Call Java DAQmx.dll: Y at - it a new version of the DAQmx.dll NET c# for CLR 4.0 library

Similar Questions

• After downloading the new version of the program unexplained antivirus, file db called "thumbs" on the desktop

  After downloading a new version of my antivirus program (rising), restarted my computer, there was a file of database on my desktop called "thumbs".  I don't know where it comes from or where it should be!  When I went to remove it out of the office, I get a box that says "a file of database is part of your operating system and if you delete it you could cause damage, you're sure you wwant to remove?  of course, I said no, but I can't seem to get rid of it.  I even uninstalled the program updated and who does not get rid of it.  I also tried to restore the system to a previous point, but I get a message that the system restore is incomplete, try to choose another date, but no other dates or hours are no longer works!  Help

  Thumbs.DB is a normal part of Windows, and has nothing to do with your antivirus program.  It is a hidden file that contains thumbnails of the pictures stored in a folder (and the office is a folder).  It is safe to delete the Thumbs.db , because Windows will automatically re - create if necessary.

  To not see the file, go to Control Panel > Folder Options > view and select show not the hidden files and folders .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Whenever I call a VI I get old data with new data in the table

  I selected 'clear indicators when it is called' in my properties VI, execution. Yet, whenever I call the VI, the table of data is growing. My main VI implements my USE, and then call the sub - VI, which sets up an instrument measurements, then reads the results and transmits data. I then change the UUT to the next State and repeat the same task sub - VI to get again the same measures. The main VI changes the mode of WEAR it three times, so call the sub - VI three times. The last call of the Subvi back all three sets of data together, which is OK. My problem is, when the main VI ends and I run another USE, I get the new set of data as well as the complete list of data from the previous run. I found a similar problem answered here on the forum who suggested I should 'clear indicators when it is called', and so I did. It still has not fixed my problem. Any idea?

  Try this, for example:

  

• DLL system error not allowed illegal I tried KB935448 difficulty but get message I have a newer version of the file a custom to consider.

  Error occurs with the calculator, VLC Media Player so far

  If you have installed SP3 on your Windows XP, the file is more recent and you don't need this patch.

• on port 162 java.exe running. I tried to kill him with the command prodess k 1289. 1298 here is the process ID. but it comes back again. I need the port 162 for sending traps.

  original title: port162

  Hi, on port 162 there is a process called java.exe running. I tried to kill him with the command prodess k 1289. 1298 here is the process ID. but it comes back again. I need the port 162 for sending traps. I first removed java completely from my pc, but still there was this java.exe. in fact, there are two java.exe if I check in the running task manager. need help. I also ran antivirus as well as anti-malware software, but no difference.

  Hello

  I suggest you to visit these links and check if it helps:
  http://www.Java.com/en/download/uninstall.jsp
  http://Java.com/en/download/help/regkey_addremove.XML

  Have you tried to change the port to Java? See this link:

  http://www.Java.com/en/download/help/proxy_setup.XML

  It will be useful.

• Get the 1097 error when trying to call a Labview DLL

  I had to write a wrapper DLL to use some functions in the DLL to a third party, and I'm having a few problems. I created an executable to test my code and it works fine, but when I try to execute the same function in the DLL that I created in Labview, I get error 1097. I read through most of the posts on this forum about this issue, but none of the proposed solutions are working for me. I'm sure this isn't a question of transfer settings to COLD LAKE because I changed the function so it only accepts a single entry (a number he obtains from a Subvi, which came from the third-party DLL, this entry is working with a bunch of other functions, so I don't think that is the question).

  I have attached the C code that creates the wrapper, but I don't know how it is useful without familiarity with the functions of the original DLL. I hope that someone can spot something basic I am out of my code, but please let me know if I need to call something else.

  I use a Labview 32 bit version 2012 on a 64-bit Windows 7 computer.

  Thanks in advance for any help!

  You should read the documentation on LoadLibrary() and understand. Essentially if you provide a full path to LoadLibrary() the DLL MUST be present at this place so that LoadLibrary() will succeed. If you pass only the name Windows DLL will ONLY search in these places:

  (1) if the module (the DLL) is already loaded it will return a handle to the loaded module and increment its reference count

  (2) if the referencing module contains a manifest (either incorporated into the image module or in a separate manifest file in the same directory as the executablemodule) specyfying a version number for this DLL will load this DLL with this version of the SxS (side by side) location and failure if it is not present

  (3) if the executable load contains a manifest (either incorporated in the executable file or in a separate manifest file in the same directory as the executable file) number specyfying a version for this DLL, it will load this DLL with this version of the location of SxS (side by side) and fail if it is not present

  (4) it will search for the DLL in the same directory as the directory where the current image of the process is loaded. It is NOT the directory of the DLL loading the DLL, BUT the directory where the EXE file from which the process was created.

