Call the recovery of CDR and RMC Records Manager

Hello

I have my tent monitor QOS in a CallManager configuration and so I need access to records CDR/CMR. I read a lot of references to this subject and currently quite confused about which way to go. I know that CDR/CMR obtained records be retrieved a little ways, but it seems to me hit a roadblock in each. So if anyone can advice me which would be the most appropriate, it would be great. I have them listed below.

(1) access options-mib on the voice gateway CISCO-VOICE-SELECTOR - giving quality of Service for calls active and historical values. But the problem here is if a Cisco Catalyst switch is used as a gateway, this MIB is not supported on it. It relies on many of the other Cisco routers.

(2) access to the Microsoft SQL db and query the tables of CDR and CMR. But I guess that this option has been deprecated in Call Manager version > 7 or more

3) CDR/CMR files through SOAP request. Is the format of the request for the COR and the same RMC? I found one example in the XML Developer's guide. But the application doesn't have a parameter that can distinguish between a request for the COR or CMR.


               http://schemas.xmlsoap.org/SOAP/envelope/"container ="http://www.w3.org/2001/XMLSchema"" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > ""
              
               http://schemas.xmlsoap.org/SOAP/encoding/"xmlns:ns1 ="http://schemas.cisco.com/ast/soap/">."
               200511161000
               200511161059
              
              

               "http://schemas.xmlsoap.org/SOAP/Encoding/" xsi: type = "xsd: Boolean" xmlns:soapenc = "http://schemas.xmlsoap.org/soap/encoding/" > true.
              

              

How can I access the CMR records using this approach. This approach is valid ofr versions of the call manager and the GUY?

(4) CDR and CMR can be sent as a syslog message using the CISCO-SYSLOG-MIB. Can you please tell me if there is a specific configuration to do for that? Is this valid for all versions of the call manager and the GUY?

If I missed a few approach let me know.

Receive your answer.

Concerning

Roycey

Roycey,

How are you.  There are many options to be sure.  Let's try to cut through this some:

roycey_cheeran wrote:

1) Access CISCO-VOICE-DIAL-CONTROL mib on the Voice gateways - This gives the QOS values for the active and historical calls. But the problem here is if a Cisco Catalyst switch is used as a gateway, then this MIB is not supported on it. It is supported on most of the other Cisco routers.

I wouldn't go this route if you are talking about a Cisco UCM deployment.  Yes, you will find information on gateways, but that is not really necessary, and as you have discovered, depending on the platform.

roycey_cheeran wrote:

2) Access the Microsoft SQL db and query the CDR and CMR tables. But I guess this option has been deprecated in  Call Manager version > 7 or so

Fix.  In pre-5 x days CDRs were flat files collected by subscribers and send to the Publisher (for a part of MS).  A service at the Publisher (CDRInsert) take these flat files and push them into a database.  It's a MS SQL DB.  Here, the data could be maintained by other applications and processes.  In the version of the device, the CDRs are always grouped at the Publisher, but are kept in the form of flat files.  If you have activated the CDR Analysis and Reporting (ERA) on the CUCM system, flat files will be available in a database format and you can really ask of the CLI on the server.  More information on the CAR in a little.

roycey_cheeran wrote:

3) Access the CDR/CMR files through SOAP request. Is the request format for the CDR  and CMR the same? I found an eg in the XML developer guide. But the request has not parameter that can distinguish between a request for the CDR or CMR.

How do I access the CMR records using this approach. Is this approach valid ofr versions of the Call Manager and the CME?

It does not work quite the way you think. The CDR interface on SOAP request that you speak is simply a command you can send to the CUCM system to find out what the CDRs are sitting in the repository.  You can then use the interface to retrieve the CDRs.  The intended use for the COR on demand API is to allow a server to "pick up" billing all CDRs he missed due to a disruption in the communication of the CUCM system.  Concerning the differentiation between the COR and CMR.  I have not watched this API recently, but I recall it's your application/script will need to determine what type of call recording is available through the name of the flat file (cmr vs cdr).  But I could be wrong.

roycey_cheeran wrote:

4) CDR and CMR can be sent as syslog message using the CISCO-SYSLOG-MIB. Can you please tell me if there is some specific configuration to be done for this? Is this valid for all versions of Call Manager and the CME?

