call a Subvi mode no exicution

Hi all

I need a method to call a Subvi another VI, Subvi should be mode no exicution. Can someone help me please...

on a button click Subvi is open, but it is currently exicuting all supported. I need to no exicution.

Thank you...

Why do you need it not applicable?

I'm guessing as to what you want really here.  You'll probably want an OK button on your Subvi and then have his execution code.  This would allow the user to enter the data first.  If this is the case, then you want to use a Structure of the event on your Subvi looking this OK button to press, then the logic set within this event.

Tags: NI Software

Similar Questions

  • front panel called a Subvi, which calls another Subvi

    Hello

    I'm having a problem call a Subvi main façade, where the Subvi is called other two Subvi. My two last Subvi the hierarchy have references in order to see the results on the front panel of the Subvi. While that of the Subvi References work and I see the exit, when I try to reference the Subvi references I can't see the output on the main façade.

    I don't know how to reference objects but I missed something? Thank you


  • OfficeJet 4620: HP4620 responds to all calls in automatic mode

    Apparently I never understood what the auto answer for the fax machine.  I had always had put auto answer until recently when calls non-Fax began to be answered by the fax machine. There is a telephone and answering machine sharing the same line with the fax machine.  Fax has been implemented to meet the 2 ringtone (minimum).  The answering machine has been implemented to meet 6.   I had always thought the machine waited for a signal of the fax program, which you can hear when a remote fax machine attempts a call.  If something has changed because now I have to set the answering mode manual Fax, so it does not meet a non-Fax call.

    I'm not asking what or why things have changed.  But I would like to know why HP make the truly automatic auto answer feature and only answering fax calls.

    Hello

    Auto answer means the answers incoming fax all call automatically, it does not refer to any call type detection listed in the manual of the printer.

    The printer can work between a TAM (answering machine), but must be configured properly, the fax must meet rings 1-2 after the TAM, then the fax works only if a fax signal is detected.

    I suggest to set your answering machine to answer after 4 rings and the fax after 6 rings.

    You can find detailed instructions in the following document:

    http://support.HP.com/us-en/product/HP-OfficeJet-4620-e-all-in-one-printer-series/5101229/model/5101234/document/c03148645/

    Here's the relevant section within the article:

    Follow these steps to set up the fax on a voice/fax line shared with an answering machine.

  • Graph XY what yscale.namelbl. Text does not update when vi is called the Subvi

    Software Lab that we wrote, use us (with a worm 7.1.1) a Subvi, set up to print at the end to print the results of four charts XY. Units selected in the main vi Engr is passed into the Subvi through the connector pane. I extracted the EU text here and write to YScale.NameLabel.Text using nodes property. It works very well in development by operating its own front panel, but not when the Subvi is called from the main vi. Maybe it's a known bug? With a workaround? I tried delays, separating the operations with the structures of the sequence, etc.


  • How to call asynchronous Subvi with version 8.6

    With the new 2011 version, labview has a function to start the asynchronous call, but version 8.6 is not.

    I want to call sub - VI, but not waiting for Subvi to finish before running the next step in primary vi.

    An asynchronous call to a Subvi starts the Subvi execution while allowing the data flow continue in the calling VI.

    Anyone can help on how to achieve this in version 8.6.

    Thank you

    deal 0 look like this

  • call a Subvi of a Subvi

    Hi, I'm doing a program in which I open a control panel (firt Subvi). From this Panel, I need to open another panel second Subvi). When the second Subvi is called, its façade is shown back the front of the first sub - VI, and there is no way to close any of them (none of them wroks after I opened the second Subvi). That could be the problem? Is there something that I need to configure differently for the second sub - VI?

    Thanks in advance!

    What are the display settings for the various subVIs? (Properties of VI... appearance of windows).

    Most likely #1 Subvi is modal Subvi #2 holder is not, for example.

  • Call my Subvi? what I am doing wrong

    Hello people

    I'm trying to create a simple program to read data from 3 channels, I created a main VI for the GUI and a Subvi allow the user to choose what channels he would like to make a link to the lights on the front panel.

    I did something that s look like what I joined, but I have the following problems:

    Sometimes and not all the time when I opened the main VI, I find the Subvi opening automatically without pressing the call button, in this case, I find already pressed the OK button and I can't close the Subvi, it happens all the time if I joined the vi one program exe.

    If the Subvi has been called, if try to close it with the close 'x' windows key all freeze in primary vi.

    I also tried adding other similar loops with two subvis to settings for other digital channels, and the same thing happens with them.

    what I am doing wrong.

    Thanks in advance

    There is an event for the Connect button that runs when you press it. It will be connected, but only if the Boolean value in the shift register is true, i.e. If you have configured channel settings once. If you tap on connect just after the start of the program, it does not connect.

    If you want a different behavior, you can leave out the Boolean value completely and initialize the shift register for example with default string parameters. I have fieldpoint, so I can't do right now.

  • Difficulty with returns control to the parents program after call asynchronous Subvi

    I'm trying to set up a directory of context-sensitive help for one of my programs.  This is the first time I tried an asynchronous call and I can't seem to make it work properly.

    The attached HelpDir.vi is the parent program that gives the user different help files to choose.  When the user selects a help file, its Subvi should appear.  I would like the user able to let this help file upwards and close the help directory or select another help file to upsimulataneously, if they wish.

    The strange thing is that, currently, this vi works exactly as I want if I stress execution on, but works normally, the HelpDir.vi becomes unresponsive when we help files was loaded and becomes sensitive again once the help file has been left.

