Call of Duty 1 download not additional mods on the server

Similar Questions

• How to set up dreamweaver so it downloads not specific files on the server as the photoshop files

  Hi, I would like to know how can I set up dreamweaver so it downloads the server specific files such as photoshop files when I type "Put".

  Thank you

  See concealment

  Hide files and folders of your Dreamweaver site

• (Initialization error: cannot load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the appropriate folder). "

  After installing this game on a dell Inspiron 1545 computer, when I try to run the game, it starts to market and then, this error message

  "Error during initialization: failed to load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the correct folder"

  By Teknogods

  If it is a file that may be missing I will have to check see if I can find it online.

  All the tips are more grateful, thank you.

  Teknogods is the source of the problem, not the game of basic or Windows.

  When using mods, that you'd better ask your question on the Teknogods or similar modding forum.

  .

• I am part of a team, but the software is downloaded in trial mode and the full product?

  I am part of a team, but the software is downloaded in trial mode and the full product?

  Hello

  It may be due to the following factors:

  1. you might have not accepted the invitation of the team. Please see creative cloud for teams FAQ: How can I manage my account teams?

  2. it might be an activation error. Please see Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  Hope that helps!

  Kind regards

  Sheena

• Satrtup admin server fails with the error user weblogic is not allowed to start the server

  Hello

  The server administrator is not come, his failure with the error below.

  < 25 may 2014 10:28:35 PM PDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.

  weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  Truncated. check the log file full stacktrace.

  I tried to reset the password by link, below, it has not helped. Always face the question. Help, please

  http://www.WebLogic-tips.com/WLS-security/

  Thank you

  Pradeep

  Hi all

  It worked after you run the java command in the Security directory. When setDomain.sh term, it redirects to DOMAIN_HOME. From there, go to the directory of securities and run the java command to reset the password.

  Thank you

  Pradeep

• JDeveloper is not able to find the server SOA

  I am trying to deploy Hello World BPEL project in Jdeveloper 11.1.1.6.0 to 10.3.6 stand-alone Weblogic Server. JDeveloper is able to the list of managed servers running (admin server and soa-server). However, it is not able to find the server of the SOA. I checked that soa-infra is running.
  While trying to find SOA server, it fails with the exception of Null pointer with the following stack trace:
  
  java.lang.RuntimeException: java.lang.NullPointerException
  at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:89)
  to oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer. < init > (WeblogicSOAServer.java:68)
  at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listWeblogicSOAServers(ASBrowserHelper.java:275)
  at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listSOAServers(ASBrowserHelper.java:201)
  to oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper$ RunnableListSOAServers.run (ASBrowserHelper.java:333)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.NullPointerException
  at java.util.StringTokenizer. < init > (StringTokenizer.java:182)
  at java.util.StringTokenizer. < init > (StringTokenizer.java:219)
  at weblogic.utils.StringUtils.splitCompletely(StringUtils.java:119)
  at weblogic.socket.utils.ProxyUtils.getProxySocket(ProxyUtils.java:178)
  at weblogic.socket.utils.ProxyUtils.getSSLClientProxy(ProxyUtils.java:235)
  at weblogic.socket.SocketMuxer.newSSLClientSocket(SocketMuxer.java:396)
  at weblogic.socket.SocketMuxer.newSSLClientSocket(SocketMuxer.java:414)
  at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:82)
  at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:119)
  at weblogic.socket.BaseAbstractMuxableSocket.createSocket(BaseAbstractMuxableSocket.java:133)
  at weblogic.rjvm.t3.MuxableSocketT3.newSocketWithRetry(MuxableSocketT3.java:214)
  at weblogic.rjvm.t3.MuxableSocketT3.connect(MuxableSocketT3.java:383)
  at weblogic.rjvm.t3.ConnectionFactoryT3S.createConnection(ConnectionFactoryT3S.java:44)
  at weblogic.rjvm.ConnectionManager.createConnection(ConnectionManager.java:1784)
  at weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.java:1424)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:443)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
  at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
  at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
  at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
  at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
  at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
  at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
  at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
  at weblogic.jndi.Environment.getContext(Environment.java:315)
  at weblogic.jndi.Environment.getContext(Environment.java:285)
  at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
  at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
  at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
  at javax.naming.InitialContext.init(InitialContext.java:223)
  to javax.naming.InitialContext. < init > (InitialContext.java:197)
  to oracle.soa.management.internal.facade.ServerManagerImpl. < init > (ServerManagerImpl.java:76)
  at oracle.soa.management.internal.facade.ServerManagerFactoryImpl.createServerManager (ServerManagerFactoryImpl.java:28)
  at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:85)
  ... 6 more
  