I didn't know that's true for CUCM.

For CUCM, I would look to set up a server billing detailed call (CUCM maintenance of web pages).  Billing is fundamentally a FTP/SFTP server which the CUCM cluster will flow the CDRs based on a specified interval.  You just need a FTP/SFTP server IP address (I recommend SFTP) and a user name.  The default interval is 1 minute (defined in the parameters of the business).  You can change the interval.  This will give you the raw data that you can treat to your heart's content.  For CME, the data structure is different and you will need to send details of calls via syslog, I think.  You need normalize recordings if you want to compare/contrast.  I haven't looked this aspect of the CME myself.

I have already mentioned CAR.  It is a Cisco delivered with CUCM application for free. You just allow it.  As a free application, it is not really the most useful.  But it can sometimes meet the exact demand that you are looking to fill. Browse ORC "CDR analysis and Reporting tool.

HTH.

Kind regards

Bill

Remember messages useful rate.

Tags: Cisco Support

Similar Questions

  • Satellite L500D - can only burn the recovery of 1st and 2nd disc

    I bought this 2nd hand computer laptop in the last two days with the factory default reset. However, I could only burn the 1st recovery disc 2 of 4 using Toshiba Recovery Disc Creator.

    I am running Vista Home Premium SP2 32-bit. I started at F8 factory reset "out of the box" settings that went well. I did where there was a small problem when the previous owner restored to factory settings.

    As he had SP1, I installed SP2. I upgraded the BIOS to 1.1 to 1.4, the latest. I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

    Downloads from http://www.mytoshiba.com.au/support/notebooks/satellite/l500/pslk0a-00r009/download.

    I changed to another brand of DVD blank. I have checked and unchecked "Verify" in the Recovery Disc Creator. I also have the latest installed version of the Toshiba disc Creator software. I tried to burn discs 3 & 4 separately overall

    I get no error message, just as the taskbar progress 3rd disc ends never quite at the end. The former owner has never created a set of the factory restore disks. Any thoughts would be appreciated.

    Hello

    to be honest, I have not idea why t he does not burn it. I can offer you:

    1. use a high quality like Dvd - R verbatim media

    > I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

    2 maybe, he won't burn with Toshiba disc creator software update. Restore back factory settings and try again with the old version of Toshiba disc creator.

  • Bootmgr missing and I have tried using the recovery installation window and it fails. no operating system are loaded.

    Double post merged and deleted.  Post moved from XP to Vista forum forum>

    Laptop HP discharged linux os, linux is the only operating system on laptop... Loading Vista missing bootmgr, the recovery option window has not repaired the file. I have no operating system in SYSTEM RECOVERY WINDOW. I chose load drivers and I am looking at the OPEN window and the SOURCE and do not know what to do next or what file to select sources. I would appreciate your help. Thank you

    Hello

    Here's how to reinstall Vista as you no longer have a recovery partition.

    This can help you (download files and make your own DVDs):

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    ___________________________________

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do it for a small fee

    HP:

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143#N76

    ___________________________________

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Need help with the update server behaviors and deleting records

    I am 'trying' to use the update and delete record server behaviors and I can't get the redirection page to set up correctly. What I'm trying to do, is to have the redirection came up with the right records depending on the CompId page. It seems that it is taking the CompId and agreementId (which are my unique ID) and use them in the url of the redirection page. Also, it updates the table. Here is the url that appears after I have send the update:

    http://localhost:8888/dotweb/maintenance/agreement_home.php?CompId= & agreementId = 7

    Here is the code for the update page:

    Name of the document
    Signed?
    First name
    Family name
    Date of signature

    Pending patent, trade mark, Tradesecret and straightened to copy recorded
    Copyright KML designs 2009

    Can someone tell me why it would show the CompId and agreementId when everything I asked the CompId? Thanks for your help. Just in case, I enclose you an html version of this file. It must be a php file, but is not one of the allowed file types.

