Call phones default location

I've recently upgraded to the latest version (which was actually a problem in the previous version) whenever I use the "phone calls" and tried to enter a number that I have to use "+ 1"before each number." Otherwise, he's trying to pull up a different country. How can I get the default value for the USA?

Also another problem I'm having is one never type in the text, I use NaturallySpeaking since I disabled, after I get the typed message using the 'Next line' command, which sends the Enter key which sends it to the next line. But now, every time that I really have top message say "Press Enter." It allows to work with the previous command, but something has changed.

Howard

When you (for example) press the call icon, in the callbox that appears on the top left there is a dropdownbox country, this changes the country you want to be default.

The comand to jump a line in Skype is shift + enter (aka the next line) will enter your message, and I guess that's your problem, I can not answer for why this has changed, but you could work around him create an order custom that shift + enter (no idea if this is possible, however).

Or you can revedrt to the previous version:

http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

Don't forget to go to tools > options > adanced > automatic updates and turn off if you do not want to run the latest version.

The above description is for Skype in compact/shared mode, the default value may be slightly different.

Tags: Skype

Similar Questions

  • Where are offline files stored (to be synchronized)? Can we change the default location?

    Dear
    I use Vista Ultimate.
    Where are offline files stored (to be synchronized)? Can we change the default location?
    concerning
    Maurin

    Hi Maxim P,.

    Sync Center is the place to go to synchronize your computer with network folders, mobile devices and compatible programs. Sync Center can keep automatically your files and folders synchronized in different places.

    Open Sync Center by clicking the Start button, tap all programs, accessories, and then clicking on of Sync Center.

    Sync Center is a feature of Windows that allows you to keep information synchronized between your computer and files stored in folders on network servers. They are called offline files because you can access them even when your computer or the server is not connected to the network.

    You can see the link below for more information about changing the location of the CSC files.

    How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista

    http://support.Microsoft.com/kb/937475

    For more information, see work with network files when you are offline.

    See the links below for more information on synchronization.

    Sync Center: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

    How to maintain your information is synchronized

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-to-keep-your-information-in-sync

    Sync Center: recommended links

    http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-recommended-links

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • Change the default location of the Connections folder

    When I do a MySQL connection in Dreamweaver it automatically performs a folder called connections on the top of my site. I wish I had the Connections folder to my includes folder. Is it possible to change the default location of the Connections folder?

    Unfortunately, this file cannot be moved.

    Randy

  • ITunes media folder location has changed, but it keeps resetting to the default location

    Hello

    I changed my iTunes media folder location. My internal drive has two drives (was originally a Fusion player, after a system crash, I had to clean it and install Mac OS from scratch and is no longer read as a reader of fusion, but I agree with it), so one of the discs that I use for the OS itself and the other to store the data. I've changed most of my files application for the storage disk storage. When I change the location of folder of media to iTunes, after reboot, it restores the original file to ~/Music/iTunes/iTunes Media.

    Why does that happen?

    If this info can help, I do not have the bluetooth icon in the menu bar, so I removed it by opening bluetooth preferences and unchecked 'see the bluetooth in the menu bar. He disappears. When I restart, it seems once again, it is not happened to Yosemite.

    Thanks in advance.

    iTunes will revert to the default locations, if the configured drive is not present when iTunes opens. This happens if the drive is not mounted or asleep...

  • the default location of the window popup

    I use a planning site that opens a new window every time I have change or make a reservation. The pop up has always opened in the center of my screen. Last night, it now opens at the bottom of my screen, so I have to drag up to see anything. How can I change the default location where I want? Close the browser has not changed anything about it, restarted my computer has not changed.

    Thanks for the reply, but it turns out that my problem was caused by a much simpler problem.
    The size of the window when not maximized not had been changed and moved to the bottom of the screen. Once I deselected maximize and then corrected the smallest window size and position, the pop-ups are returned to the opening where they shouldn't.

