Call monitor

Similar Questions

• How to disable "Call Monitor" in Skype for desktop 6.16.0.105

  How can I turn off the monitor 'call? ' I find a totally useless and distracting feature which is just in the way.

  Thank you

  Open tools-> Options-> call-> Show advanced settings options. Uncheck the option: "Show control when Skype is in the background.

• Call monitor and auto hang up

  Hi everyone, this is my first post here. I just got a BlackBerry Pearl 8110 in Mexico with a package data unlimited and unlimited calls to 10 numbers from the same company, just as long as they are less than 5 minutes. So, I was looking for an application that could let me know what is the duration of a call, say 04:20 and end the call automatically at 04:50 (configurable of course).

  I could not find such an application (I don't mind paying for it) so I decided to code myself. After a bit of the read API I looked at the PhoneListener interface that would provide the necessary events (callInitiated, callConnected, callDisconnected) and its implementation, the phone class that would allow me to inject a DTMF tone in the current call or at least he says in his description, but I could not find a method to do this injection of DTMF.

  My main question is, how can I develop an application that should start automatically when a call is received? I like to work when a call is initiated by the use, the application looks in its database of numbers to find out if the dialed number is included in the list of 10 numbers. If this is the case, start keeping account of the duration of the call. If the call reaches the soft limit, inject the DTMF tone and when it comes to the hard limit, end the call automatically. Is it possible to have an application daemon-like on the blackberry that listens to the calls began? and if so, where do I find tutorials or documentation?

  Thank you very much!

  Hello!

  Just to answer a few questions:

  1. the request of deamon, I suggest to have the application running all the time and setting to run at startup of the device. To do this, you will need to make some adjustments in the JDE. Do a search on this forum and you will find...

  2. the list of the 10 numbers. You could do an application user interface which maintains these numbers in a list. Then, for each call, you can compare the number called against the list. If so, do an action...

  3. to end a call, you can use injection of the event. Take a look on this forum and good luck!

  BR,

  Isabelle

• Color management - OK to set monitor color sRGB profile?

  Is there any problem if I set my monitor color profile for sRGB and Photoshop recognizes this and I use ProPhoto RGB as my workspace in Photoshop?

  Background:

  I got a general problem with color management where my pictures looked darkest in Photoshop then my Windows Photo Viewer by default or in Adobe Bridge.

  I did some research and finally fseemed to solve the problem, but I'm not sure on any of my settings.

  I use Windows XP, and the first great help came through a panel of color that you can download from Microsoft.

  Here is the link: http://www.microsoft.com/prophoto/downloads/colorcontrol.aspx

  This utillity adds a panel color settings that you can access through the control panel. It's main characteristics are that it allows you to assign color profiles to devices, such as your monitor or printer.

  I'm using Photoshop CS4.  If you open the color settings dialogue box and look under the section workspaces, you can choose your workspace for RGB in the drop-down list. From my research, and since I'm editing photos, I concluded that choose Adobe RGB or ProPhoto RGB is a good choice.

  Also on this drop-down list, there is a choice called Monitor RGB. From my research, the opinion is that you should not set that as your RGB working space. However, a tip I've met is that if you look at the Monitor RGB choice it will tell what Photoshop is grateful as color of your monitor profile. For example, it will say 'Monitor RGB - Dell 217'

  Now, after the installation of the utility of color of Windows I am now able to define the color for my monitor profile. What I put is then recognized by Photoshop if I see it on this list.

  Specifically, in my utility of color I set my monitor to use the sRGB color space. Now when I go into Photoshop and color Setings and go dialog where you set the RGB workspace, I click the menu drop down and the list will be "Monitor RGB - sRGB IEC61966 - 2.1.»

  Note: I did not choose this as my RGB color space, I will just here to check what Photoshop is to see with regard to my color space of the monitor. I put it to my RGB color space to ProPhoto RGB.

  My monitor is a monitor de LCD Samsung 172 T.  Regarding the calibration of the monitor, I don't have access to a colorimeter device. From my research, I have found that by using the calibrator of software called Adobe Gamma is not designed to calibrate or profile LCD monitors.

  What I did: I use a graphics card based on nVidia with a control panel. The Control Panel has a display optimization tool. I used.

  Once again, my question-

  In the utility of windows color, I put my monitor color profile to sRGB. Was it the right choice?

  I have set to another profile that I have available called "Samsung 172 T."  But I do not know from which it came. Not sure if it was generated using Adobe Gamma a few years back, or the manufacturer.

  When I went to that profile my screen gets darker. Note: when I turn on in the Windows color configuration utility, then go in Photoshop, I can see in the color settings dialog box it now says "Monitor RGB - Samsung 172 T.

  I know that if I had a calibrator type colorimeter I would be able to generate an accurate profile for my monitor. In this case, you would set your monitor to this profile, rather than sRGB?