  (5) in the system directory

  (6) in the Windows directory

  (7) any directory in the PATH environment variable

  (8) the path of current directory which is a location managed by windows by process and changed the two explicitedly when the application calls the API SetCurrentDirectory() but also implicitedly by things like the file selection dialog whenever it is rejected by other means than the undo operation.

  Essentially putting your dependend DLL in the same directory as the wrapper DLL does NOT work when you use the name of the DLL only UNLESS you place the two DLLs in the same directory as your executable file. If you don't want this restriction and want to be able to move these modules together in different directories, you don't have to create the correct path in your wrapper to LoadLibrary(). Basically, you must have the code to determine the location of your DLL wrapper path and then strip her own name and add the DLL name wrapped in it and then move to the LoadLibrary().

  There are several ways to determine the path of the current module. The simplest if you don't mind having the name hard-coded in your code DLL would be to ask GetModuleFileName (GetModuleHandle ("yourDLLname"), buffer, size).

• The DLL call fails when DLL uses a wide range

  I call a C++ dll in LabVIEW 32-bit on Windows 7. I kept getting error 1097 and finally understood it is because the dll uses two large paintings of 5 MB each. The tables are initialized in the constructor of an object, malloc is not used, or whatever it is. If I do the smaller berries, then everything works fine.

  The problem is not difficult to work around, now that I know what is the cause, but can someone tell me why a dll using a lot of memory would be a problem? I feel that 10 MB is really a lot of memory to use on modern computers.

  OK, you can test the appeal of the DLL in a Visual Studio test harness?

  In addition, in case you haven't seen another 'DLL error 1097' son type, here are a few. The cause of 1097 in your case can be illuminated by a multitude of courses of troubleshooting:

  Call dll error 1097

  Error code coming 1097 in DLL call

  error 1097 after the call dll function that allocates memory inside

  1097 error in the transition from table from C++ DLL for LabView (seems very relevant, although long)

  I know there are a lot of reading, but there is a good chance that the magic trick is in one of these threads already. We will ride on the shoulders of their work.

• Call a COM DLL from a READER plugin

  Hello

  Is it possible to call a COM DLL from a READER (from a technical point of view and license) plugin?

  Thank you

  1. from a licensing perspective, it depends on what the DLL.   One of the criteria for the granting of a license of the player depends on if the plugin is the feature that is present in the Acrobat product or not reproduction.

  2. If the user is running in Protected Mode (aka sandbox, by default), then you also have a white list of your plugin to be able to do.

• How can we call java methods in ODI?

  Hello
  
  I have java jars.i would call java methods of ODI
  
  how it is possible in ODI?
  
  Please help consider myself the same
  
  Thank you

  Version unsupported major.minor 50.0

  error comes when you use different java version 2

  version 50.0 means also that you use a class that are compiled with the help of JAVA 6
  Try to run ODI with JAVA 6

• Calling functions in DLLS in LabVIEW Real-time

  Hello

  I have LabVIEW Real-time version 8.20 with PXI hardware. This uses Phar Lap ETS RTOS and support DLLs written in Microsoft Visual Studio 6.0 and Visual Studio .NET 2003. My question is if I upgrade to the latest version of LabVIEW Real-time, can I use later versions of Visual Studio to write DLLs?

  Search the OR web site all them I can find is that the version of the FTA has changed.

  Is it possible to use vxWorks on PXI hardware?

  Hello Paul,

  Lets try this again:

  How can I check that my DLL is executable in LabVIEW Real-time?

• New version of Java 7 udpate 40 download on firefox

  I can't download Java 7 update 40 on firefox (or IE).
  I tried everything suggested in the forum here and get the same message:

  "The connection was reset while the page loading..."

  (All my other pages/research charge very well).

  It seems to have started when my pc did an automatic update of Windows 9, when nothing else worked, I therefore uninstalled Windows 9 and am now under Windows 8, but Java still doesn't work do not.
  I uninstalled the old version of Java in my programs.
  including all the 'toolkits' etc. You don't know if it was the right idea, but now...
  I checked activate java in all the internet options boxes etc as said on the forums.

  My Windows Vista is running on 32-bit operating system - has always...
  Could be the problem? The new update of Java 7 is 64-bit?
  However, when I try and follow the instructions on the Java site to download for 32-bit.
  I get the same problem and the same standard page showing me there was a problem connecting etc...

  I don't know if it's a problem of Firefox or an IE one? It will not download on IE... and I checked all the boxes it etc, tried to disable the firewall etc...

  I see on the Firefox plug-ins, called tookkit of java is disabled due to security and I can't change this setting... that is the problem?
  I just, laymans pc notions... can.; "t make things complicated, but is it something simple, I have wrong here or is this a fault of well-known firefox... with this Java?
  If that's what should I do next?