  
  On weblogic server I get rest of newspapers at the end after starting the server. Don't know if this is the problem:
  < Opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < Opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  lookupEngineLocalBean using JNDI {java: comp/env/ejb/local/bpmn/CubeEngineBean} for engine type {bpmn}
  lookupEngineLocalBean using JNDI {java: comp/env/ejb/local/bpel/CubeEngineBean} for engine type {bpel}
  line 06:12 not match expected character "of folklore <>" "" "
  SOA platform is running and is accepting applications
  line 03:12 not match expected character "of folklore <>" "" "
  
  
  I already tried to reinstall everthing from scratch... Any help is appreciated.
  
  Thanks in advance.
  
  Published by: 925432 on April 4, 2012 02:32

  Hello

  It seems that your JDev is probably configured to use a proxy server, as in the stack trace, you see a line "weblogic.socket.utils.ProxyUtils.getProxySocket".

  Please try to remove the proxy configuration in JDev.

  Go to tools-> Preferences-> Web browser and Proxy-> uncheck "Use a Proxy HTTP Server" if it exists.

  You may also need to restart JDeveloper.

  I hope this helps.

  -Cris

• Channel listen Email1.0 - configuration do not delete email from the server

  Hello
  
  When channel listen to B2B email bed, can it be configured (in B2B) to not not delete email from the server?
  
  Thank you
  Ganesh

  Hi Ganesh,
  listener email from B2B will mark as deleted read mail
  so no matter the imap/pop3. This is the behavior.

  as listener will only read if flag is not removed... just to avoid to read twice...

  Thank you
  Vijay

• Call of Duty 2 is not working correctly

  When I upgraded to Windows 8 he said that Call of Duty 2 is compatible. The game works, but I found these questions:

  • When it opens, I can only control the Windows and not the play slider. I have to go to the desktop and switch it back to the game to make it work;
  • I can't adjust the brightness in game;
  • The movement of the mouse is "lag" in the game and in the menu.

  This does not happen in the new versions of the series (CoD4, CoDWaW, MW2, etc...).
  For the game to open it in Windows Vista, Windows 7 and Windows 8 must be run in Windows XP SP3 compatibility mode. I also ran as administrator.
  I thought that it could be my ATi graphics card or drivers so I tried on a NVIDIA machine and it's the same thing. At the same time with the latest drivers.
  The game works fine on Windows 7 (XP SP3 compatibility mode), under the same pc configuration.

  The value 'No' for 'Pure' in multiplayer settings and run the game as administrator. I have windows 8 and everything works fine under parameters above, but it will take time to load the game.

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• Notes - camera mode and the draw

  Hello. I have 4 ipad air2 in my nursery for staff to use. We're just using notes, however, we see that 1 of platelets has the camera and function of the draw of the keyboard but the other 3 don't. I checked all 4 at software date wise, all other parameters such as icloud etc. are identical.

  For our work, the possibility of having the function of draw and the camera on the keyboard is very useful. The other 3 have only the text ("BOLD", police etc), on them where are the images of the camera and the tilde. No idea what we're doing wrong?