  Tom,

  Unless you have a crap monitor which is incapable of contoured with precision, never set your monitor profile to an independent color space of the device as sRGB.

  Calibrate your monitor with precision, regularly and often and use the monitor resulting as your dependent monitor of the device profile.

• Does a flag messeges

  Is there a function to allow me to mark messages for follow-up?

  One option:
  You can create a tag called 'Monitoring' and then apply this label to any email.

  To create, change, or remove tags
  Location of the menu: Tools > Options > display > Panel tags

  You can also sort by tags to identify them easily.
  Add the TAG column header
  then click on the header of column or view > sort by > Tags

• Qosmio X 770-screen external of ZR2740w would have worked correctly?

  Hi guys,.

  with my old monitor giving up - I'm looking for a new external monitor connect my Qosmio X 770 to.

  Because of that I am interested in the ZR2740w monitor.
  But I don't know if the called monitor will work properly and at full resolution with my Qosmio.

  The ZR2740w complete resolution is 2560 x 1440 and specifications for my Qosmio (http://www.toshiba.eu/discontinued-products/qosmio-x770-107/) say that the res maximum support an external monitor is 2 048 x 1 536, but nVidia (the manufacturer of the graphics card) said that their GeForce® GTX 560 M supports the flat displays up to 2560 x 1600 (http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-560m/features).

  Seeing that I don't have anyware to try this comibation before I acutally buy the ZR2740w - I wonder if you have any adavice?

  This combination works ok?

  Thank you.

  JJ

  You will be very happy if someone on this forum has the same laptop Qosmio and use this external screen and can send comments.
  In my opinion you have to buy and test at home or talk with your local dealer and test it in the store.

  In the worst case you can return. I put t know how it works in your country, but generally you have 14 days to return the product if you are not happy with it.

• No option for office expanded in display settings

  Windows XP Home Edition, SP3.  ATI Radeon 9200 graphics card.

  I want to connect my TV to my PC.  The primary monitor is connected to the graphics card VGA port, and I have a DVI cable to HDMI connecting the DVI port on the card to an HDMI port on the TV.

  Right now, I have the same picture displayed on the monitor and TV.  I would like to run in extended desktop mode, with the monitor as master.  However, when I go to DISPLAY PROPERTIES > settings, showing a screen instead of a [1] and a [2].  It is said above the "Screen Resolution" slider "display: (multiple screens) on RADEON 9200".»  I have no option to turn on the extended desktop on this screen.

  In Device Manager, I have two monitors showing.  One for the SONY monitor supplied with the PC and the other is called "monitor Plug-and-Play '.  I tried to update these two, but he comes back without there is no versions to install.

  Where should I go from here?

  Hi db88inTX,

  See the link below and make them sure that all connections and settings are correct.

  Expand your workspace with multiple monitors

  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/monitors.mspx

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hp p1102w LaserJet upper tray: howto

  Hello, as subject has said, I have a hp 1120w, I pointed out that there is a double-sided option assisted, so when I decide to use it I have to manually move the paper...

  Well I see that there is a second tray of papert, superior of the first, how do I use it? Why are there?

  Thank you

  Alessio

  If you are referring to the right of the slot above the paper tray, then this is called "monitoring power slot." This would be used for special media (envelopes, labels, paper thick, etc.).

  Please let me know if you need more information.

• Shell permission command to the device using NDG sets?

  Hello. I have configured NDG, there is a group called "GR1" with 30 switch.

  This group is set up a command authorization set Shell called "Monitoring", which don't show commands, ping and traceroute are allowed.

  I want to let the users to pass in only 10 of the 'GR 1' group set up some interfaces and IP addresses, go to the other does not. ! Note: The number of interface is not the same for each switch can be FA0 / 1, but for others it can fa0/3.etc.

  I want to keep these 10 switch within the group "GR1", it is possible to do this configuration?

  -Thank you

  I edited my post above to make it clearer. You can assign auth sets. Shell the user, group, or level NDG. More details are mentioned on the following link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SPC.html#wpmkr697610

  AFAIR, one device (AAA Client) can be part of only NDG, so you can't get your condition using by NDG Shell command authorization sets. Unless you break the NDG in NDG more than one.

  You can assign authorization at the level of the user or the Group (after the appropriate group users) to achieve your requirement.

  You can also use the 'privilege' on the switch command to ensure that users can only see the commands you want. For example, when a user connects it will be placed on level 7. Now you can keep unwanted orders at level 15 and lower orders you want to level 7. All other users would receive a lower level (e.g. level 5), so they will not be able to run these commands.

  Concerning

  Farrukh

• SX20 - dual display does not work as expected

  Español version. Spanish version

  Hola a todos.

  I have a Cisco SX20 dumb terminal license dual display. Tengo tambien UN con C20 the same license.