  Thanks v more
  Rhian

  I had the same problem on Saturday, Oct. 12, and Sunday, Oct. 13. However, I was able to download and install update 40 this morning (Monday, 14 October) successfully. It must have been a problem with the Java download site as there is problem in Firefox and IE, and it seems to be fixed now.

• My computer will not start, getting warning that the iertutil.dll is missing for Internet Explorer

  Anyone know how to fix this problem? I get a warning saying that the iertutil.dll file is missing for internet explore. When I start my computer, all I get is my screensaver with no office. The only way I can continue any part of my computer is to go to alt del to get to the control task manager.

  Do you mean you see a message like this:

  Explorer.EXE - unable to locate component
  This application has failed to start because iertutil.dll was not found. Reinstalling the application may fix this problem.

  That file should never be missed and it takes an extra effort to remove it on purpose because there are one of 3498 files who cares about Protection of file Windows (WFP).

  If explorer.exe is not running, all you will see is your screen background image.

  The file is in this folder (assuming that XP is installed on your C drive):

  c:\Windows\System32

  Since you can get into the Task Manager do the following:

  Since the Task Manager, click file, new task (run...) and then click Browse and navigate to this folder:

  c:\Windows\System32\dllcache

  If you are unable to find or do not see the dllcache folder, because your system is not configured to display hidden files and folders, simply type the path to the folder name in the "Open:" box

  c:\Windows\System32\dllcache

  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate copy the iertutil.dll file backup in the folder c:\windows\system32\dllcache, made a right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  If you can't find the file in the dllcache folder (should be), depending on your installation, there may be a copy of the file on your system in this folder:

  c:\windows\ServicePackFiles\i386

  If you find there, copy the file missing from there and paste it where it belongs

  It is possible that some malicious software or your antivirus/antimalware indeterminate quarantined (actually deleted) the right file and the backup copy of which must be in the dllcache folder.

  In this case, you can download a copy of my SkyDrive and use networks disks (on foot) to bring it to the system afflicted on a USB key or a floppy disk.

  You may be able to 'Run' iexplore.exe in the Task Manager to get on the Internet and just download it.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Since it is all very suspicious to meI would follow with this:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How to get the version of the vcloud director in the Java development kit

  Hello

  I'm trying to get the version of the vcloud director of IPY. I am currently using

  customer. Login ("administrator@System", "dangerous", client.getSupportedVersions () .get ("1.0"));

  to get the version... but I want to get the version of the VCD not the version of the api... I use the VCD 1.5 and 1.0, so according to the investigation period, I need to go get the VCD version.

  Thank you

  Kiran

  Hi Kiran,

  The object that is returned when GET-ting/api/admin contains a element indicating the version of vCD. It is available in both API 1.0 and 1.5.

  Because I'm not very up-to-date with software development kits, someone familiar with the Java SDK can direct you to the class concerned representing this API call.

  Kind regards

  Todor

• How and where to use Java script to create a new button in the page of detail of the object

  Hi all
  
  I want to create "New/Add button" in the page of detail of the object. If I'm not mistaken I need to use the java script for this, but could you please let me know how and where to use Java script to create a new button in the page of detail of the CRMOD object.
  
  Thanks in advance.
  
  Kind regards
  Manish

  Any related object on the details of the page should have an 'Add' or 'New' or the two default buttons - it of a vanilla feature and will do the required action.

  If you want to change this behavior and do something delicate you will potentially have to to go for javascript. You must add the javascript code in a web custom tab on this object.

  Admin--> Application Customization--> Contact--> Applet Web Contact

  Now add your javascript in the code box, after selecting the type = HTML for this web applet, expose this web applet on the Contact details page layout and your javascript will be called every time this page is loaded.

  Check this document online to see how javascript can be integrated into the CRM on demand http://helponmyproject.com/TTOCOD/

  See you soon!
  Royston

• java.io.EOFException: met premature EOF when reading Version

  Hello!
  
  We are trying to call external upside down on the other side of the BPEL.
  This WS binding is < http:binding verb = 'GET' / >
  
  As a result, we got an exception:
  
  < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" >
  -< name part = "summary" > < summary >
  
  com.collaxa.cube.ws.wsif.providers.http.WSIFOperation_HTTP@b7bf29: could not invoke "GetAllMessages." nested exception is:
  java.io.EOFException: met premature EOF when reading Version
  
  < / Summary > < / piece >
  -< part name = "detail" >
  < detail > java.io.EOFException: premature EOF when reading Version < / details >
  < / part >
  < / bindingFault >
  
  Enybody knows what that means?
  
  BPEL service works for a long time,
  But today we descry this boredom.
  
  Than you!

  A bindingFault lie that the parameters you send are not correct. Can you call this webservice via SOAUi and compare that in your BPEL process.

  Marc
  http://orasoa.blogspot.com