Call reports problem Forms 12 c 12

Similar Questions

• Calling the reports of forms in the same session.

  Hello everyone:
  
  I have a small question calling reports 6i Forms 6i form:
  
  When I call a report from Oracle Forms 6i with the RUN_PRODUCT command, the report asked running on another session as the appellant formula.
  
  
  I need call a report but in the same session of calling forms.
  
  is there a way to fix this?
  
  Best regards
  Pedro

  I need call a report but in the same session of calling forms.

  It is not possible. You can use the same user to call the report, but not in the same session. Forms and reports are two different products, so both have their own session. If you just did something in a form and want to make a report that reflects the changes you made, you need to commit these changes in forms first.

• call report form 12 c 12

  call report 12 c of form 12 c by RUN_REPORT_OBJECT (the output format is pdf), but get error REP-56133 - an attempt to write to the folder failed due to a lack of permissions , can someone give me some advice. Thank you!

  the solution is:

  1. add more to rwserver.conf

  c:\Temp

  2 mkdir c:\temp in the report server

  3 change the ownership of the object of the report form with the name of Destination report to c:\temp\xxx.pdf

• call report forms (with or without parameters) oracle apex

  Hello

  I want to know if I can call report forms (with or without parameters) oracle apex?

  Thanks in advance

  Try to look at this blog: Roels Blog: integration of forms and the APEX: APEX calling forms

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• Modal calling report that calls another Page to the APEX 5

  I have an interesting question here for the community...

  Using APEX, theme 42 5.  I have a report with a button that will call a modal form.  on the form modal is a LOV which will set a value to the calling page.  If the value returned to the calling page, I then need to redirect to another page in the application by assigning a page element on the new page with the value that I have just received from the modal page.

  I have everything up to the second rec = direct working in a test environment and I have problems with redirection...

  All those who want to watch here is the information:

  URL: https://glassfish1.revion.com/apex/f?p=4550:1:23425296545047:

  workspace: homeworld

  user name: demo

  password: demo

  application name: emp demo test (143)

  I have built dynamic actions to get the value of the page where I need but when try to redirect to the page and set the page item, that I don't get the redirection to work...

  Thank you

  Tony Miller
  Los Alamos, NM

  Hi Tony,.

  I'm just curious... If it worked for you?

  Thank you

  Pavel

• Vista - system queued windows error reporting problem

  My Vista disk cleanup utility reports that I can save 258GB by removing "system queued windows error reporting." Well well... my HD is only 145GB so somethiing is bad.

  I read a url that has a fix: http://www.oamate.com/is-it-safe-to-delete-system-queued-windows-error-reporting.html

  Is this a correct solution? Looks like it's a bug of Microsoft for you, but I can't find anything about this on the Microsoft.com site. In this forum, there is a thread that says it's OK to dele it, but I don't want to lose all my data!

  Thank you

  Its ok to delete the data in queue for the error report windows.

  In the event of a hardware or software problem on your computer, Windows collects information that describes the problem, called a problem report. Report details can include, for example, the name of a program that has stopped working, the date and time that a problem occurred, or the version of the program, which has encountered the problem.

  Sending a problem report allows Windows to notify you if a solution is available. If a solution is not available, you can ask to provide additional details about the problem in order to create a. Additional details can include files or parts of files that help to identify the problem and explain how it has affected your computer. Windows does not intentionally collect personal information, and you can view additional details in a problem report before sending it to Microsoft.

  If you want to disable this feature, follow the steps mentioned in the link below

  http://www.howtogeek.com/HOWTO/7863/disable-error-reporting-in-XP-Vista-and-Windows-7/

  hope this helps

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• How to call report via the URL (without displaying information to user name)?

  I want to call report in my APEX application.
  
  I can get it run like this:
  

  http://hostname:port/reports/rwservlet?module=invoice.rdf&userid=oe/oe@tnsalias&destype=cache&desformat=pdf 

  But showing username in the url would have serious security problem.
  
  How could configure the report to set the default user ID, so that I do not need to define who, in the url?
  
  And is it possible to integrate this with my APEX application authorization?

  frank1018 wrote:
  I want to call report in my APEX application.

  I can get it run like this:

  http://hostname:port/reports/rwservlet?module=invoice.rdf&userid=oe/oe@tnsalias&destype=cache&desformat=pdf 
  

  But showing username in the url would have serious security problem.

  How could configure the report to set the default user ID, so that I do not need to define who, in the url?

  And is it possible to integrate this with my APEX application authorization?