  First go to settings > general > keyboard > shortcuts > on. Then launch the application Notes. Under the topic files, make sure that you select iCloud so that you use iCloud Notes. Start typing a new one note you should see the shortcuts and camera and drawing to the right above the keyboard tool.

• Need help! ASA 5505 not PPTP passthrough to the Server internal

  Hello:

  Recently, I add a new Cisco ASA 5505 like Firewall of the company network. I found that the PPTP authentication has not obtained through internal Microsoft Server. Any help and answer are appriciated.

  Please see my setup as below. Thank you!

  ASA Version 8.4 (3)
  !
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  switchport access vlan 2
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 172.29.8.254 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 177.164.222.140 255.255.255.248
  !
  passive FTP mode
  clock timezone GMT 0
  DNS server-group DefaultDNS
  domain ABCtech.com
  permit same-security-traffic inter-interface
  network obj_any object
  172.29.8.0 subnet 255.255.255.0
  service object RDP
  source eq 3389 tcp service
  Orange network object
  Home 172.29.8.151
  network of the WAN_173_164_222_138 object
  Home 177.164.222.138
  SMTP service object
  tcp source eq smtp service
  service object PPTP
  tcp source eq pptp service
  service of the JT_WWW object
  tcp source eq www service
  service of the JT_HTTPS object
  tcp source eq https service
  network obj_lex object
  172.29.88.0 subnet 255.255.255.0
  network of offices of Lexington Description
  network obj_HQ object
  172.29.8.0 subnet 255.255.255.0
  guava network object
  Home 172.29.8.3
  service object L2TP
  Service udp source 1701 eq
  Standard access list VPN_Tunnel_User allow 172.29.8.0 255.255.255.0
  Standard access list VPN_Tunnel_User allow 172.29.88.0 255.255.255.0
  inside_access_in list extended access permit icmp any one
  inside_access_in tcp extended access list deny any any eq 135
  inside_access_in tcp extended access list refuse any eq 135 everything
  inside_access_in list extended access deny udp any what eq 135 everything
  inside_access_in list extended access deny udp any any eq 135
  inside_access_in tcp extended access list deny any any eq 1591
  inside_access_in tcp extended access list refuse any eq 1591 everything
  inside_access_in list extended access deny udp any eq which 1591 everything
  inside_access_in list extended access deny udp any any eq 1591
  inside_access_in tcp extended access list deny any any eq 1214
  inside_access_in tcp extended access list refuse any eq 1214 all
  inside_access_in list extended access deny udp any any eq 1214
  inside_access_in list extended access deny udp any what eq 1214 all
  inside_access_in of access allowed any ip an extended list
  inside_access_in list extended access permit tcp any any eq www
  inside_access_in list extended access permit tcp any eq www everything
  outside_access_in list extended access permit icmp any one
  outside_access_in list extended access permit tcp any host 177.164.222.138 eq 3389
  outside_access_in list extended access permit tcp any host 177.164.222.138 eq smtp
  outside_access_in list extended access permit tcp any host 177.164.222.138 eq pptp
  outside_access_in list extended access permit tcp any host 177.164.222.138 eq www
  outside_access_in list extended access permit tcp any host 177.164.222.138 eq https
  outside_access_in list extended access allowed grateful if any host 177.164.222.138
  outside_access_in list extended access permit udp any host 177.164.222.138 eq 1701
  outside_access_in of access allowed any ip an extended list
  inside_access_out list extended access permit icmp any one
  inside_access_out of access allowed any ip an extended list
  access extensive list ip 172.29.8.0 outside_cryptomap allow 255.255.255.0 172.29.88.0 255.255.255.0
  inside_in list extended access permit icmp any one
  inside_in of access allowed any ip an extended list
  inside_in list extended access udp allowed any any eq isakmp
  inside_in list extended access udp allowed any isakmp eq everything
  inside_in list extended access udp allowed a whole
  inside_in list extended access permitted tcp a whole
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  local pool ABC_HQVPN_DHCP 172.29.8.210 - 172.29.8.230 255.255.255.0 IP mask
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT static orange interface (inside, outside) source RDP RDP service
  NAT (inside, outside) source obj_HQ destination obj_HQ static static obj_lex obj_
  Lex-route search
  NAT guava Shared source (internal, external) WAN_173_164_222_138 service JT_WWW JT_WWW
  NAT guava Shared source (internal, external) WAN_173_164_222_138 service JT_HTTPS JT_HTTPS
  NAT guava Shared source (internal, external) WAN_173_164_222_138 service RDP RDP
  NAT guava Shared source (internal, external) WAN_173_164_222_138 SMTP SMTP service
  NAT guava Shared source (internal, external) WAN_173_164_222_138 PPTP PPTP service
  NAT guava Shared source (internal, external) WAN_173_164_222_138 service L2TP L2TP
  !
  network obj_any object
  NAT dynamic interface (indoor, outdoor)
  inside_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
  Route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server protocol nt guava
  AAA-server host 172.29.8.3 guava (inside)
  Timeout 15
  guava auth - NT domain controller
  identity of the user by default-domain LOCAL
  Enable http server
  http 172.29.8.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac Remote_VPN_Set ikev1
  Crypto ipsec transform-set esp-3des esp-md5-hmac Remote_vpn_set ikev1
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto-map Dynamics 20 ikev1 transform-set Remote_VPN_Set set outside_dyn_map
  Crypto-map dynamic outside_dyn_map 20 the value reverse-road
  card crypto outside_map 1 match address outside_cryptomap
  peer set card crypto outside_map 1 173.190.123.138
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
  ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA'RE
  P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet 172.29.8.0 255.255.255.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0