    CompId is not filled in the URL because you try to use the result of the rsAgree recordset object until the result of the recordset is created. However, you pass the CompId value via array $_POST as a hidden field.

    Change this line (52):

    $updateGoTo = "agreement_home.php?CompId=" . $row_rsAgree['CompId'] . "";
    

    to do this:

    $updateGoTo = "agreement_home.php?CompId=" . $_POST['CompId'];
    
  • Help required with error 0 xC0000001 when opening DULL of the start menu and also impossible to create the recovery Dell backup and restore file.

    I use computer dell laptop inspiron 15 5558 with 8.1 windows preinstalled in it.

    I wanted to reinstall windows but I have no recovery media. Also I'm unable to create a new recovery media from Dell backup and restore. Also, I am unable to open feel of backup and restore in the start menu as this error comes up on screen

    Its always not available on him would happen, rumors were that he should have been made available yesterday, but Microsoft decided not to release it yet:

    http://winsupersite.com/Windows-10/Windows-10-build-10586-heads-slow-ring-insiders

  • To call the function in sql and script call

    Hello

    I'll have a .sql script that returns the name of the partition and I need to run alter table Exchange partition something like this

    get_part. SQL

    COLUMN file_name new_value by sub_script_col

    accept the start_date char prompt arguments ' input start (exact): '

    accept the end_date char prompt "enter end date (exact): '"

    create or replace function get_part_name (p_date in date)

    VARCHAR2 is back

    date d;

    RETP varchar2 (30);

    spirit date: = to_date('4444-01-01','yyyy-mm-dd');

    Str varchar2 (32000);

    cursor c is

    Select high_value, nom_partition p

    of all_tab_partitions

    where table_name = 'TO_TEHBLNC ';

    Start

    for r in c loop

    Str: = r.high_value;

    run immediately 'select'. Str |' double ' in d;

    If p_date < d and d, then the spirit

    RETP: = r.p;

    spirit: = d;

    end if;

    end loop;

    return pter;

    end;

    Select get_part_name ('& 1') twice;

    ACCEPT user_yn PROMPT ' do you want to partion with < partition name > table? (Y, N) : "

    SELECT THE CHECK BOX

    WHEN TOP (LTRIM (' & user_yn')) AS 'y %. "

    THEN "insert_partition".

    ELSE 'do_nothing.

    END AS sub_script_col

    DOUBLE;

    @ &sub_script_col < partition_name >

    sub_script_col. SQL

    ALTER TABLE to_tehblnc

    SWAP PARTITION < name patition >

    WITH TABLE T1

    WITHOUT VALIDATION

    UPDATE GLOBAL INDEXES;

    I need to call once again for the sub_script.sql based on start_date and end_date, for example 1st January 2015 and January 5, 2015 I must first get the parition name and proceed to modify the table with that respective partition name returned by the function, so that it will be 5 times alter the table to swap partition

    I'll have a .sql script that returns the name of the partition and I need to run alter table Exchange partition

    This is just a continuation of your other thread

    For the name of the partition in the partition range table

    As I said it you do not have to know the name of the partition to make an EXCHANGE. I gave you an example in this other thread.

    ACCEPT user_yn PROMPT ' do you want the table to partition with ? (Y, N) : "

    That makes no sense at all. You cannot partition a table that is already partitioned. If there is a name for the partition and then the table is partitioned already - then ask why to partition?

    ALTER TABLE to_tehblnc

    SWAP PARTITION

    WITH TABLE T1

    WITHOUT VALIDATION

    UPDATE GLOBAL INDEXES;

    I need to call once again for the sub_script.sql based on start_date and end_date, for example 1st January 2015 and January 5, 2015 I must first get the parition name and proceed to modify the table with that respective partition name returned by the function, so that it will be 5 times alter the table to swap partition

    No - you don't have. Just use the code example I provided in your other thread. You don't need to know the name of the partition and use dynamic sql statements to make the Exchange.