  • I want that thunderbird to run in the background when I call the default mail client

    I have a software which sends emails for reports. The software calls the default mail client (Thunderbird) and sends the e-mail. However, this open Thunderbird and gets in the way. Is there anyway this could send the email without opening Thunderbird? Can it run in the background like outlook express? It should be closed after the e-mail was sent.

    http://KB.mozillazine.org/Thunderbird_3.0_-_New_Features_and_Changes#Send_in_Background

    Open Tools(or AppMenu/Options)/Options/Advanced/general/Config. Editor, paste mailnews.sendInBackground into the search box, and then double-click the preference to set it to true.

  • Data update of Windows default locations have changed. How can I fix it?

    I followed these instructions to rename the Windows Software Distribution folder and my updates started again.  Ran the Microsoft Fix - it tool after that, now it gives me this message by default Windows Update site data have changed.  Please get back to me as best as possible.

    Hello

    Follow the steps in th from this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/change-default-location-of-Windows-updates/ca4f318c-712b-4344-9584-cf7d33d9e689

  • "Windows update default location of data has changed". " Microsoft Fix - it message. No solution is apparent.

    "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

    PS. What is the default location anyway?

    "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

    PS. What is the default location anyway?

    It is a peer-to-peer forum.  You don't talk to Microsoft.

    A quick search indicates you have probably allowed the system to become infested/infected.

    Here's what I propose - from top to down, don't skip any even if you do 30 minutes as part of an obsession, part of all that you already have.  ;-)

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Cleaning the components of update on your Windows XP computer

    Given your current number, it's a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
    How to reset the Windows Update components?

    Reset.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • How to MOVE the default location of Windows Fax and Scan?

    We have recently added a second server (Windows Server 2008) to a domain AD., because the new server has more resources, we moved all the DOCUMENTS folder to users from the server (Server 2003) network share to address liked to a share on the new Server 2008 machine. After the move, all Windows 7 machines runs the utility of fax and scan can not find MANY DOCUMENTS folder as the utility constantly points to the old server (which took the OLD action of document already deleted).

    I changed the location of DOCUMENTS in Windows 7 for Server 2008 sharing, but Fax and Scan keeps searching for the old stock 2003 server and I cannot find where to redirect them. Can I turn off Windows fax and analysis services to the title of printing and scanning and then restore? That will allow me to redirect to the correct folder? I have tried even to search the registry for references to the old stock but still can't seem to locate the old server to the MANY DOCUMENTS reference.

    Can anyone help?

    Russ Foszcz

    I solved this problem with a synlink

    First to find the actual location of Library/Documents/scanned documents, make this scanned Documents to right click and click 'open file location '.

    In my case he opened it (that I copied from the address bar):

    Documents C:\Users\Tim\Documents\Scanned

    What should I do now is to save the files in this folder, and then delete the "Documents" folder completely

    Then click the windows key and type in run or search (or click the Windows key + R) and type 'cmd' and press enter

    A black console should appear

    In it, you must enter this command, I wanted that my scans to record in X:\Scans

    MKLINK /j "C:\Users\Tim\Documents\Scanned Documents" X:\Scans

    then press enter

    This creates a folder (symlink, not a shortcut), who acts as a normal file, but is actually located in a different place, so when the scan software saves files in its default location will be actually stored in X:\Scans

  • call phone call FETCH?

    Hi all

    How can I reterive phone call phone number? When we press sendKey calls show [missed calls, calls received and placed calls]...

    My requirement is: How can I get stressed the appeal of phone calls?

    Thank you

    Savi

    PhoneCallLog phoneCallLog = (PhoneCallLog) context;
    PhoneCallLogID phoneCallLogID = phoneCallLog.getParticipant ();
    Number of strings = phoneCallLogID.getNumber ();

  • BlackBerry Smartphones mini sd default location for text messages

    Is there a way to make the mini sd the default location for the texts?

    I have AT & T and about twice a day, I get a message from the system:

    "SIM CARD FULL, please delete SMS"

    Hi and welcome to the forums!

    Here are the steps to deselect the SIM card and save SMS messages on your device.

    Please note that you cannot save on press card.

    Thank you

    Bifocals

    KB13465

    SIM card is full please delete SMS messages

  • Default location for My Documents - Error Message

    I followed a tutorial online on changing the default location of the My Documents folder.

    I have moved from C to E, where I had more room.