  Hi frank
  Check this http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_run013.htm

  Hope this helps

• Running reports of Forms 6I

  Hello everyone
  
  I'm trying to run the forms 6i report using the 11 G database by code on when_button_pressed relaxation of the recovery button. I am using following code
  
  
  DECLARE
  Repid REPORT_OBJECT;
  v_rep VARCHAR2 (100);
  rep_status varchar2 (20);
  v_plist_id paramlist;
  pl_name varchar2 (50): = "rep_params";
  
  Start
  v_plist_id: = get_parameter_list (pl_name);
  check_param_list (pl_name); Check the availability of paramlist and
  
  
  -When the list of parameters already exists it must first be distroyed
  If not id_null (v_plist_id) then
  destroy_parameter_list (v_plist_id);
  end if;
  
  v_plist_id: = create_parameter_list (pl_name);
  
  add_parameter (v_plist_id, 'P_1', text_parameter,: block1.id);
  -input parameter
  add_parameter (v_plist_id, 'paramform', text_parameter, 'NO');
  -remove the p-form reports view
  
  -call reports
  run_product (collection, 'c:\report4.rdf', synchronous, DURATION,
  file system, v_plist_id, null);
  end;
  
  During report rujns, it shows only the header of the report. When I omit the line 'Paramform' displays paramform asking parameter reference: block1.id. After giving the value for the id, it displays the report with the heading & data. But when I place the paramform line, is not a form of parameter poster but value for the id field does not have a form of parameter.
  
  Where I'm wrong.
  
  Thank you
  
  Sanna
  
  Published by: Sajjad on December 29, 2011 03:21

  add_parameter (v_plist_id, 'P_1', text_parameter,: block1.id);

  Are you sure that the parameter in your report is called P_1?
  Are you sure: block1.id has the correct value?

• That one is the best way create a parameter to use to call report

  Designer/forms have the ability to create a form with no linked items (columns of data inot according to) with lov to reports...
  
  How can I do this with adf bc, jdeveloper.
  
  Thank you

  If you don't need the database interaction you do not have to use the ADF BC for your reports calling.
  It would be simpler just to write a simple Java class that has a method that accepts parameters and call reports - then you can expose it as a data control and link to your JSF pages.
  Here is a basic example of how to work with a simple class in service data control:
  http://blogs.Oracle.com/Shay/2009/07/java_class_data_control_and_ad.html

• 500 internal Server Error while calling reports 10g

  I use independent forms and report services. I get 500 Internal Server Error intermittently while call reports 10g.

  500 internal error is a generic error and it could be due to several reasons such as a bad configuration or the scarcity of resources.

• Web form call Client-Server form

  Hello. I always have an existing form of Client-Server (6i) in production which should call a Web form and pass it a parameter. Obviously I can't use new form or call the client-server version, but can - I somehow make a command-line (including a parameter) that opens the Web form? Any suggestions to fix this problem?
  
  
  I can create a command-line like this, but have no idea of how to pass a parameter to my Web form. The participating named Web form that has a parameter set name 'p_participant '.
  
  * "" C:\Program may Explorer\iexplore.exe ' http://9.35.32.206:7777/forms/frmservlet? " form participating =
  
  I can also create a command line to open a web form like this for:
  
  * "" C:\Program may Explorer\iexplore.exe "http://9.35.32.205:7777/forms/html/sas2.htm*"
  
  Where the sas2.htm looks like this:
  
  * < html > *.
  * < body onload = "document.menulaunch.submit (); ' > *.
  Start the generation of the file...
  
  If the application does not load within 30 seconds, then click on the button below:
  
  * < form action = http://9.35.32.205:7777/forms/frmservlet menulaunch = name? config = FileGeneration method = post > *.
  * < script > *.
  var wshshell = new ActiveXObject ("wscript.shell");
  var username is wshshell. ExpandEnvironmentStrings ("%orauser%");
  var pw is wshshell. ExpandEnvironmentStrings ("%orapass%");
  document.write("<input type=hidden name=userid value="+username+"/"+pw+"@sparc20*>") *.
  * < /script > *.
  * < input type = value = launch > *.
  * < / form > *.
  * < / body > *.
  * < / html > *.
  
  
  Any help would be greatly appreciated.
  
  Published by: Buechler on April 8, 2009 08:58

  Simply add your URL as follows:

  http://9.35.32.206:7777/forms/frmservlet?form=participants&otherparams=p_participant=
  

  I guess that you plan to use the HOST to make that call. I would recommend something like this:

  HOST ('cmd /c start iexplore.exe "http://9.35.32.206:7777/forms/frmservlet?form=participants&otherparams=p_participant="');
  

• Please report problems than 10.0 to Apple

  Use this address to report problems to Apple. Please use it if the issues are not resolved through community support site. Apple developers need to know about bugs, so they can fix it in the updates.

  http://www.Apple.com/feedback/

  Strange you didn't solve any problems of iOS 10.0.1. You have encountered a problem? It could be that he is not really a bug, in the true sense of the word.

• Port_ #0003.Hub_ #0005, Windows has stopped this device because it has reported problems. (Code 43)

  my computer did not recognize my usb to the printer device.

  Hello

  1. what operating system is installed on the computer?

  2. this printer was working on the computer before?

  3. have you made changes on the computer recently?

  4. What is the brand and model of the computer?

  5. What is the brand and model of the printer?

  Try the following steps.

  Method 1.

  Connect the printer on another computer and check if the printer works fine.

  Plug another usb printer and check if the printer works fine on this computer.

  Open the hardware and devices Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2.

  I also suggest you follow the steps in this article.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Refer.

  Code 43: Windows has stopped this device because it has reported problems: http://TechNet.Microsoft.com/en-us/library/cc725873%28V=WS.10%29.aspx

  I hope this helps.

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.