    Just use PARTITION syntax as shown in the example.

    Do things the EASY way. Your code and the script is totally useless.

  • I think I have a virus called the guardians windows utility and I run microsoft security analysis not removed it. What can I do?

    It displays a page of scan and stops me to access different programs on my computer.

    Try running scan using Windows Defender version offline beta, take a look at:

    http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

    And

    http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

    If the problem has not resolved, then contact Support for Microsoft Security:

    https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&task=Diagnostics&mkt=en-us&St=1&wfxredirect=1

  • I've accidentally deleted from google as default search engine in the drop-down list and can't manage search engines

    I want in the drop-down list for ease of use, but are not all the addons I've tried... I am currently using 18.0.2

    Hello

    See:

    In the Manager at the bottom left there is a button to restore the default settings for search engines

  • Recovery gone HD and Bootcamp starts rained after the Mac HD reduction in disk utility

    With the help of El Capitan, mid-2012 17 "Unibody Macbook Pro Non-retine

    Hi, I am trying to disable SIP with csrutil but I can't use this method in the recovery mode. Why? I had a problem where I have narrowed my Macintosh HD partition in disk utility and now my Bootcamp partition became start older (data still there).

    I was going to fix the partition table that caused problems with the boot, but when I loaded the Recovery Mode the thing wouldn't start and cling to a completed loading bar (with the apple logo, it took a lot of time to get the bar too full).

    So, I deleted the recovery partition HD and reinstalled OSX to retrieve. Problem is, he does not come back. Right now I have 4 partitions - disk0s1 is EFI disk0s2 is Macintosh HD disk0s3 is Untitled (free space), disk0s4's Bootcamp.

    Is it possible to UN-mess-up my hard drive without losing data? Sorry!

    ShinkoNet wrote:

    With the help of El Capitan, mid-2012 17 "Unibody Macbook Pro Non-retine

    Hi, I am trying to disable SIP with csrutil but I can't use this method in the recovery mode. Why? I had a problem where I have narrowed my Macintosh HD partition in disk utility and now my Bootcamp partition became start older (data still there).

    I was going to fix the partition table that caused problems with the boot, but when I loaded the Recovery Mode the thing wouldn't start and cling to a completed loading bar (with the apple logo, it took a lot of time to get the bar too full).

    So, I deleted the recovery partition HD and reinstalled OSX to retrieve. Problem is, he does not come back. Right now I have 4 partitions - disk0s1 is EFI disk0s2 is Macintosh HD disk0s3 is Untitled (free space), disk0s4's Bootcamp.

    Is it possible to UN-mess-up my hard drive without losing data? Sorry!

    The way is to not lose data have a current backup plan in place.  How to create a clone of startup

    SIP is the Protection of the integrity of the system and is a security featutre is not supposed to be cancelled esp of the 'system' you are primed to which would frustrate the object, so it must be done in an another boot drive - in your case.

    Your best bet is maybe to start int Internet recovery - this is done by now the keys option command R to reboot.  And go from there.

  • Call the function in LabView from a DLL, and then access the global variable of DLL

    I've created a DLL in LabWindows with a function and structure.  I want to call the function from LabView and then access the overall structure.  I am able to call the function in the DLL with a "call library function node" and has access to the return value, but I can't understand how to access the overall structure.  The structure is declared in the header DLL with __declspec (dllimport) struct parameters file.

    Is it possible to access this structure without using the library of network variables?

    My guess is that you need two bytes of padding after "in_out" and another to two bytes of padding after "anin."  The reason being that ints are 4 bytes, and most of them C compilers will align on 4-byte boundaries.  The struct will naturally start to such a limit (in fact, in Windows, it will probably start to an 8 byte boundary).  If you then count bytes in your structure, you are 70 byte after "in_out."  70 is not divisible by 4, so you need 2 bytes more to reach the next 4 byte boundary.  You can also you could reorganize your struct so that "anin" follows "in_out" and this is probably the best option if it won't cause you other problems.