  1 - Cuando el C20 esta idle muestra el video en ambos monitored, TR dá local PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  2 - Cuando el esta SX20 slowed muestra el video local solo el monitor 1, TR dá a PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  3 - Cuando el C20 Esta en llamada, el video remote is ve en el monitor 1 y el video local to ve en el Monitor 2. Al compartir el monitor 1 muestra el contenido video remote y del video PIP local, el Monitor 2 muestra el contenido.

  4 - Cuando el SX20 Esta en llamada, el monitor 1 muestra el video remote y del video PIP local, el monitor 2 gray hasta permanent that envia contenido.

  Al final dejo lo descrito representando imagenes.

  How puedo hacer para as local video el y remote del SX20 is monitored separately cuando en muestre no is envia contenido?

  Esta el archivo del terminal config Editor

  English version. Frances version:

  Hello, everyone.

  I have Cisco and C20 SX20 endpoints. Both with dual display of the license.

  1. when the C20 is inactive, monitor 1 and 2 show the local video. If I connect a PC to the content source and then the monitor 2 shows.

  2 - when the SX20 is idle, just monitor 1 local video shows. If I connect a PC to the content source and then the monitor 2 shows.

  3. when the C20 is a call, 1 shows the remote video monitor and monitor 2 local video. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  4 while the SX20 is a call, monitor 1 video shows distance and PIP local video, monitor 2 gray yet. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  At the end are 2 pictures that show the problem.

  I want to watch the video video in separate screens where the content is not sharing (SX20) remote and local. How can I do?

  The xconfiguration endpoint is attached.

  Note: Sorry if my English is not so good.

  Sharong content:

  

  No sharing of content:

  

  I hope you can help me. Thanks in advance

  Hello Sharong-

  Change the following two parameters on your codec, and this should help you to what you want.  When TC6 came out and Cisco introduces new options of selfview, it changed how the codec have behaved and treated the selfview when using dual display.

  Video SelfviewDefault FullscreenMode: OnVideo SelfviewDefault OnMonitorRole: Second

  When content is sent, it will display on your secondary display selfview becomes a GLITCH on the first view  OnMonitorRole will on your second screen selfview when content is not displayed, and modepleinecran make selfview display full-screen when it is on the second screen instead of a PIP.

  For more information, you can take a look at the following bugs: CSCuh04746 and CSCuf74115.

• VCenter shows a network for a virtual machine that is not associated with any host

  I have a win2k3 VM who at one point had a network assigned to him called "MONITORING".  This network is configured is no longer in the ESXi (5.5) environment.  The virtual machine is connected to a network called "PRD-SURVEILLANCE" which is correct.  It's not really cause a problem, but I can't find a way to get rid of the object of MONITORING network.

  In VCenter MONITORING networks has a VM of 1 meter, the number of hosts of 0.  I also see it in the VM - dialog box, change the settings, but there is no option to remove it.  Profile Image to the virtual machine is version 10 so I can't use the old Client of VI to try to remove it.  I have checked each host and do not see this listed network object.

  I tried to restart the VM, it migration between hosts, changing its network of SURVEILLANCE of PRD to another network and vice versa and close - remove NIC and add a new card network.  MONITORING legacy network still appears in the config.

  For the virtual machine's .vmx file shows that the correct network: ethernet0.networkName = 'RDP-ANALYSIS '.

  Any suggestions on how I can remove the artifact of MONITORING network?

  The virtual machine has a preview that was created at the time where the MONITORING network was still affected?

  André

• Tab variables sensor

  Hello experts,
  
  I develop a BPEL process where I need to use sensors.
  Why, in jdeveloper 11.1.1.3PS2, the sensors tab is not present in any variable dialog box (create, modify, etc.) or in any activity.
  
  Thank you
  José Cruz

  Hi Jose,

  SOA Suite 11 g PS2, Jdeveloper (11gPS2) will be 3 times for a BPEL process.
  3 points of view are
  Normal view BPEL
  Monitor
  BPA
  There will be an option on the upper right corner of the view of BPEL process to select the different points of view. The sensors are not visible discovers more under the tabs in the activities or structure. This has been moved and grouped in a view called monitor which will help you in the creation of sensor and sensor events and publish on different destinations. There are a few new features such as indicators, counters and intervals introduced to the process and business management.

  So when you click on the screen, on the structure pane u would be able to see the options for creating sensors.

• Interact with flash html documents

  Hello

  I am a newbie in actionscript. I created a map of the world in flash. The map's regions (Europe, North America, Latin America, etc.). The areas on the map are defined as buttons.

  The final flash map will be incorporated in a document html (map.html). The idea is that, when you click the 'Europe' button on the flash animation for example, this will open an html document called Monitoring/regional_monitoring/Europe.html and it will show below the flashcard (inside map.html).

