: Parity parity CheckMemory error

    The system stopped *.

    Hi, can someone tell me how to solve this problem? Initially, we thought that it was the computer that causes this, but after the day the computer test, this seems to be the problem with the computer.

    I think it's the PCI and PXI card on the computer that is the cause. Does anyone know what I can do about it?

    Thanks in advance.

    Hi Krispiekream,

    Look at this post and tell me if this helps solve your problem.  I noticed you have Vision with LV 2009, so it would be good to check that the solution of first before taking what anyone else.  In addition, I do not know the equipment you use, but if you have a 8221 OR with a NI 8171, see this knowledge base.  If they do not resolve that your problem made me know, thank you.

  • My latitude D610 crashes on me. From the start, I get this message on a blue screen: a malfunction of equipment

    Message hole bed hardware malfunction call your hardware support vendor.

    NMI: Parity check/Memory Parity Error

    The system is shut down

    Now it's on a blue screen and then I have to hold the power button until the computer turns off. Nothing was wrong with her until my Bilkin wirless card broke and I had to reinstall the Witch of a down preveusly internal wireless card so I shot, but it worked very well until I had to stop so we could go out and then when I turned on the computer laptop back it keeps in past. now is this a problem with the wireless card or my memmory?

    With it this way I can get on only in plain old safe mode not safe mode with networking. Maybe that I need to take the card out and try it and if it works I think I'm stuck hang the old wiring cat 5 and goining this way right or wrong? What is a body to do? I have not I hope so gruff like to be wireless, I mean after all that's why I pay big bucks so I can go wireless.

    Thanks in addvance here you guys for the excellent work to help us poor people in this way.

    jimmy1950hailey

    Jimmy

    If I understand your question, yes get out the wireless card and try. If that too fails, contact Dell or your local computer repairer.

  • blue screen on the PXI-8106 module: hardware malfunction

    Hi all

    I have a module, PXI-8106 (2 GB of RAM) - with a PXI-6254 and I was running trials with the attached screw (continuous acquisition of 16 I and 32 DI triggered by RTSI 4-5 kHz).

    When I started this morning, I got a blue screen of death saying this:

    Hardware malfunction

    Call your provider of support material

    NMI: Parity parity CheckMemory error

    The system stopped *.

    Now, I restarted the PXI revived the VI and it works again.

    Is there something I can do to ensure that this error will not be shown again?

    Thanks in advance for any help

    Meh... I know I'll be back on a fairly old post, but I found the solution.

    For some reason any installation Vision Acquisition software 8.5.1 created the problem by defining itself as the default driver for the network card. Then, go to 'manage' by right clicking on the 'Bureau', go to the hardware section, network card and select the intel driver solved the problem.

  • Hardware malfunction * the system stopped *.

    Had Windows reinstalled on Dell Inspiron 1318, computer Vista laptop was working fine, then during use, the blue screen appeared with this message...

    • Hardware malfunction
    • Call your provider of support material
    • NMI: channel check / IOCHK
    • The system stopped *.

    The computer does not stop! What should I do?

    http://support.Microsoft.com/kb/315223

    The article above says that it applies to XP; but the error seems to be related to the material.

    See you soon.

    Mick Murphy - Microsoft partner

  • Hardware malfunction: NMI Parity error

    Screen blue/hardware malfunction/call your provider of support material / parity memory check error / NMI:parity / this happens more frequently

    The RAM in your computer seems to be failing. Run the memory in memory diagnostic tool by typing in the search box of the start menu by pressing Enter.

    Use the scanner on this site http://www.crucial.com/ to find out what type of memory, you have to buy if it needs to be replaced.

  • Is my PC infected with a program called "Your PC Protector".

    It seems that my PC is infected by malicious software, and if so, I want to alert other people to the problem.  I started to get a series of annoying popups on my computer tells me that the malware is detected, my PC was in danger, for example.  These have increased in frequency until they became disruptive.  Clicking on it opens a window in which an unknown part tries to sell you something called "Your PC Protector".  Finally, when I started my computer I got a green screen warning that "your system is infected, system has been shut down due to a serious malfunction.  I guess that no real company would do that.  Is this a phishing program?

    Again, the supposed software is "Your PC Protector", it is allegedly produced by a company called ADC, Ltd.  Files that are apparently causing this activity have been downloaded on my computer February 7 and 8.  When I look at them, they list no editor.  Be wary.

    Hello

    Your PC Protector is a fake antivirus, a scam to force you to pay for it, while he has no advantage at all.

    Remove your PC protector (uninstall Guide)
    http://www.bleepingcomputer.com/virus-removal/remove-your-PC-protector

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
    Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
    the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Call the scam; Error message "fault had been detected between windows 7 and Chrome.»

    * Original title: is 1866 324 6719 call a call scam?

    I was working in Chrome and suddenly the computer started beeping wildly and I got a message that a malfunction has been detected between windows 7 and Chrome.  IT gave a number without charge 866 to call and said not to stop the computer or my operating system is compromised.  And it will allow me to close the window chrome.  My gut says it of a virus, but want to be sure before we do anything.  Course of windows essentials security scan now.

    It's a scam call caused by malicious software (which is a nuisance rather than a threat). Do not call this number and in no case give some foreign to your PC access.

Maybe you are looking for