    I set up the parent program with a structure of the event running asynchronous call and forget everything as in the example of the expedition to the France so I do not know why the program parent is not recover control after the launch of the Subvi.  Please take a look and let me know if you see what I'm missing.

    PS, You may need to update both static references.  I don't know if they break when you send the code this way.

    Thank you

    Tim

    Change your dialogues float instead of Modal.  Modal windows will always be on top.  In the changing Floating, then you can access the window of your main VI as well.

    Performance highlight should substitute somehow the disorder of modal window.

  • IMPOSSIBLE or CAN NOT install printer Windows 8 is called a Kernel Mode driver

    Very similar to this topic.

    None of the solutions provided works.  I wish I could get a screenshot, but it is a computer, I was working on a friend and won't go back for a few days.

    • I tried the things:
    • Download latest version of the driver Windows 8 x 64 absolute of the HP website for the printer in question (color hp laserjet pro m251nw).  Tried the two 'single driver' and «full installation» downloads
    • Tells Windows to use a driver from Windows Update.
    • There is no Citrix based application to uninstall anywhere on the computer.
    • The computer is Windows 'standard' 8 - so using GPEdit to disable "Disallow installation of printer kernel-mode drivers" was not an option (although I used a 3rd party GPEditor to try to change this setting, in any case, nothing is done).
    • I used Advanced Startup to start without driver Signature check.
    • Disabled prevents anti-virus software for to ensure that he was not.
    • I am confident that the local user on the computer had all the permissions in the menu devices and printers.
    • I tried to install everything using the "right click / Run as administrator."
      I tried to install using the XP SP3 and Windows 7 Compatibility Modes.
    • I made sure that there is no files in the folder of print reels (C:\Windows\System32\Spool\Printers\). and reset the print spooler.
    • I am able to ping the network printer and it prints the test pages, I do not believe it to be a problem with the printer itself, just a strange setting cause me all these problems.

    Help!  I'm an IT Pro, but I spent 3 hours on this and I'm not used to being totally defeated!  Haha

    Thanks in advance for any advice!

    Hello

    Thank you for keeping us posted.

    I would have you post here for assistance more.

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    We know if you need help.

  • Problem to make a call on the Tablet mode.

    Hi, I have the latest installed Skype (6.14.0.665) from the game store.
    On a Lenovo tablet with Android 4.4.2

    When the Tablet is in landscape mode, the call button doesn't seem to work.
    The screen is not damaged - it does not work right up or upside (the soft turns).
    I can very well use the call in portrait mode button.
    Also, the video call button works in landscape mode!
    I've attached screenshots to show the button of the issue.

    Can you help me?
    Thank you.


    You beat me by 6 minutes borisk3...

    Can confirm that this problem has corrected the non-operational call key.

    Mike.

  • How to change the switch case sub - VI for the Subvi all calls

    Hello

    to make the code more elegant and more reasonable, I source code, often called a Subvi. The Subvi is a box structure. If I add new cases of this Subvi thereafter, I must renew all selectors of Enum for the Subvi handmade calls. It's really annoying.

    Is it possible to pair the picker to the slot - VI for a change in the number of cases will affect all selectors automatically?

    Best regards

    Carsten

    Thank you very much. It works just perfect.

    Carsten

  • Call subVIs. Absolute or relative paths?

    Hello

    How can I know what are called the subVIs? I would like to know what type of path is used; absolute or relative.

    The brilliant solution would be if I could choose a VI and a list of its subVIs with the path close to.

    K.

    All paths are relative (even on different drives: /.. /.. / D / data / *) except for the symbolic paths (user.lib and vi.lib)

    The OpenG Toolkit has a feature called list VI hierarchy that returns an array of all VI within the call tree:

    Tone

  • Someone help me please understand what is this block? -Call Subvi

    Hi all
    During playback of a sample project a block stopped me. I could not understand what it is... once I click it (offline), it opens a Subvi, while runing the labview, it is clear that he will automatically call the Subvi. My Info is the one to call a Subvi VI main, you must use a static reference of Vi. Can someone help me understand what about this block?
    I am attaching the picture of her and a container VI she also well... Simply open the block diagram of the file: "Caller.vi"... The Subvi associated with this block is fixed as well: "Config.."

    I would like to know what is this block name, how it is related to the Subvi and how the Labview call it automatically. .. I really appriciate any suggestions.

    Thanks in advance

    Concerning


  • call Subvi producer/consumer using vi main to gain the image capture

    Hello world

    I don't know if I get the notion of producer/consumer harm. I tried to write a producer/consumer Subvi that simulate continually grab get the image. When I call the Subvi hand while loop with a main vi, it seems to face an infinite loop. I wonder what someone knows how can I activate a Subvi producer/consumer using primary vi? Thanks in advance.

    Kind regards

    Han Yen

    Bettter use this one.  The one above has a 'small' mistake

  • Cannot dynamically include called subVIs in construction

    Hi, I have a VI that calls some Subvi - i.e. by reference dynamcally.

    I am now building an application and loking for this manual for help (I'm using LabView 2012):

    This link http://digital.ni.com/public.nsf/allkb/410F2EC66F60F9B0862569EE006F4FA0 has similar instructions:

    However, my problem is that I can't click on the arrows in the window. This window for me looks like this:

    and no arrows are clickable and no help by adding the dynamic subVIs!  For example, when the application is built, it is malfunctioning.

    Would appreciate any help you can provide on how to address the issue.

    Thanks in advance!

    Hi SensLab,

    When you use a project LV then you would be able to include all the necessary screws when building!

    BTW. Dynamically called screw should be included in the project too...

Maybe you are looking for