  dhcpd auto_config off vpnclient-wins-override
  !
  dhcprelay Server 172.29.8.3 on the inside
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  allow outside
  internal ABCtech_VPN group strategy
  attributes of Group Policy ABCtech_VPN
  value of server DNS 172.29.8.3
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list VPN_Tunnel_User
  value by default-field ABCtech.local
  internal GroupPolicy_10.8.8.1 group strategy
  attributes of Group Policy GroupPolicy_10.8.8.1
  VPN-tunnel-Protocol ikev1, ikev2
  name of user who encrypted password eicyrfJBrqOaxQvS
  tunnel-group 10.8.8.1 type ipsec-l2l
  tunnel-group 10.8.8.1 General-attributes
  Group - default policy - GroupPolicy_10.8.8.1
  IPSec-attributes tunnel-group 10.8.8.1
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  remotely IKEv2 authentication certificate
  pre-shared-key authentication local IKEv2 *.
  tunnel-group ABCtech type remote access
  attributes global-tunnel-group ABCtech
  address ABC_HQVPN_DHCP pool
  authentication-server-group guava
  Group Policy - by default-ABCtech_VPN
  IPSec-attributes tunnel-group ABCtech
  IKEv1 pre-shared-key *.
  tunnel-group 173.190.123.138 type ipsec-l2l
  tunnel-group 173.190.123.138 General-attributes
  Group - default policy - GroupPolicy_10.8.8.1
  IPSec-attributes tunnel-group 173.190.123.138
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  remotely IKEv2 authentication certificate
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class inspection_default
  inspect the pptp
  inspect the ftp
  inspect the netbios
  !
  172.29.8.3 SMTP server
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:6a26676668b742900360f924b4bc80de
  : end

  Hello Wayne,

  The first thing I noticed

  In the ACL you are pointing to the broad public while it should be to the private sector (YOU HAVE A PERMIT IP ANY ANY to the end, so it's not bad. FYI, if you decide to take this one any allowed ip address then you should point to private servers ip addresses)

  Now, the policy where the PPTP inspection, etc., will be used is not applied to any service-policy so add:

  global service-policy global_policy

  Don't forget not just for a PPTP connection to get established we should see 2 things:

  -Trading is done on the TCP 1723 port and then traded on Appreciate data packets.