    Unlike most C compilers, LabVIEW compressed structures as closely as possible, without filling.  I don't know enough about the history of LabVIEW and internal parts to explain the reasons and to do this performance penalty, but, as choice of LabVIEW "endianness", it is probably a remnant of the first versions of LabVIEW that were running on the Mac.

    If for some reason you want to force your C struct to match package LabVIEW, you can use the #pragma pack (x) directive, but I wouldn't recommend that here because you can control the C and LabVIEW.

    EDIT: in the cases where it was not clear, add padding to your cluster of LabVIEW, insert appropriate size or items at the place desired in the cluster.

  • Laptop computer by closing the market and stop after using the recovery disk

    I installed a recovery for windows vista disk. Once all steps have been taken, the system fed up, loading all the desktop icons and start to close. I reinstalled the recovery disk again and still the same problem occurred. I can't use my laptop because keeping the unit shutting on and outside. Someone in the forum can help with this question.

    Thank you

    Sir Lawrence 2010

    Hello

    Are recovery disks actually wipe (formatting) and reload the operating system to factory State or just do one 'on top' reinstall leaving intact settings and data? You may have to the former in order to recover the functionality. If the process continues to fail, you should contact the manufacturer of recovery disks is an exclusive process which differs greatly between systems manufacturers. They do not use the method of standard installation of Windows Vista.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Pavilion dm1: how the recovery 2 and 3 disc (dvd) to be bootable on USB?

    Hi, my drive hard computers have crasched so I decided to buy a new hard drive and also the recovery kit that comes as a dvd discs. But given that the computer have any dvd player I need to move the data from dvd-drive to a USB key. So I use another computer to 'move' the data between dvd and usb (I use powerISO program, to copy the data into the ISO and make it bootable on a USB key).  To make the USB bootable for the first disc is easy because it contains bootable files but I don't know how the dvd 2 and 3 to be initiated through the USB, they do not contain startup files. So I did not be longer when the recovery program stops and application disk 2. Any suggestions?

    I found a solution, and it's a simple.

    Just move all *.wim DVDs 2 and 3 files to the directory disk 1 on the USB stick PRELOAD. I also changed the information in info.dat and the SSRD.dat (place in the Repertory of PRELOAD) file to not understand anything of disc 2 or 3, if necessary, I do not know...

    Info.dat:

    BOOT

    SSRD.dat:

    NumberOfDiscs = 1
    SOURCE_ROOT = C:\RM\Image\
    UP_SIZE = 69631
    UP_OFFSET = 204800

    After that, it was only to start the computer, press ESC and select boot from a USB...

    * Note. The USB is made bootable for disk 1

  • Is it possible to recreate the recovery partition?

    I have this satellite plu pro which used to have as usual, a recovery partition on the HARD disk to restore to factory settings. I created a backup disk (in fact, I created it on a USB key) using the Toshiba backup disc authoring program then wiped the drive HARD clean, including the recovery partition. I have come to the point now, but where it would be useful to have that DOS partition and I wonder if it is possible to restore it to how it was originally?

    On the top of my head, I thought that maybe all I would need to do was wipe the HARD drive again, he re-partition, and then create a new partition, call the recovery and then simply copy the content of the key USB/disk backup for this partition. It would even work, or I have to do anything in particular. Assuming that it is even possible with this method?

    Thank you!

    Posted by bollokan
    On the top of my head, I thought that maybe all I would need to do was wipe the HARD drive again, he re-partition, and then create a new partition, call the recovery and then simply copy the content of the key USB/disk backup for this partition. It would even work, or I have to do anything in particular. Assuming that it is even possible with this method?

    Thank you!

    Hello

    You can't do anything manually. If you want to have "initial state" again only thing to do is to reinstall the original recovery image using a created recovery media.

    Before installing recovery image starts the disk HARD integer will be removed, new partitions created recovery image is copied on the HARD disk and as final step recovery image is installed.
    Recovery of installation image and you will have "factory settings" again.

  • How the recovery disk creator actually works?