    Now, I want to go again - but when I go into properties, restore the default values and apply it finally said he can't move a particular file, its file name is too long. So I closed the screen IE cancelled out of them. Found the directory that contains the files and delete it.

    Restarted the PC and when I try and move the default my documents location it still doesn't move and it gives me the same error message.

    How can I work around this problem and move the my docs back to the c drive?

    Thanks, Sam

    1. I have created a folder on your desktop (any name will do, is not serious).  Drag all your documents to the E: drive in this folder.
    2. So now that documents of drive E: is totally empty, go ahead and move the location using the properties box, as if you were in front.
    3. Then after that the move is done, drag all the files from the Office folder in the actual location and delete the folder you made in step 1.
  • Default location for pictures of the store iprocurement

    Hello

    We are implementing iprocurement.

    What is the default location for image bank iprocurement.

    In our case the POR profile option: hosted Images directory is empty.

    If it is empty, which is the default location.

    Is it a good idea to map profile POR option: directory of Images hosted at /OA_MEDIA/

    Kind regards

    Anita

    /OA_MEDIA/ is a virtual directory and points $OA_MEDIA path on the server.

    If you have access to Oracle Application Server, and then follow these steps. Or ask your DBA application the following steps and give you the path of directory.

    1. open a new terminal session > log in as 'applmgr.

    2. install the application environment by running the file ".env' application.

    3. simply type echo $OA_MEDIA. The returned path is the path of the virtual directory of/OA_MEDIA /.

    If you are about R12.2 or higher then the output will be something like this - / u01/oracle/SCREWS/fs1/EBSapps/comn/java/classes/oracle/apps/media. When the SCREW is the context and the fs1 is the base application directory direct environment.

    Concerning

    Kamal Khan

    www.AclNZ.com

  • What is the default location for the cache?

    I made the mistake to change my default location for the cache for Adobe Bridge and now I want to change it back... but I can not find the folder or know the path.

    Hi lorenkahle

    • Navigate to C:\Users\"Your user name' \AppData\Roaming\Adobe\Bridge CC\Cache (Windows)

    / User/Library/Caches/Adobe Bridge CC/Cache / (MAC)

    Bridge Cache in the Cache folder.

    You can set it to this place

    • If this does not help, you can reset bridge default preferences that will change the location of the cache.

    For so press and hold the CTRL, ALT, Shift (Windows) / Cmd + Option + Shift (MAC) during the start-up of bridge and make check reset preferences, and then click Ok

    Concerning

    Assani


  • change default location for new virtual machines programmatically

    I know that you can change the default location for new virtual machines through the preferences GUI, but I want to be able to change it for all those who use VMWare Workstation in my company, so that it is more advanced to the personal folder of the user.

    Where exactly is stored?  I don't see in the registry.

    Thank you!

    WS does not use the registry to store settings.

    Set the path in UNK for each user:
    prefvmx.defaultVMPath = "F:\. »

Maybe you are looking for

  • Dual graphics card port to use 2 monitors on my HP a6614f

    We have a new HP a6614f and run the 2 monitors. It will be used for text and business, applications do not play. Does anyone have a recommendation on what type of graphics card works with this system? The computer has 2 open PCI Express x 16 slots an

  • Portege R100 - I can reinstall Windows XP Home edition with USB floppy & USB key?

    I recently damaged my R100 thanks to a virus attack. Despite late cleaning things up with Norton, it will now very slowly and I think that the only way forward is through a total reinstall XP. I have the original recovery CD and a USB floppy drive bu

  • Satellite A100 PSAA8E - no sound on Windows XP

    My Toshiba A100 (PSAA8E) initially provided with Windows XPI it have been upgraded to Vista with the option express upgrade. Some of my basic software were not supported so I reinstalled Windows XP Professional with Service Pack 2.After a lot of rese

  • Installation router E2000 works not

    I want to install router E2000 on a laptop with Vista and a wireless adapter Topdog Marvel... automatic installation said that he does not succeed... any ideas of what I can do to make this work?

  • HP cq5302F

    Hi, I have two downloads that don't is not loading, it gives a code 800 b 0100, wonder how I can solve this? Thank you... Jim