  Follow my blog for more information on this topic:

  http://laguiadelnetworking.com/2012/12/22/what-is-new-on-the-PPTP-inspection-on-the-ASA/

  Try and let me know

  Julio

• I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

  I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

  #1, try the FTP mode passive switching power in the definition of your remote server site.

  

  #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

  Nancy O.

• How to download only files .html to the server

  How to select all the .html files in my local folder for uploading to the server. Now when I do a little frequent change that effects each .html page (I have use models) I all select them one at a time so as to not accidentally download large files not .html as movies. Thought it might be a way to tell Dreamweaver to download only the .html files.

  Instead of manually select the files that have changed, have you tried to use editing > select options in the files Panel?

  for example edit > Select recently modified or Edit > select new premises.

  Who will only select the files that you have changed (if .html so only those who will be selected), then click you Put.

• Flash Player is not to connect to the server policy file - still gives SecurityError #2048

  Hello

  I'm having a weird problem.

  Here's the situation:

  * I have a server that is running at http://192.168.0.179 . It serves as a file in flash, WebSocketMain.swf (of https://github.com/gimite/web-socket-js), who tries to make a socket connection to 192.168.0.179:5000.

  * I have a socket policy file server clocked at http://192.168.0.179:843 .

  * It works fine on the machine the server is running on (on OS X). Flash connects to the server policy files and on the server on port 5000.

  * However, on a Windows (64-bit) machine on the same network (192.168.0.175), running Flash 10.3/11.2/11.3 (and in the two Chrome/IE9), I get the following in the JS console error:

  LOG: Active [Websockets] Debug

  LOG: File [Websockets] strategy: xmlsocket://192.168.0.179:843

  [Websockets] Unable to connect to the Server Web Socket ws://192.168.0.179:5000/websockettest (SecurityError: Error #2048: security sandbox violation: failed to load http://192.168.0.179/assets/flash/WebSocketMain.swf )

  data from 192.168.0.179:5000.) Make sure the server is running and the policy file for the Flash shoe is placed correctly

  LOG: [Websockets] closed

  * I tried to modify WebSocketMain.swf to call Security.loadPolicyFile explicitly and not, but in both cases Flash Player will not even connect to the policy to 192.168.0.179 server. So it does not even attempt to read the policy file, yet still get the SecurityError.

  * 192.168.0.179:843 is opened from the machine.175. I can connect via a client Terminal Server (e.g. PuTTY) and receive the policy without problem file. However, FP simply does not want to connect.

  * I tried Security.allowDomain("*") and everything. Still nothing.

  * I tried to change the URL to which public Service will connect to (which is served by the web server) to 192.168.0.179:80. Nothing. 192.168.0.179:10000 does not work either. Even 127.0.0.1 and localhost does not work.

  I have more suggestions. This could be the cause? Why won't even try FP to connect to the policy server?

  Found the problem: mms.cfg had an entry saying DisableSockets = 1, which caused the security error.

• Help Web site is not displayed right on the server, but seems very well on my files the.

  After that I downloaded my site on my server pages lost their format, the only page that seems correct is my index page.

  That's how it should look like.  (local file)

  This is what it looks like on the (server)

  Help, please

  The point of Nancy does very well, is that from the server, the web page cannot find a file whose path begins by file:///C|/Users/tdavis/Documents/... because your C drive do not EXIST on THE SERVER.

  You MUST correct these references in your code so that they actually point to the file in a relevant folder root path.

  When you have not defined a site again, (as requested) DW will use an 'absolute' path to the file that includes the drive and the folder names in the path. Once the site is defined these must change to show only the location of the root folder, but this does not always happen. If you don't check and change these stray file path references before you put the files on the server, the Web page will not be able to reference what he should look and work properly.