    I read on the forum on the recovery disk creator and I'm a bit confused... in the name, it becomes obvious that he is indeed a creator, but I have no thread caught my attention which in fact is to create a recovery disk. How does it work? Of course, it is used to restore the system to the default settings, but you can make your own backup copies recovery of the State, the system is now? Or do all the recovery discs take you where it all begun so to speak...

    And if I could create my own presets, restrictions on the amounts of images? And he brings with him all that is installed in the time that the image was created?

    As I made clear in my previous posts, I have not bought the thing... It's in the mail. I'm just getting ready for the terrible experience of how things can go wrong when I don't have the original DVD of Windows in my hands :)

    Thanks in advance!

    Hello

    So many questions! I'll try to help you with unclear words.

    In the latest Toshiba has delivered laptop computers equipped with recovery media. Very old computers laptop Toshiba created mainly two CD recovery and newer laptops a Recovery DVD.
    This recovery DVD was in the box with the notebook.

    This recovery CD/DVD contains a recovery image. Recovery image can be installed on the laptop and after that each installation of the laptop will have factory settings the same state that you have when you start your laptop for the first time.
    Recovery image contains the system operations, drivers, Toshiba and utility tools and some additional software. Therefore, after you install the recovery image, you should not install drivers or additional software. Everything is done for you.

    Then, new notebooks, as your Satellite Pro A300-1EA, are not delivered with a separate recovery media and all those who buy the laptop must / should create a clean copy. This copy can be used for installations of operating system further. For recovery, multimedia creation Toshiba has designed special tool and it is designed to create recovery media ONLY.

    To start the tool, select the media you want to use (I recommend DVD - R), put the media in the optical disc drive and click Create.

    In fact the recovery image is saved on the HARD drive and placed on the second partition in the file called HDDRecovery.
    Still, there is one thing. If nothing is changed on the system, partitions, and if this folder is not removed, you can install operating system whenever you want, but without using recovery media.

    It is simply procedure. When the laptop starts press F8 and you will enter the advanced startup options. The first is called to fix my computer. Enter it and follow the on-screen menu. After two stages, you will see the window with several options and the last recovery option.

    So please create DVD to be on the right side of recovery.

    If you have any other questions please ask. Someone here will help you for sure.

    Good luck!

  • Re: Several questions about the recovery of the Satellite L750 features

    I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

    (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

    (2) will be the recovery CD is exactly the same as the recovery on the system partition?

    (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

    (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

    (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

    Hello

    I'll try to provide answers:
    1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
    2 - Yes.
    3 - Yes.
    4 - No. Don t be confused with this.
    5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

    In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

    If you have any other questions you are welcome.

Maybe you are looking for

  • Blue screen error: driver_irql_not_less_or_ equal 0x0000000D1 (0x0000E001, 0x00000000A.0x00000008, 0x0000E001).

    Original title: BSoD error w Windows Vista. I have a HP dv7 laptop. In October, my hard drive died, and I sent it to replace. Two months later I came back and install a new copy of Windows Vista Home Premium on it. Since then, I haver been getting a

  • I can't find the Recycle Bin

    icons does not show my office and I can also find the Recycle Bin. Somebody help here...

  • Kan inte instalera msn

    Mitt msn fungerar inte. NAR jag forsoker sign in, det skrivs att jag kan inte sign in cket jag anvander en version red av msm messenger. Och for att uppgraddera och jag som lokaL administrator pa den har datorn ion sign. Inte Forstar, hur ska jag gor

  • broken the 32-bit Vista installation disc

    broken installation disc - Vista 32 bit - tried to transfer the data from ide drive to sata drive - do not have a bit of luck - tried to install on a SATA (Vista) and cracked on the inside and don't drive will not read.

  • ATG Logging advice-isLoggingdebug or vlogDebug?

    Hi allPurposes of registration I see following two methods-isLoggingDebug and vlogDebug.Is there a difference between above two in terms of everything?Which method is the standard approach to use?Kind regardsPrateek Gupta