  Le "Monitoring/regional_monitoring/Europe.html"for example contains a list of countries. "

  In this mission, I have 2 problems:

  1.       What script that I need to attach to each button of the region on the flash card so it will call the right HTML in the div on the map.html?

  2.       This script should I put in the html document?

  Any help will be much appreciated. Thank you

  M Arie.

  affect your button instance (in the properties panel after you select your button) a name and use that name in the Panel shares:

  yourbutton.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  navigateToURL (new URLRequest ("map.html"), "youriframe")

  }

• tab "Sensors" missing Jdev 11 g

  Hello
  I use JDeveloper 11.1.1.2.0 and I need to create a BAM sensor.
  
  I am following the tutorial included in this Book: http://www.oracle.com/technology/products/soa/soasuite/11gthebook.html
  
  at page 391, first line says: "click the sensors tab to start the process of adding a new sensor.
  
  but on my JDeveloper, there is no tab for sensors...
  
  You have no idea what's going on?
  
  Thanks in advance
  
  Kind regards
  
  Neuquino

  Hello
  On JDEV 11.1.1.2, we now monitor features in another perspective. So in the view of BPEL, select the drop down at the top right and select monitor Perspective. You will be able to adjust sensors here. In addition, we have created a feature called monitor Express in this version which allows you to use on the box for your BPEL process BAM dashboards.
  You can find details on http://www.oracle.com/technology/products/integration/bam/collateral/new%20features%20in%20bam%2011gr1ps1.pdf.
  Concerning
  Poyard

• Cross tab with several expandable columns

  Hi all
  
  I develop a cross tab report... is my example of xml file
  <? XML version = "1.0" encoding = "UTF-8"? >
  rowset <>
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - Back-Office < / DD_CODE >
  < NOTE_DATE > 12 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - Back-Office < / DD_CODE >
  < NOTE_DATE > 11 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - Back-Office < / DD_CODE >
  < NOTE_DATE > 14 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - Back-Office < / DD_CODE >
  < NOTE_DATE > 112 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - monitoring < / DD_CODE >
  < NOTE_DATE > 121 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - monitoring < / DD_CODE >
  < NOTE_DATE > 122 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - monitoring < / DD_CODE >
  < NOTE_DATE > 131 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > Call - monitoring < / DD_CODE >
  < NOTE_DATE > 111 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - Back-Office < / DD_CODE >
  < NOTE_DATE > 11 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - Back-Office < / DD_CODE >
  < NOTE_DATE > 143 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - Back-Office < / DD_CODE >
  < NOTE_DATE > 122 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - Back-Office < / DD_CODE >
  < NOTE_DATE > 111 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - monitoring < / DD_CODE >
  < NOTE_DATE > 1432 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - monitoring < / DD_CODE >
  < NOTE_DATE > 112 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - monitoring < / DD_CODE >
  < NOTE_DATE > 121 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  Visit Site < DD_CODE > - monitoring < / DD_CODE >
  < NOTE_DATE > 123 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > visit - WDE Office < / DD_CODE >
  < NOTE_DATE > 123 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > visit - WDE Office < / DD_CODE >
  < NOTE_DATE > 1321 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > visit - WDE Office < / DD_CODE >
  < NOTE_DATE > 1312 < / NOTE_DATE >
  < / ROW >
  < ROW >
  Product < NAME > < / NAME >
  < DATE > 2008 - 05-01 T 00: 00:00.000 - 05:00 < / DATE >
  < TYPE_CODE > < / TYPE_CODE >
  < MOST_RECENT_NOTE_DATE > 1 < / MOST_RECENT_NOTE_DATE >
  < DD_CODE > visit - WDE Office < / DD_CODE >
  < NOTE_DATE > 211 < / NOTE_DATE >
  < / ROW >
  < / LINES >
  
  If I use the cross-tab Wizard... I get the following output...

  -------------Call - Back Office-------Call - Monitoring-------Site Visit - Back Office-------Site Visit -Monitoring-----Visit - WDE Office
  product              12                      121                       11                                    1432                   123
  
  but I'm looking for output like...
  
  -------------Call - Back Office-----Call - Monitoring------Site Visit - Back Office------Site Visit -Monitoring-------Visit - WDE Office
  product-------12 11 14 112-----------121 122 131 111----------11 143 122 111------------------1432 112 121 123 ---------123 1321 1312 211

  The figures in each column are dynamic... I might have 2,3,4... (In this case, all are four)... I looked at the link below, but he had static 2 repeat columns... but in my case, the columns of repetition are unknown...
  http://winrichman.blogspot.com/2008/09/crosstab-with-multiple-repeating.html
  Is is possible to build a cross- like this tab... ?
  Thanks in advance...

  Hello
  Email me at colectionaru at gmail dot com
  I'll watch your xml and post a solution here.

  Kind regards
  Colectionaru